Renovation of IEI, EEI to Vijay Baugh Section, SAD under Section-III of EandM Sub-Division, Workshop Division, APWD, Port Blair

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

a) Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

a) 5/6 A switch

b) 15/16 A switch

c) 3 pin 5/6 A socket outlet

d) 6 pin 15/16 A socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

a) 3 Module (100mmX75mm)

b) 6 Module (200mmX75mm)

Supplying of 20W LED batten with aluminium housing for T8 LED Retro lamp/flourescent tube light fitting Make -Bajaj - BCLAB20WWH LED P or equivalent in Crompton/ Havells/ Philips/C&S complete with all accessories etc. as required.

Supplying of 20W LED T8 Retro Tube light Make - Bajaj - BLRB 20W CW LED or equivalent in Crompton/ Havells/ Philips/C&S complete with all accessories etc. as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of AC ceiling fan 1200mm sweep Make :-USHA TECHNIX PLUS 3 STAR or equivalent in Bajaj/Crompton/Ortem/Khaitan/Havells complete with all accessories etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying of Pedestal Fan 400 mm Sweep Make :-USHA-HELIX (HIGH SPEED) or equivalent in Bajaj/Crompton/Ortem/Khaitan/Havells complete with all accessories etc as required.

Supplying and fixing of LED Adore lamp 7 W B22 WW 2 Star lamp Make:- Havells Cat.No.LHLDEUEEMC8R007 or equivalent in Bajaj/Crompton Greaves/Philips etc as required.

Supplying of 30W LED street light fitting Make:- LUKER-STRADA Street light sleek-LSTE-30 or equivalent in Havells/C&S/Philips/Bajaj complete with all accessories etc as required.

Installation, testing and commissioning of LED street light fitting including connection etc. as required.

Fabrication of metallic street light pole for fixing street light fitting of standard length of 4.5 meters but not exceeding 6.5 meters made out of 65mm dia and 25mm dia G.I pipe as support for ladder at about 80cm below from the top. Bracket for fixing street light fitting with G.I. Pipe of medium grade 80mm dia of length 30cm and 25mm dia of length 40cm including 32mm dia G.I. Nipple, G.I reducer, covering the top with GI plate, G.I bolts & nuts & painting with anticorossive redoxide and enamel paints etc as required. Supplying and drawing 1.5 mm FRLSH PVC insulated copper conductor, single core cable in the existing GI Pole as required. Supplying and fixing of SMC sintex box of size 140mm x 140mm x 95mm (inside diamension) Code No.GSJB 1414 including 01 No. 6A MCB (SP) i/c necessary GI Flat 20x5 mm i/c connection etc as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

a) Above 4.5 metre and upto 6.5 metre

Supplying of PVC insulated and PVC sheathed aluminium conductor armoured XLPE power cable of 1.1KV grade of following sizes etc as required. Make :- Havells or equivalent in Finolex/Polycab/RR Cables.

a) 3 core x 6 sq.mm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

a) 50 mm dia (OD-50 mm & ID-38 mm nominal)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

a) Upto 35 sq. mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

a) 12 Way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

a) Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, double pole enclosure including Double pole MCB (6-32A), 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. Make-Legrand Cat No. 507791 or equivalent in Havells/C&S complete with all accessories etc as required.

Supplying, installation, testing and commissioning of ASHLOK make SEE brand safe earthing electrode type-19, 50mm dia, length 2 mtrs (short time current -52.6 rms for 1 sec, peak-125.6) with back fill compound including providing masonary enclosure with cover plate having locking arrangement etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

JOY GURU ENTERPRISES

M/s G K Construction

JAY ENGINEERING

M K ENGINEERING