Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹94.8 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹100.0 L+₹5.1 L (5.42%)Rejected-AOC | L2 | Rejected-AOC L2 |
Tender Value
₹95.1 L
EMD Value
₹1.9 L
Closing Date
17 Dec 2022, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer-I(Bldg)PWD,WD,DNH,Silvassa
PWD Campus block No.I(B),DNH, Silvassa
Additional Work for Auditorium Building at Dr.APJ Abdul Kalam College Campus, Dokmardi, DNH.(2nd Call)
2022_UTDNH_6235_1
E-TENDER NOTICE NO.37 OF 2022-23 (Bldg)
Open Tender
Civil Works - Buildings
Item Rate
90 days
UT OF DNH
As per NIT refer
3 documents required · 3 mandatory
₹1,000
Executive Engineer-I(Bldg)PWD,WD,DNH,Silvassa
₹1.9 L
20 Dec 2022
8 Dec 2022
17 Dec 2022
8 Dec 2022
17 Dec 2022
8 Dec 2022
Amount
PAINTING & FINISHING (EXTERNAL): Providing Material and labour for Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc all complete as per the direction and as approved by the competent authority.
P/f single 38 mm thick PLY flush door of overall size of 900mm x 2100 mm finished with Veneer Front & Back side laminate and with 10mm thick clear float glass to be fixed with teak wood beading of size 19mm x 12mm. The beading to be polished matching the laminate shade. Rate to include cost of OZONE 5" door hinges, mortise lock (rose type), auto door closer, door stopper and all required hardware complete as directed. (As directed by Engineer in charge)
P/f single 38 mm thick PLY flush door of overall size of 900mm x 2100 mm finished with laminate. The beading to be polished matching the laminate shade. Rate to include cost of OZONE 5" door hinges, mortise lock (rose type), auto door closer, door stopper and all required hardware complete as directed. (As directed by Engineer in charge)
Providing material & fixing for GRC Jali with back support with MS Pipe frame work
Providing material and fixing18gauge 50mmx25mm louver patta aluminium tube with 8mm thick bison board.
Ralph 3 Seater SOFA of size: 2000(W)x860(D)x900(H) Sofa cover made up of Leatherite with stylish wooden legs with single seat dimesssions 940(w)x860(d)x900(h) and 3 seater overall dimesions 2000(w)x860(d)x900(h) Plywood armrest foam density-18 Plyester Backrest: Foam desnity-15 and Polyrster seat: Foam density -25 with wooden legs having proper polish on it.
Ralph 3 Seater SOFA of size: 2000(W)x860(D)x900(H) Sofa cover made up of fabric with stylish wooden legs with single seat dimesssions 940(w)x860(d)x900(h) and 3 seater overall dimesions 2000(w)x860(d)x900(h) Plywood armrest foam density-18 Plyester Backrest: Foam desnity-15 and Polyrster seat: Foam density -25 with wooden legs having proper polish on it.
Golf 2 Seater SOFA of size: 1550(W)x870(D)x760(H) with inner solid frame structure made of high quality wood. Backrest:2" elastic webbing(250gm) with diagonal weave and 3" foam(23D) with polyester polyfill outer layer(180gsm). Foam:18D PU Foam Upholstery: Semi PU with layer of polyester polywadding. Seat:foam density-25+ rebond foam, with webbing belt & Polyeste. Colour: Brown
Ralph 1 Seater SOFA of size: 940(W)x860(D)x900(H) Sofa cover made up of fabric with stylish wooden legs Plywood armrest foam density-18 Plyester Backrest: Foam desnity-15 and Polyrster seat: Foam density -25 with wooden legs having proper polish on it.
Providing materail for Traditional Carpet (Orange Brown, Wool and Wool Blend), Size: 1.20x1.80
Providing material & laying 16pass UV Print on special wall paper textured media Painting with approved design.
Providing & laying Rustic Textures as approved by Engineer in charge.
Providing Material and labour for filling in foundation and plinth with Rubble under floors and consolidating deposited layers by ramming watering etc. Complete. (RA)
Providing and fixing steel bars of the bar 16mm diameter as making a hole through mechanical drilling, cleaning of hole by pressure jetting and fixing in hole with using expoxy grout.
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls. ()
Providing and fixing PVC SWR pipes IS 13592 for Drain - 75 mmdia.
Providing and fixing PVC SWR pipes IS 13592 for Drain - 110 mmdia.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm.
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [A] 15 mm.
Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (upto 10 ton)
Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement. (upto 10 ton)
Providing and fixing 15mm dia Sink Cock with swining spout. Make : Blues
Providing and fixing 15mm dia Angle cock with wall flange, Make: Cera Victor F1015201
Providing and fixing 15mm dia Concead StopCock Make: Cera (F4050102+F1014351)
Providing and fixing Flush Tank Make: Cera
Providing and fixing 15mm dia Angle cock with wall flance Aroma Make:Blues
Providing and fixing Seat Cover. Make: Cera
Providing & fixing 15mm dia 2 in1 Bib cock granet Make : Cera (F2002161)
Providing & fixing Swan Neck with Spout Aroma : Make : Blues
Providing and fixing EWC Wall Hung P, Flushing efficiency 3.81/2.48 LPF, Water saving 36% make: CERA Carnival Rimless S 1043144
Providing and fixing 550x400mm Wash Basin Cornet Basin with full padestal Make: CERA (S2040103) (S2090101)
Providing and fixing 360 x 330 x 740 mm Urinal Calcia EFS Sensor Make: CERA (S4010101)
Providing and fixing 500 x 90 x 460 mm Chevron Concealed cistern (without knob & frame) Make: CERA (B1110101)
Providing and fixing 15mm dia Angle cock Make: CERA
Providing and fixing Pillar Cock-Fus Make: Jaquar 29001
Providing & fixing 2 way bib cock with wall fkange: Make : CERA
Providing & fixing Health Faucet Health faucet ABS body with wall hook and 1 metre chrome plated PVC hose pipe : Make : CERA (F8030103)
Providing and fixing toilet paper holder. Make: Hindware 8800089
Providing and fixing toilet Soap Dispensar with glass Bottle. Make: Jaquar (35735)
Providing and fixing Towel Ring Square. Make: Jaquar (35721p)
Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size
Polishing on SS Railing work with ready made polish.
Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete
Core Cutting work in RCC Wall with 7" Dia & 17" depth.
Core Cutting work in Brick Wall with 5" Dia & 9" depth.
Core Cutting work in RCC Wall with 10" Dia & 11" depth.
Core Cutting work in RCC Slab with 5" Dia & 17" depth.
Providing and laying machine cut, mirror polished Marble stone flooring,in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. a. 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.
Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. Work.
Providing and laying controlled cement concrete M.250 and curing complete exposed work with curing etc. complete including the cost of form work but excluding the cost of reinforcement work in COLUMNS UPTO FLOOR TWO LEVEL having cross sectional area 0.08 to 0.12 sq.mt
Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional (upto 10 ton)
Providing and laying controlled cement concrete M.250 and curing complete exposed work with curing etc. complete including the cost of form work but excluding the cost of reinforcement work in Slab upto floor two level. (upto 10 ton)
Providing and laying controlled cement concrete M.250 and curing complete exposed work with curing etc. complete including the cost of form work but excluding the cost of reinforcement work in BEAMS having cross sectional area 0.12 to 0.18 sq.mt. UPTO FLOOR TWO LEVEL
Providing 20mm thick cement plaster in single coat on single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)
Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level (upto 10 ton)
PAINTING & FINISHING (INTERNAL): Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth and Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth complete with all accessories and fitting and as per the design/drawings and as per the direction and as approved by the competent authority.
Providing & laying two coats of cement based, non toxic acrylic emulsion polymer based elastomeric having strong adhesion to sbustrate with 100% elongation at tensile force of 50kg/sq.cm and having water resistance upto 7 bar water pressure 1mm DFT. Second and final layer of two coats ready mix cement based polymer enriched high performance surface finishing material incorporated with high qusality polymer additives, graded sand and fillers for thin bed/coat application. Note: surface should be thoroughly cleaned with high water pressure before application complete with all materials and labour (make ultratech, asian, Dr. fixit)
Point wiring for Light/ Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earthwire of 1.5 sq. mm (green) both are of ISI marked 1.1kV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ flushed on wall /ceiling, complete with 6A Tissino type ISI marked flush type switch/ bell push and accessories erected on Metal/ PVC Box covered with 3 mm thick PC (Polycarbonet)/ Acrylic sheet with necessary Lamp holder/ ceiling rose/ H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories
Point wiring for independent PLUG with following size mains & earthwire of 1.5 sq.mm (green) both are of ISI marked 1.1kV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in /flushed on wall/ ceiling, complete with ISI marked 3/5 Pin socket and tissino type switch erected with earth continuity connection erected on Metal/ PVC box covered with 3 mm thick PC (Polycarbonet)/ Acrylic sheet.(B) 6/16A Plug with 2-2.5 sq. mm Cu. Mains (a) with medium class Rigid PVC pipe and accessories
Mains with 1.1kV grade FRLS PVC insulated ISI marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ ceiling with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size.(A) with medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm
Mains with 1.1kV grade FRLS PVC insulated ISI marked stranded copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ ceiling with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size.(A) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm
Mains with 1.1kV grade FRLS PVC insulated ISI marked stranded copper conductor wire in following type of pipe to be erected in/ on wall /ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm
Mains with 1.1kV grade FRLS PVC insulated ISI marked stranded copper conductor wire in following type of pipe to be erected in/ on wall /ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 6 sq. mm
Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. Make- Bluestar
Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee.[C] 50 Ltr / Hr with 250 psi 2 nos booster pump.
Providing and erecting 3 star and above rated approved make split air-conditioning unit consisting of condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of proper insulated copper tubing up to 5 RMT suitable for (Cost in+B59udes M.S. Stand, Gas Charging & Internal Copper Wiring & Remote Control) (A) for 1.5 ton capacity
Supply, Installation, testing and commissioning of Variable refrigerant volume system with Modular outdoor units having inverter driven multi scroll compressors (minimum two compressors) with one capacity controlling compressor and other constant speed type compressor working on R-410 A refrigerant, special pre- coated fins, panel, corrosion resistant (suitable for seaside installation) coated condenser, DC inverter based condenser fan M.S. hot dip galvanised stands / supports, electrical & microprocessor panel, isolating valves and all the necessary accessories for proper functioning of the units, having following capacities.Ceiling Mounted Four Way Cassette Type 2.00TR.
Supply, Installation,Testing & Commissioning of Stage Control Electrical Panel: following functions are required to be achieved with the panel. 1. To operate the Gong. 2. To raise or lower the General (Dimmer) Hall Light. 3. To Turn ON or Off the Seat Row Light. 4. To turn On or Off the Working Stage Light. 5. To turn On or Off the Instant Light in Hall. 6. To Open or Close the Main Curtian. 7. To open or Close the Mid Curtian/Cyclorama Curtain.
Supply, Installation,Testing & Commissioning of Audio Rack 9U for Spliter: Compatible for both DMX-521, I U rack Mount housing design, Signal Line Out or Terminate push button, CE/ETL/cETL and FCC marked.
Supply, laying, testing & commissioning of DMX Cable
Supply, laying, testing & commissioning of 1.5Sqmm 7Core flaxibale cable
Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (a) 4 core 4 Sq. Mm
Supply, laying, testing & commissioning of 1.5Sqmm 12Core flaxibale cable
Supply, laying, testing & commissioning of Projector Bracket for Projector.
Supply, laying, testing & commissioning of HDMI Cable 5MTR
Supply, laying, testing & commissioning of HDMI Cable 1.8MTR
Supply, laying, testing & commissioning of VGA Cable 5MTR
Supply, laying, testing & commissioning of Speakon Connector
Supply, laying, testing & commissioning of XLR M/F Connector
Supplying frost free domestic type double door approved make refrigerator having minimum 3 star rating with 285 Ltr to 330 Ltr storage capacity operating on single phase power supply & surge/spike suppressor having 3 out lets of 1.8 AMP each complete erected.
Supply, laying, testing & commissioning of 3M Foot Light Black Myline Make - Legrand
Supply, laying, testing & commissioning of DB 16 WAY ETPN D/DOOR Make: Lagrand
Supply, laying, testing & commissioning of LED Astral 2W 3K White Fin
Supply, laying, testing & commissioning of Wall Light 6 watt
Supply, laying, testing & commissioning of LED ADORE 2.8W B22 WW BALL LAMP
Supply, laying, testing & commissioning of 6 Light Brown Body Morden LED Chandelier Ring for Office Hanging Suspension Lamp Warm White
Supply, laying, testing & commissioning of Ceramic Pot Base Table Lamp with shade- Golden
Supply, laying, testing & commissioning of Crysta COB Swivel fitting 18 Watt
Supply, laying, testing & commissioning of Innova Neo LED Sport Light 3 W 3k RD
Supply and Fixing of LED Crysta COB Swivel wall washer 20W 3K
Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c)63 Amp. Cat-III.
Mains with ISI marked, 1.5kV grade electrolyte multi stranded, annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC-227 erected in existing pipe of following size (Specifically for control panel, relays, power switchgears, motor starters & control wiring) with required size of copper lugs, nuts and bolts if required.(e) One wire 6.00 sq. mm
Supply and fixing 10MM Connector
Supply and fixing DB 160A Encloser 3P+ 4P
Supply, laying, testing & commissioning of 8 Port Switch for Amplifier
Supply, laying, testing & commissioning of DVD Plyer
Grills and diffusers Supply and fixing of grills & diffusers a) Extruded Aluminium powder coated supply air / Return Grill for Ductable Air Conditioners.
Acoustic lining of duct. Supplying and fixing of 25 mm thick acoustic lining of duct OF 48KG/M3 DENSITY covered with tissue papers and Alu. Perforated sheet for Ductable Air Conditioners.
Supply, laying, testing & commissioning of POE Switch 16 Port TVT Series
Supply, laying, testing & commissioning of Controller PCB for IDU Make: Blue Star
Supply, laying, testing & commissioning of Central Controlle for Operation Make: Blue Star
Supply, laying, testing & commissioning of Communication cable 2 Core 0.75 Sqmm Sealed.
Supply, Installation,Testing & Commissioning of INCOMER:250A MCCB 3P DN-2 36KA DN-2 EXTENDED ROTARY HANDLE DN2-SPEADER LINH(1 No.), OUTGOING: 40A FP MCB 10 KA (5 Nos.) POWER & CONTROL WIRING, BUSBARS, CONTROL PANEL BOARD,ETC Size[LxDxH] in mm i.e.800X600X250, Electrical Control Panel Board will be of Low Tension, Indoor type, Floor Mounting, Dust and The Busbars will be of Electrolytic Grade Aluminium suitable for 3 Phase 4 wire supply,It will be designed for Front / rear access and it is made out of 14/ 16MM. GI Sheets, It will be Pretreated and Powder Coated with Siemens Grey Shade RAL 7032.
Supply, Installation,Testing & Commissioning of INCOMER:400A MCCB 3P DN-2 36KA DN-2 EXTENDED ROTARY HANDLE DN2-SPEADER LINH(1 No.), OUTGOING: 40A FP MCB 10 KA (5 Nos.)POWER & CONTROL WIRING, BUSBARS, CONTROL PANEL BOARD,ETC Size[LxDxH] in mm i.e.1100X1000X300. Electrical Control Panel Board will be of Low Tension, Indoor type, Floor Mounting, Dust and The Busbars will be of Electrolytic Grade Aluminium suitable for 3 Phase 4 wire supply,It will be designed for Front / rear access and it is made out of 14/ 16MM. GI Sheets, It will be Pretreated and Powder Coated with Siemens Grey Shade RAL 7032.
Supply, Installation,Testing & Commissioning of 2000A, 3 &4 Pole, ACB (Draw-out Type) with Thermal Magnetic/ Microprocessor release (O / C, S / C & E / F) having breaking capacity Icu of 50 kA at 415V with 6NO+6NC potential feee auxiliary contacts, secondary isolating contacts with all necessary Electro-Mechanical protections & interlocks etc. ACB Module shall have enclosure dimension: 2000 (H) x 900 (W) x 1100 (D) & following technical features: Enclosure dimension: 2000(H) x 900(W) x 1100 (D), 4 pole, EDO with Microprocessor Release
Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections.(G) Suitable for 1200 Amp. Capacity
Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm.
Shan Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .