SPL REPAIR TO BLDG NO. T-16 AT MILITARY HOSPITAL FATEHGARH CANTT

Amount

Demolition of reinforced cement concrete in any description and in any position complete all as specified and directed.

Demolition cement concrete in any description and in any position complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping & benching complete all as specified and directed.

M & L mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 100mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type prelaminated both side flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type prelaminated both side flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S&F Factory made solid panel PVC wiremesh door shutter 30 mm thick (style) wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree) used instead of exposed portion of PVC sheet beading ,wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmlyconsisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F factory made Steel Window 1.25mm thick Box Type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Hold Fast, 150mm long of 12mm square bar made to shape – 04 Nos per window (b) Handles of Z Sec 100mm long (c) Stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges – 01 No per leaf (e) MS Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Fabrication & fixing arrangement as per TD complete all as specified and directed. Note : Glass, and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F factory made Steel Window 1.25mm thick Box Type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf without sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame and 100mm spacing of guard bar complete all as specified and shown on drawings. Note: Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S&F for Steel ventilators , fixed type, complete with glazing bars/gauzed portion dovetailed or welded etc complete all as specified and directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty including glazing clips in square not exc 0.50 sqm in each pane complete all as specified and directed.

S & F in Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, welded tinned tacks,rivets,wooden beads etc. to steel windows/wodden doors/windows complete all as specified and directed.

S & F MS work as in window guard bars, angle, flat iron, let in and fixed independently, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded section of 150mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 150mm etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S&F 300 mm long ordinary mild steel helical door spring , fixed to doors with screws complete all as specified and directed.

M&L Preparing new surfaces of steel and applying two coats of synthetic enamel paint over a coad of red oxide complete all as specified and as directed.

M&L Preparing new surfaces of steel and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparing old painted surfaces of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

Taking down cement plaster on brick wall or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc and disposed off unserviceable material of out side MD land complete all as specified and directed.

M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork masonary built in lime or cement mortar including all quiens arches, pillars etc. But including concrete articles complete all as specified and directed.

M & L Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cm (1:6) complete all as specified and directed.

All as per item No.30 above but except Bricks etc complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of oil bond distemper white or any tint over a coat of chalk whitening complete over prepared surface of 2mm thick wall care putty complete as specified and directed. Note The entire work shall be carried out by authorized applicator only.

M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a 1mm thick wall care putty over a coat of alkali resistant primer complete all as specified and as directed.

M & L for preparation of old plastered surfaces of walls by complete removal of existing treatment and making surface smooth and applying two coats of OBD over a 1mm thick wall care putty over a coat of chalk whitening complete all as specified and directed.

M & L for preparation of old plastered surfaces of walls by complete removal of existing treatment and making surface smooth and applying two coats of Cement based paint over a 1mm thick wall care putty over a coat of alkali resistant primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement (1:6) complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square / rectangular) polished, area of each tiles exceeding 0.18 sqm and not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement INCLUDING Screed bed or bedding layer of 1:6 mortar 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 450X 350X 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick rendering in CM (1:3) on brick work concrete surface on wall and finished the even and fair to receive tiles complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 15 mm th screed in CM 1:6 complete all as specified and directed.

M & L for providing prepolished chequered cement concrete tiles of size 20cm x 20cm x 25mm thick set & jointed in neat cement slurry with grey cement and pigment including 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying of chequered tile complete complete all as specified and directed.

M & L 50 mm thick PCC 1:3:6 type C-2 using 40mm graded aggregateds as in plinth protection, subbase of floors complete all as specified and directed.

M & L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded aggregates as in subbase complete all as specified and directed

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheetiting in roof covering complete all as specified and directed by Engineer-in-Charge.

S & F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa (not less than AZ 150) as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for Hand rails, half round or other steel section or core for rafters, purlins, flat iron, angles, channel drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for Providing precast cement concrete Type B1 1:2:4 ( 20mm graded aggregate ) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face complete all as specified and directed

Dismantling water tanks exc 500 &n exc 1000 litres complete all as specified and directed.

S & F 1000 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I incl 20mm float valve complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid 6mm dia GI (upto 1200 mm length) adjusting level fixed to Roof Truss / RCC Slab all as per manufactured instruction.

S&F in repair Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling complete all as specified and directed

S&F in repair Vitreous China Wash down water closet pedestal patteren white with platic seat cover including Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook complete all as specified and as directed .

