Certain repair to School furniture and other misc furniture at Tibri Mil Stn under GE Gurdaspur.

Amount

ALMIRAH STEEL LARGE (FD-1031) Removing of old unserviceable shelves and S&F of new 1.00 mm thick PBI Sheet shelves and fixing in position complete all as per drg and specified and directed.

M&L for welding to steel almirah large where required not exceeding 2.5cm in length of all as per Drg and specified and directed.

Removing of old unserviceable /broken legs and S &F new legs out of 1.00 mm thick PBI Sheet complete all as shown on Drg and specified and directed.

Removing of old unserviceable locks and S&F new locks to steel Almirah large best quality (as per existing size) as approved by GE complete all as per Drg and specified and directed.

All as per Srl item No 5 above but CP Handle (as per existing size).

Removing of old unserviceable paints and repainting of steel Almirah large with two coat of synthetic enamel paint in side and out side including prep. of surfaces complete all as per Drg and specified and directed.

ALMIRAH MED STEEL (FD-67(M), FD-1032 Removing of old unserviceable locks and S&F new locks to steel Almirah best quality (as per existing size) as approved by GE complete all as per Drg and specified and directed.

All as per Srl item No 08 above but CP Handle

Removing of old unserviceable paints and repainting of steel Almirah medium with two coat of synthetic enamel paint in side and out side including preparation of surfaces complete all as per Drg and specified and directed.

BOOK CASE STEEL (FD-90, FD-1028) Removing of old unserviceable Broken glass of shutter and S&F of new glass 5mm thick as per existing size fixing to the shutter of book case complete all as per Drg and specified and directed.

Removing of old unserviceable lock and S&F of new locks in book case all are operated by one key only complete all as shown Drg and directed and specified.

Removing of old unserviceable bow handle of the shutter and S&F new CP bow handle of same size complete as per Drg and specified and directed.

M&L for preparation of surfaces by removing of old paint, rust and dust and applying two coats of synthetic enamel paint OG complete all as specified drg, as directed.

CHAIR COMPUTER WITH OUT ARMS (FD/E6/MAP/01) S&F in repair base and pedestal assy of chair computer including hydraulic system all as per drawing and directed by Engineer -in-Charge

S&F in repair to foam and cushioned and tepestry cloths of seats, rest and back of chair computer as all per drg and as directed by engineer in charge(Note tepestry cloth shall not ledd than Rs 250 Rm)

Supply and fixing wheels of chair all as per drg and directed byEngineer-in-Charge.

Table computer (FD-/E6/MAP/03) S&F of top of table computer made out of prelaminated particle board (Both side teak face) 18 mm thick (exterior grade) all as per drawing and as directed by Engineer-in- charge.

S&F in side of table computer made out of prelaminated particle board (Both side teak face) 18 mm thick (exterior grade) all as per drawing and as directed by Engineer-in- incharge.

S&F in base of key board tray all as per drawing and as directed by Engineer-in- Charge.

S&F in drawer (assy) made out of prelaminated particle board (Both side teak face) 18 mm thick (exterior grade) with telescopic channel with alm anodised knobs all as per drawing and as directed by Engineer-in- incharge.

SOFA SET TO SEAT OF FIVE WITH CUSION(FD-1113) Supply of cushion covered 100 mm thick with best quality tapestry cloth for sofa set 5 seater having sitting capacity for five (one three seater and two single seater )complete all as per drg, directed and specified. (Make of cushion "Sleepwell/ Kurlon of 40 density ) Note:- 1. Tapestry cloth shall not be less than costing of Rs.200/- RM and shall be approved by GE . 2. The unit each set comprises of 10 No. cushions ( 5 for seats and 5 for back)

Chair Wirting (FD-20, FD-202 & FD-250) M & L for polishing of chair writing complete all as per drg, as specified and directed.

Re-canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drg and as specified.

DESK WITH SEAT 940 x 890 x 700mm ( CWE/ ASR/ 08/ C1/06) Removing of old UNSV wooden back & bottom seat of desk and S&F of new back & bottom seat made out of 1st class teak wood as per drg . S & F of top made out of MDF board 18 mm thick, side and bottom and box shall be polished with french polish extremely completed all as per drg and specified and directed

M&L for painting of steel frame with two coats of synthetic enamel paint over a coat of Red Oxide primer after prepration of surface complete all as per drg and specified and directed

M&L for welding to frame of desk where required notexe 2.5 cm in length complete all as specified and directed

DESK WITH SEAT 1120 x 940 x 850mm (CWE/ASR-08/E3/05) Removing of old UNSV wooden back & bottom seat of desk and S&F of new back & bottom seat made out of 1st class teak wood as per drg . S & F of Top made out of MDF board 18 mm thick, side and bottom and box shall be polished with french polish extremely completed all as per drg and specified and directed

M&L for painting of steel frame with two coats of synthetic enamel paint over a coat of Red Oxide primer after prepration of surface complete all as per drg and specified and directed

M&L for welding to frame of desk where required notexe 2.5 cm in length complete all as specified and directed

DESK WITH SEAT 940 x 920x 770 (CWE/ASR/08/C1/06) Removing of old UNSV wooden back & bottom seat of desk and S&F of new back & bottom seat made out of 1st class teak wood as per drg . S & F of Top made out of MDF board 18 mm thick, side and bottom and box shall be polished with french polish extremely completed all as per drg and specified and directed

M&L for painting of steel frame with two coats of synthetic enamel paint over a coat of Red Oxide primer after prepration of surface complete all as per drg and specified and directed

M&L for wlding to frame of desk where required not exc 2.5cm in length complete all as specified and directed.

CHAIR VERANDAH PPCP (FD/ MAP-II/15) S&F of PVC seat and back of chari verandah with 4mm thick PPCP sheet of Make : Harmony/ Amko as directed by Engineer-in-Charge.

S&F hard rubber shoes suitable for chari varandah complete all as specified and directed.

M&L for welding to chair varendah where required n. exc 2.5 cm in length complete all as specified and directed.

CHAIR DINING PVC SEAT (FD/MAP-II/05) S&F of PVC seat of chair dining with 4mm thick PPCP sheet Make :- Harmony/ Amko as directed by Engineer-in-Charge.

M&L for polishing of chari dinning complete all as per drg as specified and directed.

G S Builders