REPAIR AND MAINT OF INTERNAL ELECTRIFICATION INCLUDING GEYSERS AND FANS AT CADETS LIVING ACCN AND ADMINISTRATIVE BLDGS MH AT NDA KHADAKWASLA

Amount

Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / mirror lights/ table lamp lights in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like choke (ballast), tube rod, side holders, holders, lamps etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like Choke (ballast), capacitor, lamp holder,CFL, connector, connection wire etc) replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M. (iv) The contractor has to rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill. The repair/maint in Cadets living accommodation (Sqn bldgs) shall be carried out as per the timings convenient to cadets or as directed by Engineer-in-charge and preferably during afternoon and study period. The contractor shall engage separate team of technicians / repairer for each Battalion and a team for Training & admbldgs (v) The contractor shall maintain proper record of repair / maint in a binded register duly bringing out the details of spares replaced on each and every light fitting and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M against the supply only items here-in-below. (vii) The Electricians should be ITI (Electrical) qualified and the contractor should submit the copy of certificates of electricians while sigining the site orders.

Supply only following spares for light fittings of branded make as mentioned in the list of make enclosed with Particular specifications for replacement :- Retrofit pendant lamp holders suitable for table lamps or wall bracket light fittings or for ceiling lights

Brass lamp holder batten type suitbale for E27 base.

PVC / polycarbonate Angle/Batten type lamp holders retrofit type

High glow 9W,warm white ,180 degree range LED bulbs B22 base cap all as specified..Make:Luker Cat part:LBPC09CL or equivalent in Philips/halonix

High glow 3W, warm white , LED candle bulbs of E27 base cap all as specified..Make:Luker Cat Part:LBPC03CL or equivalent in Havells/Philips

Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces all as directed

M&L point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including Modular cover plate with frame alongwith PVC surface Box for modular type switches, sockets, fan regulator etc for following :- (a) One light/Fan point controlled by one way switch 6 Amps 240 volts Note : Quoted rate shall be deemed including modular cover plate frame and box

Ditto all as per item No above but One 3 pin 6 Amps socket out let point on independent board.

Ditto all as per item No 8 but One 3 pin 6 Amps socket out let point on same board.

Ditto all as per item No 8 but One light point controlled by two 6Amp two way switches .

M&L point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 19 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box suitable for 15 Amps socket outlet power point independent circuit

M & L in replacment of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided by the Site-in-charge.

S & F in replacement of switch piano flush type 5 Amps SP one way all as specified.

S & F in replacement of socket combination 5/15 Amps flush mounted 3/5 pin multi purpose all as specified.

S & F in replacement of Switch socket combination 5/6 Amps flush mounted 3 pin multi purpose all as specified.

S & F in replacement of socket outlet 3 pin 5A flush type complete all as specified.

S & F in replacement of socket outlet 2 in 1 3 pin 5 and 15 Amp flush type complete all as specified and directed

S&F in replacement for Modular socket 6A 2/3 Pin 2 module.

S&F in replacement for Modular socket 16A 2/3 Pin 2 Module.

S&F in replacement for modular switch 1 way 6A 1 module.

S&F in replacement for modular switch 1 way 16A 1 module.

S&F in replacement of modular fan regulator 120W,240V, 2module, suitable for ceiling fan of 1200/1400mm sweep

S&F in replacement for modular switch 2 way 6A 1 module.

M&L for securing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type ISI marked inclusive all accessories complete as specified and directed.

S&F in replacement for ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body.

S&F in replacement for white cover plate with frame 18 module.

S&F in replacement for white cover plate with frame 12 module.

S&F in replacement for white cover plate with frame 8 module.

S&F in replacement for white cover plate with frame 4 module.

S&F in replacement for white cover plate with frame 3 module.

S&F in replacement for white cover plate with frame 2 module.

S&F in replacement for white cover plate with frame 1 module.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 18 module.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 12 module.

S&F in replacement PVC unbreakable surface boxes suitable for modular switches 8 module.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 4 module.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 3 module.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 2 module.

S& F in replacement PVC unbreakable surface boxes suitable for modular switches 1 module.

S&F in replacement 1x20W,230V surface and wall mounted T5 LED batten ,extruded aluminium housing provided for efficient heat dessipation 1700 lumen output with color temperature 6500K including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified.

S&F LED tube light with diffused optics ultra bright LED tube light 20watt with high efficiency,integrated aluminum heat sink suited for installation in existing T8 tube light with G13 lamp holders all as specified.

