Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹8.3 Craccepted-aoc | ₹8.3 Cr | accepted-aoc |
Tender Value
₹9.1 Cr
EMD Value
₹13.7 L
Closing Date
20 Jul 2026, 10:30 pmClosed
Kalyana Karnataka Road Transport Corporation
Channana Boraiah
Construction of New Bus Depot for 50 Buses under PM-e Bus Seva scheme at Vijayapur.
KKRTC/2026-27/BD/WORK_INDENT209
KKRTC/2026-27/BD/WORK_INDENT209
Open
Buildings
Two Tender Document System(Two Cover)
Kalyana Karnataka Road Transport Corporation Head Office Kalburgi
7 documents required · 7 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
Should be a valid Class-I Civil Contractor registered in Karnataka CPWD/MES/KPWD. Upload Registration Certificate for the block period 2025-30.
Should have successfully completed in any Single work from last preceding 5 years. i.e., from 01/04/2021 onwards for any of the Govt./ Public Sector Corporate undertakings. Similar nature of building work, costing not less than Rs. 554.00 Lakh (Rs. Five hundred Fifty four Lakhs)Certificate of completion issued by an officer not below the rank of Executive Engineer, in case of Govt., / Public Sectors under takings.
Executed in any one financial year during last five years i.e 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 the minimum quantities of work. Reinforced Cement concrete 1107.16 Cum, Mild/TMT Steel work 119.71 MT, Brick Masonry 560.77 Cum, M-40 RCC (un-reinforced, Pavement concrete) 1420.36 Cum, Flooring Work 1706.94 Sqm, M.S Grill 5695.48 Kg, Structural Steel 22313.44 Kg Certificate of completion issued by an officer not below the rank of Executive Engineer, in case of Govt., / Public Sectors under takings.
Should have achieved a Annual Financial Turnover of Rs. 2216.00 Lakhs (Rs. Two thousand two hundred sixteen Lakhs) pertaining to civil works for any of 2 (two) financial years from last preceding Five years i.e 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 Upload a copy of audited balance sheet and profit & loss accounts statement certified by a Chartered Accountant along with Income Tax Return Acknowledgement for respective Years.
To Qualify for award of this contract the Tenderer has to furnish Liquid assets statement or availability of credit facilities for an amount not less than Rs. 332.40 Lakhs (Rs. Three hundred thirty two Lakh Fourty thousand)- letter of credit issued from any nationalized Bank / Schedule bank (excluding Co-operative banks ) in the prescribed format. Upload Scanned Copy of the Credit Lines / Letters of Credit / Certificates from any nationalized Bank / Schedule bank (excluding Co-operative banks), clearly specifying name of the work (as per the prescribed format) addressed to the Executive Engineer, KKRTC, C.E. Division, Kalaburagi. (Annexure-A)
To Qualify for award of this contract the assessed available Tender capacity of the tenderer should be more than the amount put to tender. Note: The bid capacity of the tenderer is calculated based on the formula as per KTTP Act. Assessed Available Tender Capacity Equal to ( (A X N x 1.5) - B) Where A Equal to Maximum value of Civil Engineering works, updated to 2025-26 price level, executed in any one year during the last five years. Completed as well as works in progress .B Equal to Value at 2025-26 price level of existing commitments and ongoing works to be completed during the next two years.N equal to Number of years prescribed for completion of the work for which tender is invited. 1.5 Equal to Multiplying factor for assessing the available tender capacity for works costing more than Rs.100.00 Lakhs. Contractor has to upload statement showing the maximum value of Civil Engineering Works executed in any one year, taking into account completed works as well as works in progress, during the last five years and statement of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the listed works. ie. During the years 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 Self Certificate as per the prescribed format , Annexure - B
Within 20 Days of receipt of letter of acceptance, the successful bidder shall deliver to employer an amount equal to difference of sanctioned and approved bid amount in the form of D.D/ Banker cheque / Bank Guaranty in favour of Executive Engineer KKRTC CE Div Kalaburagi. The same will be refunded after completion of work. (Attach self declaration certificate)
₹5,000
₹13.7 L
20 Jul 2026
2 Jul 2026
22 Jul 2026
15 Jul 2026
17 Jul 2026
Construction of New Bus Depot for 50 Buses under PM-e Bus Seva scheme at Vijayapur.
