ELECTRIFICATION WORK DUE TO NATURAL DESESTER PRONE AREAS BY INVITING RUNNING TENDER IN THE AREA OF EDD III BULANDSHAHR UNDER EDC III BULANDSHAHR

Amount

fo|qr forj.k [k.M&r`rh;] cqyUn'kgj ds vUrxZr jfuax fufonk ds ek/;e ls lEHkkfor nSoh; vkink] oh0vkbZ0ih0 ds vkxeu dk;ZØe ij vkdfLed ejEer] vkdfLed okgu nq?kZVukvksa ds dkj.k ih0lh0lh0 iksy] Økl vkeZ ,l0Vh0ih0 iksy ,oa ykbZu bR;kfn {kfrxzLr gksus ij iquZLFkkfir@ejEer djus dk dk;ZA

Carriage of fallowings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

PCC Pole ESC Bulandshahr to site .

Carriage of All line Material from store to j.e store Sub-station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. Earth wire, M.S. Channel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection of Single support including complete H.T./L.T. fittings as per RESPO Drawing and as per direction of Engineer incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of Cement, Sand, Brick Ballast/Stone Ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Carriage of line Material from J.E store to Site as ACSR Weasel Conductor, ABC Conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Dismantling of 25 KVA/63 KVA Insulator from damaged double pole.

Dismantling of 100 KVA Transformer from damaged double pole.

Mounting of 25 KVA/63KVA Transformer or double pole.

Mounting of 100 KVA T/F on doble pole.

Laying, sagging. Stringing and binding and jumpering etc. of following Conductor on the newly erected poles as per RESPO manual and as per direction of Supervising Engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

fixing of Stay rod with Stay wire in proper way with Nozelling

Grouting of Stay rods

Re-sagging of loose and bad sag of L.T./H.T. Line.

Tightening of Stay

Grouting of PCC/STP Pole old.

Change of following broken/Damaged/Missing items of ht/lt lines

Disc Insulator.

Pin Insulator.

Bolt & nut off size.

Bended X-Arm/Angle/Channel.

Ailgnment of tilted PCC/STP Pole.

F clamp.

Stay Clamps.

Stay Insulator.

Making of pilinth of the Damaged/Broken STP of the welded 03 nos. Angle iron piece with the pole.

Dismantling of STP/PCC Poles.

The following material is required to the following material is required to be supplied by the contractor.

Stay Clamps.

Stay Insulator.

F Bracket.

X-Arm Holding Clamp.

F clamp.

Earth clamp

Stay clamp

Bolt & nut off size.

Carriage of followings from ESC BSR to pit site on kachcha pacaa road including loading and unloading chagres at both ends, required ccompletion of work, distance about to 0 to 70 Km. approx.

Carriage of 33 KV PCC Pole /STP pole

Carriage of All line Material from store to j.e store Sub-station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. Earth wire, M.S. Channel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection of Single support including complete H.T./L.T. fittings as per RESPO Drawing and as per direction of Engineer incharge including the cost of labour, T&P and carrier etc. required for proper completion of work. Installation of Single support 33 kv pole including fixing of fittings.

Grouting of 33 kv Stays Rods

Straightning of 33 kv tilted Poles.

Replacement of Damaged X Arms of 33 kv

Replacement of Damaged Disc Insulators.

Replacement of Damaged of Pin Insulators.

Vivek Electricals