Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.3 LAccepted-AOC 12 MALIKPUR GURDASPUR ROAD SARNA PATHANKOT PUNJAB 145025 | PATHANKOT | PUNJAB | 145025 | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹30.9 L+₹2.4 L (8.60%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
8 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Pathankot
GE (AF) Pathankot-145001
REPAIR CLEANING OF SWT IN TECH AREA AT AIR FORCE STATION PATHAKOT
2022_MES_556454_1
8421/GE/PAF-45/2022-23
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE (AF) Pathankot
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Pathankot
₹70,000
Yes
7 Jan 2023
8 Oct 2022
10 Nov 2022
8 Oct 2022
8 Nov 2022
25 Oct 2022
Amount
Treatment of all concrete defects including opening the joints / cracks such as cold joint, construction joints, cracks, corner joints and area around honeycomb in the RCC of raft slab and column/ footing/ retaining wall by forming V / U shape groove with approx 15mm x 15mm size thereafter providing and applying a bond coat of Smart Care Multipurpose polymer in the groove thereafter sealing the groove with polymer modified mortar, complete all as specified and directed by Engineer-in-Charge.
Injection grouting wherever required, grouting the joints through PVC injection nozzles fixed @ 1M c/c or less, using cement slurry grout with smartcare injection grout added @ 250 gm per bag of cement to full saturation etc, complete all as specified and directed by Engineer-in-Charge.
Supplying and applying two component elastomeric acrylic polymer modified cementitious water proofing coating obtaining a consumption of 3 KG/Sqm in 2-3 coats, smartcare damp block 2K or approved equivalent, having 100% elongation as per ASTM D 412, resisting 5 bas hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificates from laboratories like CFTRI. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing etc. complete all as specified and directed by Engineer-in-Charge.
Protection screed/ render : Application of screed/ render admixed with smartcare multipurpose polymer @7% of the cement weight to achieve thickness of 15-20mm screed and 10-12mm render as per approved methodology, complete all as specified and directed by Engineer-in-Charge. Note:- For item no 1 to 4 (i) The treatment will be executed by the authorised applicator only after take nacessary approval from GE.
Demolition of cement concrete (un-reinforced) in any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge.
Material and labour for 75mm thick PCC 1:3:6, Nominal mix, type C2, using 40mm graded crushed stone aggregate as in plinth protection, surface finished even and smooth without using extra cement including forming and filling of joints with bitumistic filling in proporation of 1:6 by weight, complete all as specified and directed by Engineer-in-Charge.
Material and labour for 100 mm thick PCC 1:4:8 type D-2 (40mm graded crushed stone aggregate) as in sub base complete all as specified and directed by Engineer-in-Charge.
Material and labour for 100 mm thick, plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in footpath/hard standing and finishing surfaces of concrete even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge.
Rendering of 15mm thick in cement mortar 1:3 on fair faces of brick surfaces or concrete surfaces using integral water proofing compound, surface finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge. Note : Integral water proofing compound shall be measured & paid for seperately under respective item.
Supply only liquid water proofing compound, complete all as specified and directed by Engineer-in-Charge.
Preparation of new plastered or concrete surfaces of walls and applying two coats of cement base paint of any tint over a coat of cement primer, complete all as specified and directed by Engineer-in-Charge.
Dewatering of reidual water, disilting and cleaning of SWT of capacity 20000 Gallon as described below ;- (a) The inner surface of wall of tank shall be cleaned with scrapping and cleaned with high pressure jet pump after empty the water in tank. (b) After throught cleaning of the tank ,the cleaning water, vegitation and sludge is to be removed by using pump, and sludge and vegitation has to be disposed off at a place as directed. (c) After made the tank dirty free, the inner surafce of the tank shall be kept dry for 24 hours to findout the deffects repair and white wash .(b) The rate quoted shall be deemed to be is inclusive of cost of bleaching powder or any other cleaning agent to be used for tank cleaning .(c) Cost of earthwork and excavation at places is included in unit rate of this job.
All as per item No. 14 above but SWT of capacity exc 10000 gallon but n exc 15000 gallon complete all as specified and directed by Engineer-in-Charge.
All as per item No. 14 above but SWTof capacity n exc 10000 gallon complete all as specified and directed by Engineer-in-Charge.
Preparation of newely surfaces and applying two coats of white wash over newely treated surface complete all as specified and directed by Engineer-in-Charge.
Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any not exc 4 kg/sqm complete all as specified and directed by Engineer-in-Charge.
Dismantling framed fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section complete all as specified and directed by Engineer-in-Charge.
Supply, fabricate & Fixing Structural steel/square/ round tubular /box section ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade St. 240 complete all as specified and directed by Engineer-in-Charge.
Supply and fixing welded steel wire fabric Not exc 4 Kg/Sqm welded to steel members complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 100mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed by Engineer-in-Charge.
Preparation of new steel surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed by Engineer-in-Charge.
Supply and fixing Plates (plain or chequered) Fe-410-B W(Gde,E-250) quality channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment and including welding complete all as specified and directed by Engineer-in-Charge.
M/S G P MARWAHA
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .