SPECIAL REPAIR TO BOATSWAIN STORE NEAR PARADE GROUND BLDG NO P31 UNDER GE P NAVY MANDOVI

Amount

Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling wooden fillets , rafters, posts , purlins under 40 sqcm in section and of any description complete all as specified and directed.

Dismantling PCC Floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to stores and removing debris to a distance exc 250 m and not exc 1000 m spread and leveled complete all as specified and directed.

M&L for Broken stone boulder Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for Cement concrete 100 mm thick in floors type B- 2, 1:2:4 (40mm graded stone aggregate) finished even and smooth without using extra concrete complete all as specified and directed.

S & F Plastic dividing strips, 1.5 mm thick and width of strip 38 mm complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-290(Gde E-165) complete all as specified and directed.

S&F Steel Gusset plates Fe-290 Gde E-165 ( Plain or chequered) forming holes, fixed independently complete all as specified and directed .

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe-290 Gde E-165 all as complete specified and directed.

M & L for two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome primer complete all as specified and as directed.

M & L for two coats of synthetic enamel paint on steel & iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint, including preparation of old surface and applying one coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws complete as specified and directed.

S&F polycarbonate sheets 2mm thick transparent 3 mtr long , UV protected with 10 years warranty complete all as specified and directed.

Taking down cement plaster of stone /Pcc block /brick wall / top of chajja, or concrete surface of any description including raking out joints hacking for key securing down with water etc and removal of debris to outside of INS Mondovi Area including filling of open joints in cement mortar 1:6 complete all as specified and directed.

M & L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finish even & smooth without using extra cement complete all as specified and directed.

M & L for 15 mm thick (10+5) rendering in cement mortar 1:4 on fair faces of brick work or concrete surface with liquid WPC as per manufacturer instruction and finished surface even and smooth without using extra cement complete all as specified and directed. Note - liquid WPC shall be measured and paid separately

Supply only WPC, complete all as specified and directed.

M & L for 2 coats of anti fungal paint for newly plastered surfaces , on external surfaces ( wall facia cornices etc) and applying 1 mm true care wall putty wherever required of Equivalent make and applying two coat of 100 % anti fungus acrylic emulsion exterior grade paint (white & blue) over a coat of acrylic primer in approved shade and as per manufactures instruction & including necessary scaffolding etc complete all as per specified annd directed by Engineer-in-charge.

M&L for newly plastered surfaces preparatory to distempering, Priming plastered and other surfaces with alkali resistant priming paint, 1mm thick wall care putty & distempering walls with two coats of distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for applying one coat of acrylic emulsion exterior paint (Anti fungal paint) on old decorative surface of wall, ceiling cornices including preparation of surfaces by brooming scrapping down dust particle, smoke soot, moulds, moss and efflorescent salts etc and making surface smooth by applying ready mix putty where required complete all as specified and directed.

M&L for complete removal of existing treatment for preparation of old plastered surfaces preparatory to distempering, Priming plastered and other surfaces with alkali resistant priming paint, 1mm thick wall care putty & distempering walls with one coat of distemper oil emulsion, white or tinted complete all as specified and directed.

Demolition of cement concrete of any description in any position not otherwise specifically provided for complete all as specified and directed.

M & L for Cement concrete75mm thick cement concrete type C-2 ,1:3:6 (40mm graded stone aggregate ) as in plinth protection finished even and smooth without using extra cement complete complete all as specified and directed.

M & L for screed Bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes all as complete specified and directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors (over plinth protection) with grey cement and no pigments complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework, precast concrete articles and precast concrete block walling complete all as specified and directed.

M&L for precast PCC type C5 block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M & L for Formwork to sides and soffits of floor or roof beams, beam hauntings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc for Flat fair finished surface of concrete complete all as specified and directed.

Demolition of Concrete Reinforced of any description and in any position not otherwise specifically provided complete all as specified and directed.

S&F Mild steel TMT (CRS) bars 10mm dia. & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to complete all as specified and directed.

M & L for nominal mix of concrete for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like type B1 1:2:4 (20 mm graded stone aggregate) complete complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) not exc. 1.5 sq m each complete all as specified and directed.

S&F aluminum powder coated window/ventilator shutter including frame , any type (sliding or open-able ) with frame & other similar work etc fabricated by using the approved make section including necessary arrangement to receive 4mm thick sheet glass or wire mesh with aluminium channel beading, stainless steel screws, rollers, mortise lock & frame including the cost of rubber gasket / rubber beading rollers, mortise lock & frame etc complete . Note :- (i) Sheet glass & wire mesh shall be measured & paid separately complete all as specified and directed. (ii) But the weight of the rubber gasket / beading rollers, mortise lock will not be measured with weight of aluminium shutter.

S&F Powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including stranded aluminium frame of 'F' section of size 23.4x15.3x1.4 mm thick all as per manufacturer's instructions complete all as specified and directed .

S&F 4 mm thick Sheet glasses for aluminium window/ventilator, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each panel complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

M&L for jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor complete as per specified and directed. Note: Reinforcement shall be measured and paid separately.(Rates including jacketing, formwork and micro concrete)

M&L for preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint on any description not other described over 10cm width or girth complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and applying one coat of synthetic enamel paint on description not other described over 10cm width or girth complete all as specified and directed.

Taking down carefully copper / aluminium point wiring ( Light, fan socket or power) complete including fitting and fixture such as switches,ceiling roses, pendants, regulators, socket, light fitting ect removing material to store for keeping in safe custody or for taking redit( credit for above item should be made as as per condition separately) and making good disturbed surface of walls, floors ect complete all as per the existing finish complete all as specified and directed.