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on p...
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS. 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...
Construction of M40 grade un-reinforced,Cement Concrete Pavement with OPC/PPC/PSC dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3, coarse and fine aggre...
Vaccum de-wattering with vacum pump and suction mat and compaction with skin floater clubbed with floating disc including cost of generator HOM of machinery screed vibratory power floater blade and d...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...
KSRB 2.3 . Filling (new earth) Refilling available earth around trenches/pipelines, cables in layersnot exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead...
KSRB 2.8 . Providing and Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Do FOR FIRST FLOOR
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Do FOR FIRST FLOOR
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Do FOR FIRST FLOOR
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Do FOR FIRST FLOOR
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Do FOR FIRST FLOOR
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Do FOR FIRST FLOOR
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Do FOR FIRST FLOOR
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s ...
Do FOR FIRST FLOOR
VOL II SRP 106/12.55.1 Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, cover...
Do FOR FIRST FLOOR
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1.6 (1 cement . 6 coarse sand) inc...
Do FOR FIRST FLOOR
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix .1.4 (1 cement. 4 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Do FOR FIRST FLOOR
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix .1.6 (1 cement. 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster with cement mortar 1.4 (1 cement.4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of ma...
Do FOR FIRST FLOOR
Providing patti allround compound wall etc, with CM 1:3 and finished as per design and specification including scafolding etc, complete. Patti 10cm wide and 10 mm thick.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make co...
Do FOR FIRST FLOOR
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and ...
Do FOR FIRST FLOOR
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fitti...
Do FOR FIRST FLOOR
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surfac...
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08percentage and conforming to IS....
Do FOR FIRST FLOOR
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Do FOR FIRST FLOOR
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1.6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...
Do FOR FIRST FLOOR
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural...
Do FOR FIRST FLOOR
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc.complete as per design approved by Engineer-in-charge. SRP-...
Do FOR FIRST FLOOR
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position, binding and anchoring to adjacent...
Do FOR FIRST FLOOR
Constructing brick maconary inspection chamber of internal dimention 600 X 450 mm, and depth of 600mm ( Inner dimension ) with modular bricks of class designation 75 in Cm 1.6 bed concrete 150mm thi...
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Do FOR FIRST FLOOR
Supplying PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying, lowering, laying, jointing, testing and commissioning of Glazed Stone Ware Pipes of following dia, conforming to IS 651.1992,IS 4127 with latest amendments, including conveying to work site...
VOL II SRP 46/8.33.2 Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr/10 m² over an under coat of primer applied at0.75 ltr/10 m² of approved brand...
Do FOR FIRST FLOOR
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade .New work (two coats) over and including water thinnable priming coat with cement primer after th...
Do FOR FIRST FLOOR
Finishing walls with water proofing cement paint of required shade .New work (Two coats applied at 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust,...
Do FOR FIRST FLOOR
providing and placing on terrace ( at all floor levels) polythlene water storage tank IS.12701 marked with cover and suitable locking arragements and making necessary holes,inlets,outlets and overflow...
providing and placing on terrace ( at all floor levels) polythlene water storage tank IS.12701 marked with cover and suitable locking arragements and making necessary holes,inlets,outlets and overflow...
Do FOR FIRST FLOOR
KSRB 13-1.5. Providing and fixing to wall, ceiling, and floor galvanized/mild steel tube 40mm dia nominal bore with fittings (medium grade weight 3.72kg/mt) ‘B’ class including cost of all materia...
Providing and fixing Chlorinated Polyvinyl Choride(CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings the pipe with clamps at 1.00...
Do FOR FIRST FLOOR
Do FOR FIRST FLOOR
Do FOR FIRST FLOOR
Do FOR FIRST FLOOR
White Vitreous China Flat back wash basin size 450x 300 mm with single 15mm C.P. brass pillar tap SRP- Vol-II (133/14.7.7)
Do FOR FIRST FLOOR
SRP- Vol-II (126/14.13.2)White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.
Do FOR FIRST FLOOR
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing . SRP- Vol-I...
Do FOR FIRST FLOOR
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Do FOR FIRST FLOOR
VOL II 124/14.5.1 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush ...
