Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.0 LAccepted-AOC | L1 | Accepted-AOC THE LOWEST TENDERER | |
| 2 | L2₹21.2 L+₹1.2 L (6.09%)Rejected-Finance 37 A 19 3 B MADHU NAGAR AGRA UP | AGRA | AGRA | UTTAR PRADESH | 282001 | L2 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 3 | L3₹23.9 L+₹3.9 L (19.5%)Rejected-Finance | L3 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 4 | L4₹24.4 L+₹4.5 L (22.4%)Rejected-Finance NO 98 1 1C YOJANANAGAR LOHEGAON WAGOLI ROAD NEAR SIVBHA DARBAR HOTEL LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L4 | Rejected-Finance NOT THE LOWEST TENDERER | |
| 5 | L5₹24.8 L+₹4.9 L (24.3%)Rejected-Finance | L5 | Rejected-Finance NOT THE LOWEST TENDERER |
Tender Value
Refer Docs
EMD Value
₹52,500
Closing Date
16 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE MH AND RH KHADKI
Military Engineer Services Garrison Engineer MH and Range Hills Range Hills Road Khadki, Pune 411003
PROVN OF TRG SHED AND KITCHEN SINK AND PLATE RACK IN BLDG NO P19 P20 P23 TOTAL 27 QTR ORs GOVT MD ACCN AT AUNDH UNDER GE MH AND RH KHADKI
2023_MES_633716_1
8492/E8
Open Tender
Civil Works
Item Rate
180 days
GE MH AND RH KHADKI
AS PER TENDER DOCUMENT
8 documents required · 8 mandatory
₹500
GE MH AND RH KHADKI
₹52,500
9 Feb 2024
20 Dec 2023
18 Jan 2024
20 Dec 2023
16 Jan 2024
4 Jan 2024
20 Dec 2023 - 9 Jan 2024
Amount
Surface dressing n. exc. 15 cm deep in soft / loose soil complete all as specified and as directed.
Excavating in trenches, n.exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying cables, pipes etc. and getting out in soft / loose soil complete all as specified and directed
M&L for PCC M-7.5 grade (nominal mix) using 40mm graded stone aggregate in foundations, filling and mass-concrete complete all as specified and directed
Returning filling in including spreading, levelling watering and well ramming in layers not exc 25 cm all as specified and directed
Removing excavated material to distance not exc 50m and depositing where as directed at a level not exc 1.5m above the starting point all as specified.
M&L for RCC M-25 (design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and directed
M&L for RCC M-25 (design mix) as in columns, pillars, piers, posts and struts all as specified and directed
M & L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per Item No 8 here-in-before but 6 to 8mm dia bar.
All as per item No 8 here-in-before but 5mm dia and over and including 10mm dia as in stirrups, spacers and binders.
M & L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
M & L for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for Pre-cast cement concrete block masonry of PCC 1:3:6 Type C1 using 20mm graded stone aggregate with solid blocks straight or curved on plan, exc 6m mean radius and exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
M&L moorum/ red bajari filling in floor or paving laid in layers n.exc.,15cm thick spread levelled and rolled including watering
M&L for Hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces.
M & L for 75 mm thick cement concrete M-7.5 grade (nominal mix) using 40mm graded stone aggregates as in sub base of path/pavement allas specified and directed
M&L for 20-25mm thick machine cut machine polished Kota stone slab flooring laid and jointed in neat cement slurry mixed with pigment to match the shade including cutting and polishing & laid over and including 20 mm thick screed bed in CM 1:3 complete all as specified and directed by Engr-in-Charge.
M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work or concrete surface in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.
M&L for 75mm thick PCC M-10 grade (nominal mix) using 40mm graded stone aggregate as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement complete.
S & F hot rolled medium and high tensile structural steel of Fe-410W grade E 250 quality A conforming to IS 2062: 2011 as in compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and as directed.
S & F hot rolled medium and high tensile structural steel of Fe-410W grade E 250 quality A conforming to IS 2062: 2011 as in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.
S & F hot rolled medium and high tensile structural steel of Fe-410W grade E 250 quality A conforming to IS 2062: 2011 as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and as directed.
