Conservation Development Works at Amber Palace, Jaipur for Promotion of Heritage Tourim

Supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :Upto 15 cm. thick. (B-6/6.18.1)

Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 50 mm Thick

Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide (B-9/9.8)

5 mm float glass

Supplying and fixing ashlar rain water spouts fine (3 lines) dressed as per approved design of size :Red Ashlar 60x30x25 cm

Carriage of Building Rubbish Stone Metal grit ballast etc.with a lead of 10 Kms.(G-4.1/4.2)

Fine grinded Gangsaw cut 30-35 mm thick stone flooring over 20 mm (average) thick base of cement mortar 1:4 (1 cement :4 coarse sand) jointed grey cement slurry mixed with pigment to match the shade of stone complete as per design drawing and instruction of EI.Pink sand stone (Bansi Paharpur stone)

Providing and Applying ACRYLIC emulsion polymer waterproofing chemical coating, on over roof on over roof slabs/terrace/balconies/parapet wall etc.with following method/specification: Paint the surface with regular paint brush so as to obtain approximately 0.3mm thickness coating. apply the 2nd coat next day at right angles to the 1st coat so that total thickness of the coating should be approximately 0.6mm coverage by using above formulation will be 40 ft2/ litre of chemical. painted surface does not require any external water curing since chemical will hold sufficient water for curing.After the primer coat Apply 2 coats of modified acrylic emulsion polymer water proofing compound having solar heat reduction properties coating @ 0.330 KG/SQM on the surface of the interval of 3-4 hours. Undulation on the surface is repair before the waterproofing work.

Mechanised cleaning of storage tanks comprises of following 6 stage as mentioned below :(i) Mechanical dewatering (ii)Desalting removal of leftover dirty water and sludge with sludge pump (iii)Cleaning of wall, ceiling and floor by high pressure water jet with help of equipments which creates a pressure of 100-150 bar (iv)Removal of remaing sludge from floor with the help of industrial vacum cleaner.(v)Spraying of non toxic, bio degradable ecofriendly and bacterial agent certified by a govt approved laborary to disinfect the tank from all harmfull pathogens. The dose should be safe as per the UECD guidelines & 23 adopted on 17 th december 2001.Above 1000 ltr.

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- B Based on RUIDP SOR 2023 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Lime Surkhi Plaster 1:2 (1 Lime : 2 Surkhi) including preparation of mortar by traditional practice (by grinding) in coarse for base coarse and subsequent coarse & Loi, tamping, beating, curring till the shrinkage cracks are disappear. The work is to be done with all lead as the work of restoration nature as per Jaipur practice including adding, gur, methi & gugal, on old walls including removal of all old loose and decayed plaster, each coat to be done after 3 days of previous coat. (a) 33 mm thick in four coats(C-3/3.1.1)

Deduct for plaster work if lime kara applying on plaster as finishing coat. 40.11

Providing & applying Lime Kara 1:2 (1lime cream : 2 Zikki powder) grinding mortar with grinding mill/manualy on lime base, on flat surface in two coats. First coat applying 3mm to 4mm. thick and curring properly at least 7 days, second finishing coat done after 7 days of previous coat as per traditional practice. (thickness not more then 6 mm.) 40.19

Add extra for Lime Kara work (on lime plaster base) other then flat surface as per traditional practice with all lead & lift with fine finishing complete in all respect on ….

(a) domical surface / spherical surface / domical ceiling,(C-4/4.7.1)

(b) curved surface(C-4/4.7.2)

Providing & applying Lime Kara on stone work only having carving stone work/decorative stone work (stone pillars ,stone arches,railings etc.) as per traditional practices as per specifications with grinded mortar in two coats with finishing complete in all respect.

Providing and fixing fine dressed sand stone /approved stone traditional work as per existing matching geometrical design including moulding work with fine finishing, fixing with thambli by proper adhesive and white cement with pigment including making grooveete complete all respect.

Providing and laying lime Dhar on roofing as per Rajasthan, Jaipur traditional practice with lime, Surkhi, old lime powder, brick aggregate 12 to 20mm (1:2:2:2) and using Methi, Gur, Hemp, Belgiri etc. including beating and temping 100 to 150mm thick as per specifications. Including dismantling of old detoriated roofing40.29

Providing and fixing double leaf Door wooden shutters made of 1st grade M.P. teackwood as per traditional design (Deshi pattern) planks thickness 40mm and width of Binies, Andheri 50mm and thickness 35mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle etc.) as per existing matching / as per approved design with moulding / carving complete in all respect. M.P teak wood grade Ist40.35.1

Providing and fixing double leaf Window wooden shutters made of 1st grade wood as per traditional design (Deshi pattern) planks thickness 25mm and width of Binies, Andheri 35mm and thickness 25mm, including Adwa etc. with fittings (nails, sankal, kunda, cheri, handle and patti etc.) as per existing matching / as per approved design with moulding / carving complete in all respect. M.P teak wood grade Ist(40.36.1)

Chemical treatment of sand stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks joining of gaps / pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent from algal growth and make the stone water proof.(40.43)

Chemical treatment of marble stone to clean from yellowness, blackness, algal growth, dust, dirt oily accretions, lime & gypsum deposits, filling of cracks joining of gaps / pointing, strengthening of weak stone, removal of salt effect and application of preservative coating to prevent from algal growth and make the stone water proof.(40.44)

Scraping & Removing of white wash/ distemper/algli etc. from plain plaster & surfaces gently with care to keep intact the old designs.