Do FOR FIRST FLOOR
Providing and fixing C I Nahani trap of approved make confirming to ISI specifications and construction of cistern in CC 1.2.4 as per directions (Inclusive of cost of materials and fixtures) 12.5 cms ...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete. 15 mm nominal bore SRP- Vol-II (117/13.5.1)
Do FOR FIRST FLOOR
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 40 mm nominal bore SRP- Vol-II (117/13.4.3)
Do FOR FIRST FLOOR
Providing and fixing brass stop cock of approved quality 15 mm nominal bore SRP- Vol-II (115/13.3.1)
Do FOR FIRST FLOOR
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS . 15622, of approved make, in all colours, shades, e...
Do FOR FIRST FLOOR
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1.3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Do FOR FIRST FLOOR
Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...
Providing and laying heavy duty cobble stones 75mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC.Bathroom, cold a...
Do FOR FIRST FLOOR
Korean truff (Bijapur BS Approved Rate)
Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...
Providing and fixing Structural Steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel prim...
Do FOR FIRST FLOOR
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (plus 0.05 percentage) total coated thickness with zinc c...
Do FOR FIRST FLOOR
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made o...
Do FOR FIRST FLOOR
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel o...
Do FOR FIRST FLOOR
Hydraulic Excavator of 0.9 m3 bucket (J.C.B excavator) Levelling the ground SRP- Vol-I (A-45/50)
Hydraulic Excavator of 0.9 m3 bucket (J.C.B excavator) Levelling the ground
Providing & filling Quartz Sand (in Sand filter Media) including filling etc., complete SRP II/60/ 0781
Providing & Filling activated carbon as filter media in Settling tank
Supply,erection,testing & commissioning of electrical motor drivenend suction back pull out centrifugal pump capable of delivering,adequate LPM atrequiredhead.when running at 2900rpm directly coupled ...
Supplying Installing of Horizantal side wall Type ,Standard Response Standard Coverage, Sprinkler, K5.6(80),1/2 NPT, 68 Degree C, Chrome finish, UL listed.SRP- Vol-VI (90/15.94)
Supply,Installation,testing and commisioning electrically driven jockey pump of capacity 180.0Lpm at required head end suction type bronzeimpeller pumpoupledto electical driven motor with suitable HP ...
Supplying, installing, testing & commissioning approved make heavy duty (Class C) GI pipes and fittings confirming to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, check nuts, u...
Supplying installing, testing and commissioning of PN16 CI inchNon Return Valve inch confirming to IS 13039 with necessary bolts and nuts etc complete includes cost of all materials labour charges wit...
Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confirming to IS 13039 with necessary nuts & bolts etc., complete ---- etc.,complete as per specificaiton with all lead...
Supplying Installing,testing and commissioning of 63mm dia double headed Gun mental Hydrant Valve with flanged inlet 2Nos,stopvalve,spindle and castiron hand wheel.It has a 2Nos female instantaneous o...
Supplying Installing, testing and commissioning of 19mm dia 40.0m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or f...
Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as p...
Supplying Installing,of M.S.Pressed reel of 600mm dia swinging type motion which allows a 180 swing and conforms to IS.884/85 or Aluminium fitting Single Piece Compact Type.including cost of materials...
Supplying Installing, testing and commissioning of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with lacing arrangement and painted with two coats of Fire red Enamel paint at out...
Supplying Installing, testing and commissioning of Resettable type Manual Call point . works on 24V DC LED indicator with glass Fronted. Fire Symbol .The red Manual Call Point is approved to EN54-11 s...
Supply,install,test and commissioning of Analoguead dressable Monitor Cum Control (Input/Output) module (1plus1) within built relay and isolator with LED indicator,approved to peratein10 Ctoplus55 C t...
Supply, installation in position, testing and commissioning of Addressable Optical Smoke Detector radio-linked optical detector (smoke) operates with an optical sensing chamber based on the principle ...
Supply, installation, testing and commissioning of Addressable Wireless Conventional Wall Sounder with Beacon for providing Audible and Visual Alarms in response to the output signal from the control ...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Providing and fixing kinetic AIR VALVE of PN 16.0 for automatic discharge of accumulate air during working condition, conforming to IS 14845 / EN 1074-4. Body and bonnet of DI conforming to IS-1865 of...