M&L for MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachmen Fe 410 -W(Gde-E- 250) quality-A
M&L for prepration of new steel surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed by Engineer-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws including dismantling old roof sheet CGI / PGI complete all as specified & directed by Engineer-in-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 ridge, eaves gutters with end stops,drop ends or nozzles etc as required at site,eaves board etc, fixed with self tapping screws all as specified and directed
Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605 mm x 605 mm in true horizontal level, hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side includingusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24 mm x 38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24 mm x 28 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200 mm x 600 mm and secondary cross “T” of length 600 mm and size 24 mm x 28 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 mm x 600 mm panel to form grids of 600 mm x 600 mm and wall angle of size 24 mm x 24 mm x 0.4 mm. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 mm x 37 mm x 25 mm x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 mm x 30 mm x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint with and including 4mm thick non-asbestos fibre cement building boards, applying three coats of white wash, complete for all heights as per specifications and as directed by Engineer-in-charge.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.
Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Supply & fixed 15mm bore fancy type long body bib taps, cast copper alloy, with capstan heads,chromium plated , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Taking down and fixing only old serviceable 15mm bore fancy type long body bib taps, received from site with fixture fitting as per requirement complete all as specified and directed.
Cutting chases, pinning in brick walls, making good to facing where required and pointing in cement mortar 1:3 and making good, cutting n.exc 10cm girth, all as specified and directed.
S&F plate rack made of stainless steel 1mm thick and overall size 750mm x 600mm x 250mm securing with nails or screw in wall of any description complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding/complete and removing rubbish off the premises complete all as specified and directed.
M&L glazed ceramic tiles (350 x 250 x 7mm or 450 x 300 x 7mm) colour tiles on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile & laid over 10 mm thick rendering as in back coat in CM 1:4, all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.
M & L for 20mm thick Granite slab machine cut in laid over cement screed and jointed with grey cement slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete laid over & including screed bed 15mm thick in CM 1:4 complete.
M&L machine cut cudappa stone slab 20-25mm thick over cement screed base laid or without and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, all as specified and directed.
Excavating in trenches, n.exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying cable / pipe etc. and getting out in hard / dense soil complete all as specified and directed
M&L for riddled earth cushioning to under ground cable in trenches / existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engineer-in-Charge Note : Measurement shall be taken after gentling punning.
Supply and laying reinforced precast concrete cable cover class LV, type 1, flat of size 250mm x 150mm x 40mm size for cable protection.
Supply and laying in trenches GI tubing light grade 40mm bore, ISI marked, for cable protection
Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core complete all as specified and directed by Engineer-in-charge.
M & L for point wiring with 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheated FRLS cable 1100 Volts drawn in and including PVC conduit Medium grade ISI marked of suitable size including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including "concealed" MS terminal box ISI marked with modular cover plate of suitable size as per site requirement for housing switch, socket, regulators etc complete for the following:-
One light point controlled by one switch
One Fan point controlled by one switch
One 5 pin 6 Amps socket outlet on independent board.
One 5 pin 6 Amps socket outlet on same board.
All as per item No 45 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100v grade PVC insulated but unsheheted single core multi stranded pvc insulated unsheathed copper conductor cable 1100 volts grade for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire.
S & F switch piano type 250 volts single pole one way 6 Amps all as specified and directed
S & F socket outlet 5 pin 6 Amps shuttered flush type all as specified and directed.
S & F socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type all as specified and directed.
S & F switch piano type 250 volts single pole one way 16 Amps all as specified and directed.
S & F PVC ceiling rose / Angle Holder / Batten Holder surface type three terminals type all as specified and directed.
S & F Circular LED High bay 80 Watt with tapered fin design and excellent thermal management along with IP 66 protection complete all as specified and as directed
S & F distribution board factory made SPN 8 way in, 240 Volt, Double door metal type suitable for fixing MCBs as out going and including SPN MCB 32 Amps as main incoming all as specified & directed. Note : MCBs shall be measured and paid seperately under relevant item of this BOQ.
S & F MCB SP 5 to 30 Amps 'B' series 10 KA with two position DIN Rail clamp.
S & F MCB DP 32 Amps 'B' series 10KA.
Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and including 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete. Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (ii) Testing the earth value and submit report for earth resistance result to Engr-in-Charge.
Supply and fixing ceiling fans complete with blades, down rods, electronic regulator/ remote and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor.
M/S J J ENTERPRISES
M/S SANDEEP CONSTRUCTION COMPANY
S.R.M.K Enterprises
Sarkar Enterprises
Gruham Luxe Interiors
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .