PROVN OF CENTRALIZED SOLAR WATER HEATER, PROVN OF EXHAUST FAN AND PROVN OF INTERCONNECTING PIPE LINE UNDER AGE E/M W/S AND AGE E/M E/S OF GE (WEST) JABALPUR

Amount

M & L for fabrication of angle iron frame stand with equal angle of size 40x40x 6 mm suitable for Solar water heater and fixing arrangement complete all as directed by Engr-in-Charge .

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggrregate in coping of poles/foundation for poles, struts, posts etc including necessary form work, finished the exposed surfaces fair and even without using extra cement complete all as specified and directed.

S&F 20mm dia ball valves high pressure PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F Rotational Moulded polyethylene water storage tanks 1000 Ltrs (Cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed by Engr-in-Charge of make : Sintex/Plasto/Polycon)

S&F Gun Metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 20mm bore etc complete all as specified and directed by Engr-in-Charge.

S&F Gun Metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 15 mm bore complete all as specified and directed by Engr-in-Charge.

S&F 15mm dia cock bib brass chromium plated screwed down for size of 15mm dia pipe complete all as specified and directed by Engr-in-Charge.

S&F Tubes 20mm Medium grade galvanised with all fittings and fixed to walls and ceiling s or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 2.5 Sqmm earth continuity of size 2.5 Sqmm to be drawn through and including PVC casing capping 20mm dia medium Grade surface in wall/floors all as directed by Engineer in Charge Notes : (i) Two wires of 2.5 Sqmm and one wire of 2.5 Sqmm and one run of PVC casing shall be measured as one unit

S&F MCB SPN 240 Volts 'C' series Breaking capacity 10 KA of rating 6-32 Amps complete all as specified and as directed (Model No 4086 14-408617 of make legrand or equivalent model in Havells/Hager/C&S/GE)

S&F for enclosure CRCA approved sheet metal enclosure 2 way vertical mounted module complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sqmm 2 core nominal cross section in service connections complete all as specified and directed by Engr-in-Charge.

Supply and fixing 25 mm (external dia) rigid non-metallic PVC conduit inclusive of all tees, bends, elbows, reducers, bail mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed by Engr-in-Charge.

S&F Hot water pipe duly insulated with glass wool and aluminium cladding including fittings etc laid in walls, floors and fittings all as specified and directed of following bores:-

(a) 15mm bore

(b) 20 mm bore

S&F Exhaust fan heavy duty steel body size sweep 300 mm sweep, single phase 230 v, 50 Hz , including making hole of required size, and louvers with fitting accessories complete all as specified and directed by Engineer in-charge. Make- Bajaj, Havells, Usha, Khaitan, Philips

S&F Exhaust fan heavy duty plastic body size sweep 250 mm sweep, single phase 230 v, 50 Hz, including making hole of required size, and louvers with fitting accessories complete all as specified and directed by Engineer in-charge. Make- Bajaj, Havells. Make- Bajaj, Havells, Usha, Khaitan, Philips

Material & Labour for concealed Point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLS cable 1100 Volts grade drawn into and including concealed PVC conduit medium grade not less than 20mm (ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes /Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup washers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge.

S&F modular switch 6 amps single pole one way for one modules as required at size of polycarbonate body ISI marked as per make at site req complete all as specified & directed.Make:Anchor

S&F modular white cover plate with frame as required size of polycarbonate body ISI marked as per make at site req complete all as specified & directed.Make: Anchor

S&F Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge Make- Anchor, Plzaa, Leader.

Supply & fixing MCB SP upto 40 amp 240 volts AC 10 KA breaking capacity 'c' series 'ISI Marked complete all as specified and directed.Make: Legrand,Schneider.

Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in any type of soil etc all complete.

Excavating in trenches, exc 1.5m wide & exc 1.5m but n exc 3.0m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in ant type of soil etc all complete

Removing excavated soil exc. 50m but n exc 100m & depositing where directed at a level n exc. 1.5 m above the starting point

Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.

Supply and laying of steel water Tubing, dia ISI Marked, '“Medium grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in under road/wall or floor with all fitting complete all as specified of following sizes: -

(a) 15mm dia

(b) 20mm dia

(c) 25mm dia

Supply and laying steel water Tubing, 25 mm (1”) dia ISI Marked, '“Medium grade' galvanised, including tube fittings Viz Tees Socket bends elbows, union nipple etc screwed and socketed joint laid in trenches/under road with all fitting complete all as specified.

M&L of brick masonry valve pits of size 1200MM x 1200MM x 1000MM (internal dimension) including PCC (1:4:8) type D2 foundation using 40mm thick crushed stone agreegatge 750mm thick PCC (1:2:4) type B2 as in floor base using 40mm crushed stone agregates one brick work thick wall all around the chamer bhamber brick work in CM (1:4) internal plaster and external pleaster 15 mm from top in CM (1:4 ) and fabrication of M S cover made out of 3 mm thick MS sheet and angle iron frame made out of 40 mm x 40 mm x 6 mm thick and one side provided with hinges and another side provided with locking arranement including excavation and earth work, painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed by Engineer-in-Cahrge.

M&L for making run lead joints including jointing materials complete for the 150mm bore CI/DI pipe complete all as specified & as directed by Engineer-in-Cahrge. NOTE : Excavation/Earthwork will be measured and paid seprately.

M&L for push on Tyton Joints for 150 mm dia S/S DI pipe complete all as specified and directed. Note : Excavation will be measured and paid seprately.

Cutting 200 mm cast iron pipes and reducing to 150mm GI pipe required length before laying in position for insertion of new tees, branches, etc all as specifed and directed

Supply, laying, jointing, commissioning and testing D.I Pressure pipes "ISI" marked to IS:8329/2000 of dia 150mm with socket spigot ends suitable for "Push-on joint" in standard working lengths supplied with a rubber gasket (tyton joint) IS 5382/1985 duly "ISI" marked for water, Gas and sewerage, class K-7 with socket and with cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe laid in trenches complete all as specified and directged of Eng- in -charge Make :ELECTRO STEEL/JINDAL/TATA .

Supply and fix 150MM sluice valve all as IS -14846-2000 PN 1.6 with gun metal spindle both ends flanged and drilled with necessary holes for bolts including jointing materials viz nuts, bolts, rubber gaskets etc with iron wheel head including flange joints and making necessary arrangements to fix in position complete all as specified and directed . Make: Upadhaya Valves / Hazra/ Kirloskar / VENUS

S&F 150MM CI Non return valve making necessary arrangements to fix in position complete all as specified and directed . Make: Upadhaya Valves / Hazra/ Kirloskar / VENUS

Supply and fix cast iron Air Release Valve 150MM with two air out lets complete all as specified and directed Make: Upadhaya Valves / Hazra/ Kirloskar / VENUS

Cutting of existing road for laying /passing through CI Pipe line 80 to 150 mm bore incuiding necessary excavtion ,returing filling in hard soil material to a distance not exceeding 100mtrs and making good disturbed surface with exsiting one after laying of pipe line all as directed by Engr -in charge.

M&L for Fittings for spigot socketed cast iron pipes 80 to 300 mm bore such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, `Y' junction, double branch, cross (all sockets or socket and spigot), collars, caps and plugs complete.

M&L for making foundation thrust blocks/support pillars for holding pipe line/clamp support etc by PCC 1:2:4 type B1 (using 20mm graded aggregate size) and using extra cement making good to surfaces complete.

shri krishna traders

Sachdeva Enterprises