Analogue Addressable 1 to 4 loop Fire Alarm Control Panel expandable via plug-in loop driver boards, loop current 500mA maximum per loop, dual flash based microprocessor, supports to connect 240 addre...
Supply and installation of 9kg Fire Extinguisher Mono Ammonium Phos phate Powder 90, Stored Pressure Type, Pressure Gauge, Gross Weight 14.9 Kg, empty weight 5.90 Kg, Can Height 615MM, Diameter 175M M...
Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MM Diam...
Supply and installation of 9 Ltr Water type Fire Extinugisher, Stored Pressure Type, Pressur Gauge, Gross Weight 15.1kg. empty weight 6.1kg Can Height 615MM, Diameter 175 MM, Discharge Time less than ...
Supplying of four bucket stand alongwith buckets. Complete.SRP- Vol-VI (93/15.111)
Supplying of first aid box. Complete.SRP- Vol-VI (93/15.114)
Supplying of FIRST AID CHART with lamination. Complete.SRP- Vol-VI (93/15.116)
Providings Escape Singage Photoluminescent rigid plastic, 2 mm thickness,Printed on High Quality glass paint with UV resistance, 5 years warranty,Material Used - Non Radiocactive, non-phosphorous, non...
Supply, installation in position, testing and commissioning of RF expander wireless device, two orthogonal antennas for safe radio communications, operating at frequency range of 865 MHz, 7 bi-directi...
Supply and installing testing and commissioning of CI inch Y inch stainer confirming to IS standard with necessary bolts and nuts complete includes cost of all materials labour charges with all lead l...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and fixing DI/CI puddle flanges conforming to IS 7181-1986 with latest ammendments., in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc....
Sinking borewell of 150mm dia. clear, using super fast hydraulic rig of capacity 250 PSIG & above 900 CMF and above, in all strata of earth,including over burden upto 20M, fixing ofcasing pipes, colla...
Borewell depth of 50 to 100 m
Borewell depth of 100 to 150 m
Supplying PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...
Gescom sr/SSM 11KV/198/32.02. 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and res...
Gescom sr/11KV Labour/175/21.05. Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm
Vol I/1.6.1.Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical pecifications, including setting out, shoring, strutting, barricading, cau...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.5 (2019-20 SR)10sqmm.
Vol V/10.1.3.Providing PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect lin...
Fabrication, Supplying, Erection, Testing and Commissioning of 16 Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) ...
VOL-1/2.2.1.Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as ...
VOL-1/2.1.4.Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and ...
VOL-2/11.33.Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work ready to use inchcut and bendinch rebars of approved make from facto...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Fixing LED floodlight fitting over existing pole including clamps, bolts, nuts and wiring using suitable capacity wires complete.(13.5)
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.5.47
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 5.13.1
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
12.56.Earthing. Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion...
SRP.1.2.2. Concealed Conduit System Supplying heavy gauge PVC conduit pipe 25 mm dia 2 .mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and runn...
SRP. 1.3.2 .Supplying heavy gauge PVC Conduit Pipe ….dia .......mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or ...
1.1.2. Open Conduit System.Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inver...
SRP.2.3.Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with spec...
Do- 2.5 sqmm (P6/2.3.3)
Do- 4sqmm (P6/2.3.4)
Do- 6sqmm (P6/2.3.5)
Do- 10sqmm (P6/2.3.6)
Do- 16sqmm(P6/2.3.7)
SRP.2.2.1.Point wiring using Copper wire without switch.Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm ...
Do- Medium point above 3 Mtr upto 6Mtr from tapping point to outlet via switch box. (P5/2.2.2)
Do- Long point above 6 Mtr upto 10Mtr from tapping point to outlet via switch box. (P5/2.2.3)
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall.1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Do- 6 Module (P16/3.5.4)
Do-10-12 Module (P16/3.5.6)
Do-18 Module (P16/3.5.8)
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch 3.6.1
Do- 6Amps 3 way socket (P16/3.6.3)
Do- modular stepped fan regulator (P16/3.6.4)
Do- 16Amps one way switch (P16/3.6.7)
Do- 6/16 Amps universal socket (P16/3.6.10)
Supplying and fixing Fan box with round hook (P3/1.13)
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF...
Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70percentage lumen maintenance with CRI morethan 80. Power Input. 220...