S&F in replacement 1x20W,230V surface and wall mounted batten suitable for installing LED Tube including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified .

S&F 1x20/18 W,230V, (warm white)LED batten suitable for indoor application of color temperature 3000K surface /wall mounted LED batten including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified .

S&F 1x10W,230V, (warm white)LED batten suitable for indoor application of color temperature 3000K surface /wall mounted LED batten including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified .

Fixing only the ceiling fan of any sweep and connecting up including provision of twin core flexible copper cable from ceiling rose or connector to fan all as specified. (Note:Ceiling fan will be issued under Sch 'B' store free for fixing only)

Fixing only the exhaust fan of any sweep and connecting up including provision of twin core flexible copper cable from ceiling rose or connector to fan including repalcing the old plywood with new one not less than 10mm thick all as specified. (Note:exhaust fan will be issued under Sch 'B' store free for fixing only)

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed by Engr-in-Charge.

Material and labour for supply, installation, testing and commissioning of chemical earthing maintenance free earthing system comprising of Three numbers of 17.2 mm dia 3 mtr long Earth electrode of low carbon steel electrode with 250 micron copper bonding with 23 kg x 3 bags ECOSAFE carbon based backfill compound and suitable clamp including providing FRP pit cover of size 250mmX250mmX250mm complete as per manufacturer specification complete all a specified and directed by Engineer-in-charge. Note:- (i) Rate included for testing,commisioning including checking of earth continuity and earth result complete all as specified and directed. (ii) Venders are bound to get earthing result upto1 Ohm. (iii) Earth strip beyond 7.5 m shall be measured and paid separately. (iv) Rate is included for boring of earthing in any type of soil/rock. Make: (a) JEF Techno Solutions Pvt Limited (b) Ennov infra solutions (P) Ltd (c) Ashok safe Earthing electrode Ltd

S&F in replacement LED security light fiitting 20 W,IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete fixing with GI bracket made out of 40mm bore GI pipe light grade suitable length bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed by Engr-in-charge. Make:lLukar Cat Part:LSTE20(Sleek series) or equivalent in Havells / Crompton

S&F in replacement stator motor suitable for light duty fresh air ventilation fan of any sweep(approx 225/250mm) and replacing plywood of not less than 15mm with duly coated with synthetic enamel paint as per the existing arrangement.

M&L Sub main wiring with PVC insulated FRLS grade cable LT 1100 Volts grade PVC insulated unsheathed, multistranded with stranded copper conductor drawn through & including surface type PVC casing & caping/conduit including drawn on wall/ceiling/through stair case/wooden surface with all accessories and incl cutting of existing surfaces of any type and making good to match with the existing surfaces acrylic sheet work after completion alongwith one contineous earth wire and connected to common earth complete all as specified for following sizes of cable :- 2 x 2.5 sq mm with one contineous earth wire of size 2.5 sq mm Note : 2 runs of 2.5 sq mm cable and one run of 2.5 sq mm earth wire and PVC casing/capping will be measured as one meter.

Ditto as per item No 52 but 2 x 4 sq mm with one contineous earth wire of size 4.0 sq mm Note : 2 runs of 4 sq mm cable and one run of 4.0 sq mm earth wire and PVC casing/capping will be measured as one meter.

Ditto as per item No 52 but 2 x 6 sq mm with one contineous earth wire of size 6.0 sq mm Note : 2 runs of 6 sq mm cable and one run of 6 sq mm earth wire and PVC casing/capping will be measured as one meter.

Ditto as per item No 52 but 4 x 4 sq mm with two contineous earth wire of size 4.0 sq mm Note : 4 runs of 4 sq mm cable and two runs of 4.0 sq mm earth wire and PVC casing/capping will be measured as one meter.

Ditto as per item No 52 but 4x 6 sq mm with two contineous earth wire of size 6.0 sq mm Note : 4 runs of 6 sq mm cable and two runs of 6.0 sq mm earth wire and PVC casing/capping will be measured as one meter.

Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.

Taking down carefully three phase sub main wiring of any type and size and making good disturbed surfaces complete as directed.

Taking down carefully main switches and MCB DB / MCB /MCCB s of any type size and capacity and making good the disturbed surfaces etc

Supply and fix in replacement MCB DB 04 way SPN (double door) sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed by the Engr-in-Charge.

Supply and fix in replacement MCB DB 08 way SPN (double door) sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed by the Engr-in-Charge.

Supply and fix in replacement Vertical TPN DB 04 way (double door) sheet metal enclosure factory made suitable for MCCB 415 volts incomer and MCBs as outgoing with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed by the Engr-in-Charge. Make : Legrand Cat Part:5077 45 or equivalent in L&T/C&S

Supply and fix in replacement Vertical TPN DB 06 way (double door) sheet metal enclosure factory made suitable for MCCB 415 volts incomer and MCBs as outgoing with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site as directed by the Engr-in-Charge. Make : Legrand Cat Part:5077 45 or equivalent in L&T/C&S

Supply and fix inreplacement of MCB single pole 6-32 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve all as specified and directed.

Supply and fix inreplacement of MCB SPN 6-32Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve all as specified and directed.

Supply and fix inreplacement of MCB TPN 63 Amps working on 415 volts, 50 HZ AC, 10 KA ,'C' curve all as specified and directed.

S&F MCCB with rating of 100Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals.

S&F MCCB with rating of 150 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals.

Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed. Note : 1. Cost of spares such as capacitors, bearings etc will be measured and paid for separately under respective Item of sch A as supply only. Note No (iii) to (vi) below Item No 1 of this schedule are equally applicable to this item too.

Supply only capacitor of 1.5 mfd for ceiling fan/exhaust fan.

Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan.

Supply only capacitor of 4 mfd for air circulator/exhaust fan.

Supply only aluminium fan blade for exhuast fan of any sweep/make as per the sample given by the site-in-charge.

Supply only bearing No.6201/6202/6203/6204 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan of approved make

Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and refixing to original position all as directed by Engineer-in-charge. Celling fan of size 1200/1400mm sweep.

Ditto as per items No above but Air circulator fans size 600 mm sweep wall mounting Oscillating type

Ditto as per items No 75 but Wall mounted/Pedstal fans size 350/450 mm sweep Oscillating.

Ditto as per items No 75 but Exhaust fan of 350/450 mm sweep.

Ditto as per items No 75 but Exhaust fan of size 600 sweep 3 Phase

M&L for Preparation of old surface of exhaust fan of any sweep by removing old paint using paint remover or by burning off using blow lamp and cleaning with cloth and Spray painting complete exhaust fan with superior quality synthetic enamel paint (Smoke gray) after applying primer complete all as directed.

-Ditto- all as per sl item no 80 above but Air circulator/Pedestal of size 450/600 mm sweep with superior quality enamel paint (Grey) complete all as directed.

-Ditto- all as per sl item no 80 above but Ceiling fan of size 1200/1400 mm sweep with superior quality enamel paint ( Milk White) complete all as directed.

Disconnecting and taking down existing userviceable geyser of 100 ltrs capacity, taking it to civil workshop for repairing.Opening the geyser and dismanting all parts and taking out inner tank/container, removing dents making to shape including welding / brazing the leakage portion, filling the portion between inner tank and out casing of geyser with new glass wool heat insulating material . Reassembling and painting the outer casing of geyser with two coats of superior quality synthetic enamel paint(existing colors) and re- fixing to original place all as directed.

M&L in replacement safety valve(dead weight) suitable for geyser of 100 ltrs capacity of any type and brand of geyser.

M&L in replacement thermostat 0-70ºC suitable for geyser of 100 ltrs capacity of any type and brand of geyser. Make:As per the sample given by site-in-charge

M&L in replacement heating element of capacity 3 KW,ISI marked of any type and shape suitable for 100 ltrs capacity geysers of any brand / make. Make:As per the sample given by site-in-charge

M&L in replacement flow unit (inner pipe assembly) suitable for geyser of 100 ltrs capacity vertical type of any geyser brand including rubber ring/gasket.

Supply and fix in replacement GI mesh hot water connection 600 mm long including necessary washers suitable for geysers of various capacities complete all as specified and directed.

Supply and fix in replacement sheet metal enclosures double pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as directed by Engr-in-charge. Make: Legrand Cat part: 5078 10 or equivalent in C&S/L&T

Supply & fix in replacement neon lamp indicator square/round type.

Supply & Fix in replacement PVC insulated round cable 3 core stranded copper conductor 2.5 sqmm as in connection cord of the geyser

Supply and fix in replacement metal clad plug top 3 pin, 20 amps, ISI marked heavy duty for geyser connection cord.

Supply and fix in replacement of honor board LED (6500K) fitting of 1x12W individual lenses, silver chorme coloured. Make as per sample approved by Engr-In-Charge (For Cadet Mess and ATT)

S&F in replacement table lamp fittings white colored suitable for B-22 base cap CFL/bulb with necessary accessories including surface PVC box of circular/square type all as specified. Model: As per the sample provided by the Site-in-charge

M&L in replacement heating element of capacity 3 KW,ISI marked of any type and shape suitable for solar water heater system as per the sample given by Engineer-in-Charge.

M&L in replacement of ply wood sheet of 19 mm thickness for cover the MCB DBs and cutting to the size as required at the site including fixing the same with necessary nuts and bolt arrangement

M&L for repalcing the down rod of ceiling fans with 5 feet GI ceiling fan hanging down rod with necessary clamp accessories all as directed.

M&L in replacement of acrylic sheet of 4mm thickness cutting to the size as required at the site including fixing the same with necessary screw arrangement.

M&L in replacement for fixing the LED strip outdoor type warm white colored 14.4 watt,220V including fixing the strip on any type of surface using necessary clamp accessories.Make:Luker Cat part: LSO5050 or equivalent in Philips/Wipro/Havells

S&F in replacement of LED strip outdoor connector 220V with PIN

Supply & fix in replacement environment friendly, energy efficient, aesthetically designed, surface ornamented with rings, moulded body, ceiling light LED fixture with diffuser to give glare free light 15 watt LED. Make -Luker Cat Pt No LIPSRS15 or equivalent in Philips or Havells

M&L in repalcement recess mounting ceiling lights with recess type LED ceiling lights 18W LED 5700K, 240Volts with 35º spread optics with ceiling cut out of Ø 180 mm Environmental friendly, new generation, energy saving, recess mounted downlighter with separate replaceable electronic driver. including connecting with twin core wire including cutting false ceiling sheet to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed. Note : Ladders /Scaffolding shall be used and will be provided by contractor for dismantling /fixing of light fittings and cost for the same is deemed to be included. Make : Luker Cat part No LNPR 18 or eqvt in Havels /Polycab

M&L in repalcement recess mounting ceiling lights with recess type LED ceiling lights 18/20 W LED 5700K, 240Volts with 35º spread optics with ceiling cut out of Ø 170-175 mm Environmental friendly, new generation, energy saving, recess mounted downlighter with high power COB LED as light source & clear glass and separate replaceable electronic driver. including connecting with twin core wire including cutting the false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed.Note : Ladders /Scaffolding shall be used and will be provided by contractor for dismantling /fixing of light fittings and cost for the same is deemed to be included. Make : Luker/Havells/Polycab

M & L for Electronic driver for 30 watts COB lights Make should be as per the Existing manufacturer

M & L for Electronic driver for 20 watts COB lights Make should be as per the Existing manufacturer

Supply and fixing of ceiling fan of sweep 1200mm, 240 volts of not less than 3 star BEE rating milk white coloured connecting up with twin core 1.0 sqmm cable from ceiling rose including required length of hanging rod all as specified.

Supply and fixing of metal body high speed exhaust fan of 225 mm sweep inclduing replacing the plywood as per the site requirement.

Supply and fixing of Plastic ventilation fan of 200mm sweep inclduing replacing the plywood as per the site requirement.

S&F in replacemnt of high speed wall mounted fan of sweep 400 mm,,Full copper motor,auto thermal overload protection,compact style and powder coated gurads & pull cord switch for speed regulation and oscillation control including connectng up the power cord to the socket and necessary fixing accessories all as specified and directed.

S&F in replacement of 1 and 2 module Blanking plates complete all as specifed and directed by Engr-In-Charge

Supply and fixing of metal body Three phase heavy duty exhaust fan 600 mm or 24" sweep inclduing replacing the plywood and fixing with fastner,washer as per the site requirement.

M&L in repalcement surface mounted LED Panel lights size of 600mm x 600MM x 35mm 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Make : Luker Cat Part No LNPSRS40 or evqt in Havells/Philips Note: The quoted price shall include the cost of Light and its driver.

M&L in repalcement surface mounted LED Slim Panel lights dimension of 173mm x 20mm and ceiling cutout of Ø 153mm 12W 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Make : Luker Cat Part No LNPR12 or evqt in Havells/Philips Note: The quoted price shall include the cost of Light and its driver.

Deccan Enterprises

KESARI AND SONS

Sparkh Electricals & Works

M/S SHREE CONSTRUCTIONS