Taking down DB TPN, Main Switch, Sheet metal enclosure complete all as specified and directed.

Taking down submain wiring complete all as specified and directed.

M&L for Point wiring (Fan / Light) complete with 1100volt grade PVC insulated unsheathed multi stranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLHS drawn through and including rigid PVC conduit duly concealed in wall/ceiling including making good disturbed surface , painting to match with existing and provision of 1,5 sqmm PVC unsheathed copper conductor and connected to earth dolly, including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches sockets concealed on wall and complete all as specified and directed.

All as per item No 45 above but 5 Amps switch socket combination on independent board complete all as specified and directed.

All as per item No 45 above but 5 Amps switch socket combination on same board complete all as specified and directed.

All as per item No 45 above but one 6 pin socket outlet 15 Amps independent/metal plug and socket with cables 2.5 sqmm size copper cable multi stranded complete all as specified and directed.

S & F ceiling rose 3 terminal PVC polycarbonate isolating body complete all as specified and directed.

Supply and fix switch piano, flush type single pole ,one way 5 amp complete all as specified and directed.

Supply & Fix switch socket combination 2 in 1, 6 pin and 5 Amps flush type complete all as specified and directed.

Supply & Fix switch socket combination 5 in 1, 6 pin and 15 Amps flush type complete all as specified and directed.

S & F Electronic step type fan regulator 230 Volts, AC, 50 Hz complete all as specified and directed.

S&f LED tube light fitting 1 X 20 watt baton integrated LED chanel integral sleek extruded polycarbonate LED channel with white acrylic cover alonwith LED tube ROD 01 No including flexible wire three core from existing ceiling rose to fitting duly mounted on PVC block with steel screw & sleeves complete all as specified and directed.

Supply & Fix sheet metal enclosure for MCB's (D.B) TPN 4- way with 200 Amps rated bus bar double door 415 volts complete all as specified and directed.

Supply & Fix sheet metal enclosure for MCB's (D.B) 4 way (SPN) with 200 Amps rated bus bar double door 240 volts make complete all as specified and directed.

Supply & Fix MCB 06-32 Amps 240 Volts single pole 'B' series all as specified and directed.

S&F MCB TPN 40-63 Amp 415 volts 'B' series all as specified and directed.

Supply and fixing of MCB DP 32 Amp 230 Volt 50HZ AC supply all as specified and directed.

S&F exhaust fan 300 mm sweep with louvers complete with suitable accessories and fixing arrangement single phase 230/240volt AC supply 50 HZ including making holes and PCC work and including Taking down old u/s Exhaust fan of any size from the existing location and deposit to MES store yard all as specified and directed.

M & L for Submain wiring with 4 sqmm 2 Runs of single core multi stranded PVC in related unsheathed cable FRLHS1100 Volts with copper conductor drawn in and including PVC conduit concealed in wall and with all accessories such as tees, elbows, junction box Reducers etc as required along with 1 Run of 4 sqmm single core PVC insulated unsheathed copper conductor as earth wire and connecting to Existing main switch board \ Distribution Board and testing on completion complete all as directed. Note : 2 runs of 4 Sqmm cable, 1 run of 4 Sqmm PVC insulated, unsheathed, single core, multi stranded copper conductor cable and 1 run of PVC conduit 25mm/32mm wide concealed in wall shall be measured as single run.

M&L for earthing complete with steel earth plate electrode 60cm x 60cm x 6.3 mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr below ground level) with top edge of plate not less than 1.5 mtr below ground level connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers etc including protection pipe 15mm dia up to 7.5m length , provision the earth lead to earth connection in their main distribution box with lugs and GI nuts, bolts, earthing shall be done all as per shown in electrical plate No 3 of SSR part 1 Including necessary excavation disintegrated soft rock, filling earth of 15 mm thick and provision of earth pit provision of 20mm dia GI funnel PCC earth chamber 100mm thick, precast RCC cover with suitable precast RCC frame and earth test point and testing in presence of Engr -in -Charge Note: GI earthing 4mm upto 7.5m height is deemed to included under quoted rate.

Supply, lay, joint test and commissioning of LT XLPE cable shielded core type wrapped with tape screwed galvanized strip armoured over all sheathed aluminium conductor cable suitable for earthed system for 1100V 4 core AC 50 cycle. 16 Sqmm complete all as directed by Engr-in-charge. Note: Excavation, earthwork and sand cushioning shall be measured and paid separately.

Excavation in trenches n.exc 1.5M wide & n.exc 1.5m in depth for laying & removing of cable any sizes and getting out in soft disintegrated rock/ laterite rock complete all as specified and directed.

Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata complete all as specified and directed.

Removing excavated soil to a distance n.exc 50m, depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and directed.

Supply & Lay dry river sand in trenches for cable protection All as SSR Part I. NOTE : Punned thickness only will be measured & Paid complete all as specified and directed.

Supply and lay precast concrete cable cover LV type-1, flat size 250 X 150 X 40 mm complete all as specified and directed.

M & L for plain cement concrete type C2 (1 : 3 : 6 ) using 40mm graded stone aggregate complete all as specified and directed.

S & F GI tubing light grade for cable protection 40mm dia complete all as specified and directed.

Ramesh Enterprises

SANTOSH CONSTRUCTION

M/s.GOODWILL ELECTRICALS

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD

SHREE SHIV SHANKER ENTERPRISE

Shree Ram Enterprises

M/S. M M S ENTERPRISES