11.8.4 Supply of LED Streetlight luminaire 90 watt with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injectio...
6.3.1..Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with dou...
6.2.1.Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12 Sweep (300mm) 7.2.1
Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires,...
Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL stree...
6.5.1.Supplying wall mounting fan suitable to operate at singlephase 230v A.C. supply.
Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 amps. Ceiling rose, necessary ...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
Do- 6-32 Amps TPN. (5.18.7)
Do- 50-63Amps TPN . (5.18.9)
11.2.1.Supplying & fixing retrofit type -PL- LED Lamp .......W LED linear source with CCT 6500 degree K, CRImorethan 70percentage. efficacy morethan80 lumen per watt, lifemorethan 25000 burning hours ...
12.2.3.Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote.
8.1.Supplying and drawing UTP-CAT 6E LAN cable.
8.4.6.Supplying & Fixing of switch mounting rack with power manager & Cable manager.24U with 650mm depth
8.9.10.Supplying fixing of Network Switches 24 port 10/100/1000 Switch
8.10.1.Supplying & fixing of I/O socket with back box
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...
PWD SR/Vol-5/13.11.5.Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per spe...
PWD SR/Vol-5/12.28.Labour charges for Erection of new / repaired submersible pump set along with GI pipes (32mm / 50mm), cable (New submersible pump set if required will be supplied by the d...
2.6.2.Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conduct...
5.1.Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and moving contacts and bimetallic ...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
5.29.Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.
Supplying, fixing and wiring 50/5Amps to 400/5 Amps 5VA burden current transformer. 0.5 accuracy. (5.34)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC 50Hz 12/24v DC (5.38)
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40...
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit sho...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed ...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 12.58.1
Ges SR/11KV Material/134/18.01.LT Distribution Box for 100 kVA DTC with MCCBs (Sheet Metal) (Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018) (add 10 percentage over head charges and 10 percentage contract...
Gescom sr/11KV materials/207/32.11. 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness a...
Gescom sr/11KV Labour/176/21.06. Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 to 95 Sqmm(add ...
Vol I/1.14.1.Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR)
Do- 10sqmm.(6.17.5)
Do- 50 sqmm Long Barrel. (6.17.9)
Vol V/10.1.8.Providing PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect lin...
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH, KVAR suitable for 3 phase, 4 wire LT network with ...
5.39.Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, ...
VOl-6/KPTCL/P.No-158.Jelly Spreading (20-25 mm) . Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and p...
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor.5.37
Gescom sr/11KV materials/536/66.04.HDPE/PLB Pipe 50/42 mm (add 10 percentage over head charges and 10 percentage contractors profit in Basic rate)
5.14.2.Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.3...
5.16.Supplying and fixing of Shunt trip suitable for MCCB.CBCT.
Gescom SR/SSM 11KV/88/12.04.Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1). 2014 63 kVA, Aluminum Wdg, Star 2 (5 Star) (add 10 pe...
Gescom SR/11KV Labour/72/8.02. Erection of 25 to 63 kVA Transformer on Transformer Structure
Gescom SR/SSM 11KV/289/41.01. Load Break Switch with Panel
Gescom SR/SSM 11KV/1/1.01.RCC Pole - 9 Mtr Long, 145 Kg WL
Gescom SR/11KV Labour/30/2.02.Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth
Gescom SR/SSM 11KV/11/2.01.11 kV, Horizontal Cross Arm - Mild Steel (MS)(Dwg No. BESCOM/GM/QS&S/04 Dtd 24.11.2018)
Gescom SR/11KV Labour/51/5.03.Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing
Gescom SR/SSM 11KV/47/6.01.11 kV Ceramic Pin Insulator (Shell only)
Gescom SR/SSM 11KV/55/6.09.DISC Insulator 45 kN Porcelain
Gescom SR/SSM 11KV/166/24.01.11 kV, 200 Amps Single Break GOS (Dwg No. BESCOM/GM/QS&S/23 Dtd 24.11.2018)
Gescom SR/11KV Labour/97/13.02.Fixing of GOS including wiring (11 kV Single Break 200 Amps)
Gescom SR/SSM 11KV/39/5.09, 5.11, 5.12, 5.13, 5.14, 5.16. Guy Clamp - MS (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)Turn Buckle (GI) (Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018)Anchor Rod using 12 mm ...