S&F in repair Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity white, with inlet, ball float and handle including brackets complete all as specified and directed.

Taking up or down Steel Tubing bore of pipe in 15mm and connections, and removal to store etc complete all as specified and directed.

All as per item No.57 above but of 20mm bore complete all as specified and directed.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

All as per item 59 above but of size of 20mm bore complete all as specified and directed.

M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia pipe complete all as specified and as directed.

S&F in repair 15 mm bore , Angle Stop valves, concealed cock, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated with long shank and cup(concealed type) complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed.

S&F in repairs Brass CP mixer for mixing hot & cold water as in for basin mixer and fixed complete all as specified and directed.

S&F in repairs wall mixer with L-band(provision of overhead shower) 15mm bore brass chromium plate foam flow for mixing hot and cold water fancy type complete all as specified and directed.

S & F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair PTMT grating doom 100mm dia with or without waste hole etc complete all as specified and directed.

Dismantling of cast iron, AC drain pipes alongwith fittings and accessories upto 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor 110 mm bore pipe with clamps complete all as specified and directed.

Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

Taking down Aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.

(a) One light/ holder/fan/exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket combination point on an independent board.

(c) One 5 pin 5 Amp socket point controlled by one switch on same board.

All as per item 75 here in before but for one 16 Amp 6 Pin switch socket combination independent with 4.0 Sqmm FRLS unsheathed copper conductor single core multistranded complete all as specified and directed.

S&F modular switch 1 way 6A, 1 module complete all as specified and directed

S&F Modular switch socket combination outlet 3 pin, 5 Amp flush type independent complete including frame all as specified and directed.

S&F Modular socket 6A, 2/3 pin combined 2 Module on same board complete all as specified and directed.

S&F Modular switch socket combination 16A, 6 pin, 3 module complete including frame all as specified and directed.

S&F modular electronic fan step regulator, 120 W, 2 module complete all as specified and directed.

M&L for Lamp Holder PVC/Polycarbonate type insulated body with back plate angle type for batten fittings incl LED Lamp of 12 Watt & colour temp 6500K suitable for fix in angle holder complete all as specified and directed.

Supply and fixing of VTPN DB suitable for Mounting MCCB as Incomer of rating 100 Amp Vertical distribution board 4 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including MCCB 100 Amp, 16 KA, 3 pole complete electrial connection with aluminium thimbles as required complete all as specified and directed.

Supply and fixing of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified

S&F of MCB SPN 63 Amp 240 volt 'C' curve complete all as specifed and directed.

S&F MCB in replacement of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

Supply and fxing LED batten 4 Ft surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (4 FT 20 W), luminaire lumen >2000 Im, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20. colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9,| THD <20% as per IEC 61000-3-2, colour temp -650OK, surge protection 2.5 KV, 50000 burning hrs (mnin) as per L70 criteria, two stages isolated constant current operated driver with range 150- 270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification completed all as specified and directed.

Supply and fxing LED batten 2 Ft surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 FT 10 W), luminaire lumen >1000 Im, system efficiency of >100 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20. colour rendering index CRI>80, temp range 0 to 45ºC, driver efficency>85%, power factor>0.9, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50000 burning hrs (mnin) as per L70 criteria, two stages isolated constant current operated driver with range 150- 270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification and connecting the same in electric source with and using PVC sheathed and insulated 3 core copper conductor cable of size 0.75 sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.)

S&F of metal plug & socket DB with metal plug and MCBs double pole and neutral enclosere with a two pin earth plug and socket suitable for 20 Amp complete with one single pole MCB complete all as specified and directed.

S & F building security LED Light 20 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 40 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 40x6 mm for fixing of builiding security light fittings completed all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, burried directly into the ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel all as shown in electrical plate No - 3 connected to earthing test point all as specified or indicated including excavation and connected earth work, PCC chamber and cover, watering pipe, funnel wire mesh but without earth lead protection pipe and test on completion after dismantling unserviceable erthing (above GL only) complete all as directed incl dismantling of exsisting earthing. ( Note :- On testing after completion if desired earth resistence is not obtained, the earthing will be redone at no extra cost.)

M/S S P CONSTRUCTION

M/S WASEEM KHAN CONTRACTOR

MS. BK BROTHERS AND CO

m/s udit constructions