Khameera Colour Washing as per traditional practice to prepare the Khameera the lime should be slaked at least for 7-10 days and regularly it should be stirred by adding curd Gugal, for non-synthetic colour adding gum (babool gum) as per specification. Then applying prepared solution on walls three to four thin coats as desired finishing. (40.17)

Deduct for khameera work if kangoora / design / lining work not done

Providing and applying breathable, non-reactive, transparent, antifungal, UV resistant, alkaline stable, impregnable silane-siloxane or equivalent based water repellent coating on exposed absorbing substrate like stone surface/ concrete surface/ mineral painted surface / exposed brick surface / lime surface in two or more coats to give uniform finish surface in all heights, horizontal, inclined, vertical and on ceiling complete in all respect and making it complete water-proof as per direction of the Engineer-in-charge.(40.38)

Tuman masonry by brick bats/ stones in grinded mortar of Lime Surkhi mortar 1:2/lime sand mortar 1:2 including racking and removal of all old loose plaster and cleaning the wall surface properly as per direction of Engineer Incharge. 40.22

Conservation of plain araish in monuments by cleaning of the painted surface from dust, dirt, greasy & oily all types of accretions with the help of suitable chemicals, removal of cracks and holes, consolidation of plaster, filling of the lacunae in the plaster, treatment of salt effect, restoration of the lost portions and providing a preservative coating.40.46

Conservation of coloured araish with designs in fresco technique in monuments by cleaning of the painted surface from dust, dirt, greasy & oily accretions with the help of suitable chemicals, removal of cracks and holes, consolidation of plaster, filling of the lacunae in the plaster, treatment of salt effect, retouching of the lost portions and providing a preservative coating.40.47

Percentage BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE Part- C Based on A&M BSR 2011 (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Random Rubble stone masonry for superstructure, 4.50 mtr. Height above plinth level / one storey height, above 30cm.thick walls in Lime surkhi mortar 1:2 : ( 1-Lime Putty : 2-Surkhi, including adding admixture like gur, methi etc. in mortar) (C-5/5.25)

Providing and Fixing fine dressed sand stone /approved stone "Chajja" for palaces,chattries,forts and jharokas with fine dressed surface both sides and front edges should be round shape/moulding, fixing in grinded lime surkhi mortar 1:2 joint flush with proper adhesive with pigment to match the shade of stone (thickness of chajja on front edge 50mm and 75mm on fixing end) exposed surface is to be measured only.(C-5/5.10)

Providing, casting, curing, erecting and fixing in position Lime Jali (lime lattice ) 40mm to 50mm thick as per existing design and pattern with grinded lime surkhi mortar 1:2 adding gur, methi gugal etc. as per specification complete in all respect including all scaffolding.(C-7/7.3)

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE PART " D"BASED ON NON BSR (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Oiling with linseed oil (two or more coats) on wooden doors & windows and wooden railing at variuas place in Amber Palace including filling of craks & preparation of base with putty etc. painting two coats of antitermite paint by using chemical emulsion as per IS : 10013 (Part III)-1989 and Painting two coats with oil type wood preservative of approved brand complete in all respects as per direction of Engineer In Charge including all leads and lifts.

Refixing and repair of heritage wooden chool doors and windows with required fitting such as nails, sankal, kunda, cheri, handle,hinges etc.and providing and fixing new stone frames/old frames if required complete as per direction of Engineer in charge

Removal and Refixing of Stone Chhaja 50 to 75mm thick stone used to be similar to the existing ones at the site cutting in proper shape and providing interlocking keys in the new as well as old stone for proper bonding including finishing the edges in all respect in lime surkhi mortar ( 1 lime putty : 2 Surkhi)

Providing and fixing of Makrana white second quality Marble stone flooring table rubbed, 14-20 mm thick over 20mm (Av.) thick base of Cement Motor 1:4 including coting of white cement under stone. Jointing with white cement with pigment to match the shade of the marble: grinding, rubbing and mirror polishing complete. Makrana white second quality plain of size 23" x 23" white cement underlay of stone Complete as per direction of engineering incharge (marble sample to be approved by engineering incharge before executing the work).