Gescom SR/11KV Labour/58/5.10.Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Exclu...
Gescom SR/SSM 11KV/137/19.01. 9 kV, 5 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR (Dwg No. BESCOM/GM/QS&S/26 Dtd 24.10.2007)
Gescom SR/11KV Labour/101/13.06.Fixing of 3 Nos Lightning Arrestor including wiring
Gescom SR/SSM 11KV/139/20.01.11 kV, HG Fuse Unit with Solid Core Insulator (Dwg No. BESCOM/GM/QS&S/21 Dtd 24.11.2018)
Gescom SR/11KV Labour/96/13.01.Fixing DOLO Cutout/Horn Gap Fuse including fixing of cross arm and wiring
Gescom SR/SSM 11KV/59/7.02.Rabbit ACSR (6/3.35 mm Al + 1/3.35 mm St), Std Wt. 214 Kg/KM
15.111.Supplying of four bucket stand alongwith buckets. Complete
15.117.Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick.complete including cost of materials, labour, usage charges of machinery complete as per specifications.
15.113.Supplying of Hand gloves. Complete
15.114.Supplying of first aid box. Complete
15.116.Supplying of FIRST AID CHART with lamination. Complete
Ges SR/SSM 11KV/593/68.17.Caution/Danger Board
21-22/Vol-4/Part-B/Lift Irrigation/4.41.Providing and fixing chain link fencing consisting of 3 m long 65 x 65 x 6 mm M.S angles with top 50 cm bent at 30 degree to vertical fixed at 2.5 m intervals i...
5.20.2.Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board.
Do- 63 Amps 4 pole (5.20.3)
5.12.4.Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories. (SM Enclosure Sheet Metal Execution) 200 A
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MCBs single phase / ...
Do- 8way SP &N.(5.19.8) Double door.
Do- 12way SP &N. (5.19.9) Double door.
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...
5.29.Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.
Supplying, fixing and wiring 50/5Amps to 400/5 Amps 5VA burden current transformer. 0.5 accuracy. (5.34)
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v AC 50Hz 12/24v DC (5.38)
PWD SR/Vol-2/11.16.1.Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying ...
12.56.Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit...
12.57.Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer ...
Gescom SR/SSM 11KV/61/8.02.8 SWG GI Wire (4.064 mm Dia), Std Wt. 131 Kg/KM
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm GI strip 12.58.1
Vol I/1.14.1.Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.1 (2019-20 SR)
Do- 10sqmm.(6.17.5)
Do- 50 sqmm Long Barrel. (6.17.9)
Vol V/191/16.9.onstructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1.6, bed concrete 150mm thick with ...
Vol V/10.1.8.Providing PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect lin...
Vol II/09/5.4.(Size stone masonry) Construction of Platform with size stone, cement concrete for errection of Transformer/Metering Cubicle /Heavy equipment. Construction of platform (1.5m x 1.5m x 1.2...
Gescom SR/SSM 11KV/398/53.04.LT AC 3 Phase 4 Wire, 5-30 Amps DLMS Complaint Energy Meter, 1.0 Accuracy Class (Used for LT-2, LT-3 & LT-5 Installations up to 25HP/18KW)
Gescom sr/SSM 11KV/198/32.02. 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and res...
Gescom sr/11KV Labour/175/21.05. Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm
Vol I/1.14.1.Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricadin...
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.6.17.5 (2019-20 SR)10sqmm.
Vol V/10.1.8.Providing PVC ringtite pipes conforming to IS 4985.2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect lin...
Fabrication, Supplying, Erection, Testing and Commissioning of 16 Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) ...
VOL-1/2.2.1.Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as ...
VOL-1/2.1.4.Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and ...
VOL-1/2.11/A(P No-18).Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from fac...
Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Fixing LED floodlight fitting over existing pole including clamps, bolts, nuts and wiring using suitable capacity wires complete.(13.5)
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.5.47
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 5.13.1
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and C Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...
12.56.Earthing. Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
annexure_b 26-27.doc
Others - Annuxure B • 0.04 MB
annexure_a 26-27.doc
Others - Annaxure A • 0.03 MB
Notification No 08-2026-27 PM eBus Vijayapur.doc
Others - Tender Notification. • 0.11 MB
kw-4 above 100 lakhs final print.doc
Others - KW4 • 0.21 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .