Development of Temporary Bus Station at RM Office and DWS Kaushambi Campus upto Re-Development of Kaushambi Bus Station on PPP mode.

Earth work in excavation in all types of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m,

Cement Concrete 1:4:8 (1 cement : 4 coarse sand derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in fdn. & under floor complete. (DSR Item Code 4.1.8)/2023

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation & plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR Item Code 6.1.1/2023)

Providing and laying cement concrete 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, p

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and acces platform. (DSR Item Code 5.9.3)/2023

Steel reinforcement with mild steel and Medium Tensile steel bars for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level complete. (DSR Item Code 5.22.10)/2023

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) (DSR Item Code 13.4.1)/2023

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR Item Code 13.80)/2023

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied@ 2.20 kg/10 sqm). (DSR Item Code 13.47.1)

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources) i/c mixing water proofing material in

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in above plinth level up to floor V in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR Item Code 6.4.1/2023)

Steel work in built up hot finished welded type tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding andbolted with s

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of

Centering and shuttering for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including strutting, propping etc. and removal of form for all heights. (DSR Item Code 5.9.2)/2023

12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand). (DSR Item Code 13.7.1)/2023

Precast chequred tiles 22 mm thick with graded marble chips of size upto 12 mm, laid in floors, and landings, jointed with Light shade pigment using white cement i/c neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. (DSR Item Cod

Centering and shuttering for foundations, footings, bases of columns, etc. for mass concrete.including strutting, propping etc. and removal of form for all heights. (DSR Item Code 5.9.1)/2023

Providing corrugated G.S. sheet 0.63 mm thick with zinc coating not less than 275 gm/ m² roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. lim

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge. (DSR Item Code 15.1)/2023

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (DSR Item Code 15.3)/2023

Providing & laying "brick Coba" 120 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mix

Providing and fixing Polyester powder coated (minimum thickness of polyester powder coating 50 micron)aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wh

Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

Providing and fixing 12 mm thick pre-laminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters a

Providing and laying double charged vitrified floor tiles 600x600 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer. (DSR item Code 13.41.1)/2023

Providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent in flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m

40 mm thick plain Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 with 20 mm nominal size graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. (DSR Item Code 15.12.1)/2023

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, using flats 30x6mm for diagonal braces and central cross piece all necessary fittings complete, including applying

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (DSR Item Code 15.56)/2023

Making the opening for door/ window/ clerestory window in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish

Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necess

Providing and fixing 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well ma

Oxidized iron fitting for door & windows i/c supply of all materials, labour, T&P complete. (AR)

Providing and laying cement concrete 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, p

Half Brick masonary with common burnt clay F.P.S.(Non modular) bricks of class designation 100 in super structure above plinth level in1:4 cement and coarse sand mortar i/c supply of all materials,labour,T&P etc.complete.(DSR 6.13.2)

S/F of 6mm thick China glazed tiles laid with 1:3 cement and coarse sand mortar finished with white cement slurry and i/c jointing and polishing etc.complete.(DSR 11.37A)

P/F angle Tee iron frames for door, windows and ventilators of M.S.angle sections of size 35x35x5 mm , joints mitred and welded by angle iron 35x35x5mm or 35x5mm flat pieces to the existingTee iron frame or to the wall with dash fastener, i/c fixing of n

Providing and fixing 20 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes in concealed work, including cutting chases and making good the walls etc., having thermal stability for hot & cold water supply, including all CPVC plain & brass t

Providing and fixing CP brass Lift/Push cock of approved quality complete. AR

P/Fixing of 20 mm dia cpvc ball/stop cock of app quality complete.

P/Fixing of 20 mm dia cpvc union of app quality complete.

Constructing masonry Chamber 30x30x50 cm inside, with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hin

P/Laying 80 mm dia pvc pipe 6 kgf pressure complete.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base suppor

Providing and fixing 40 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes in external work, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00

Providing and fixing 25 mm nominal dia Pipes Chlorinated Polyvinyl Chloride (CPVC) pipes in external work, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m

P/Fixing of 40 mm dia cpvc ball/stop cock of app quality complete.

P/Fixing of 40 mm dia cpvc union of app quality complete.

P/Fixing of 25 mm dia cpvc ball/stop cock of app quality complete.

P/Fixing of 25 mm dia cpvc union of app quality complete.