Provision of Electrical accessories at various floors other than VIP floors in Sanchar Bhawan, New Delhi. Ch. to RM of EI and Fans

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.

2 x 1.5 Sqmm + 1 x 1.5 Sqmm earth wire

2 x 2.5 Sqmm + 1 x 2.5 Sqmm earth wire

2 x 4 Sqmm + 1 x 4 Sqmm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required.

2 x 1.5 sq. mm

3 x 1.5 sq. mm

6 x 1.5 sq. mm

3 x 2.5 sq. mm

3 x 4 sq. mm

6 x 4 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

20 mm Steel conduit

25 mm Steel conduit

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

20 mm medium class PVC conduit

25 mm medium class PVC conduit

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required

5/6 amps switch

15/16 amp switch

3 pin 5/6 amp socket outlet

6 pin 15/16 amp socket outlet

Bell push switch

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.

3 Module (100mmX75mm)

4 Module (125mmX75mm)

6 Module (200mmX75mm)

12 Module (200mmX150mm)

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply & fixing of following accessories etc. as required:

Call Bell Ding Dong type (Anchor/ Roma/ Bajaj)

100w stepped type electronic Fan Regulator (Anchor/ Havells /CONA)

6A, 3 Pin, Polycarbonate Plug Top (Anchor/ Havells/ CONA)

16A, 3 Pin, Polycarbonate Plug Top (Anchor/ Havells/ CONA)

2.5/ 3.15 mfd Capacitor for ceiling/wall fan [Epcos/ Asian/ Tipcon make]

0.5w, B-22 base, Green & Red colour, LED frosted ball lamp [HPL/Havells/ Philips/ Osram]

2.5w/ 3w, B-22 base, 2700K, LED Lamp [HPL/Havells/ Philips/ Osram]

Supplying of Electronic Remote call bell [battery cell type] etc. complete as reqd.(Make: Cona/ Anchor or similar superior make)

S/F of following sizes of pvc casing and capping etc. complete as reqd. (Make: AKG/ MK)

20mm x 12mm

25mm x 16mm

32mm x 16 mm

50mm x 16mm

S/F of wooden type Extension board for operating of electrical apparatus having following polycarbonate electrical accessories including making inter-connection with suitable size of pvc insulated copper wire etc. complete as reqd. (Accessories make: Anchor/ Cona/ Finolex/Polycab) Wooden box of size 8"x13" with 3 mm thick phenolic laminated sheet Switch 15 amp. - 2 Nos. Socket 15 amp. 6 pin - 2 Nos. Switch 5 amp. -2 Nos. Socket 5 amps. -2 Nos. 3C x 2.5 Sqmm Cu Flexible cable - 2 Metre. Plug Top 15 amps. - 1 No.

S/F of 6 Amp 4 outlet power strip controlled by common switch with surge protection suitable for 230 Volts, 50 Hz Single phase AC supply having connecting lead, safety fuse etc. complete as reqd. (Make: Havells/ Anchor/ Philips)

S/F of following Flexible pipe etc. complete as reqd.

25 mm PVC

S/F of following size PVC insulated, PVC sheathed copper conductor round flexible cable of 1.1 KV Grade etc complete as reqd. [Finolex/ Havells/ Polycab/ Kalinga make]

3 x 1.5 Sqmm

3 x 2.5 Sqmm

2 x 1.5 Sqmm Twin Flat Cable-White

S/F of following type heavy duty exhaust/ wall/ ceiling/ pedestal fans suitable for operation on 230V, 50 Hz single phase AC Supply complete as reqd. (Make: M/S Almonard/ Crompton/ Havells/ Usha/ Orient)

12" size Heavy duty Exhaust fan- 900 RPM, 674 CFM

400 mm sweep, 1350 rpm, Plastic body wall fan

400 mm Sweep, 1350 rpm Pedestal Fan

1400mm Ceiling fan

S/F of following electrical accessories suitable for operation on 220V 50 Hz AC supply, for existing luminaire complete as reqd. (Make: M/S Havells/ Bajaj/ Wipro/ Philips)

PVC Insulation Tape Roll, 0.125mm thick x 8 m long

15 Watt, LED Bulb B-22 base pin type

S/F of following LED Fittings etc. complete as reqd. a) Wattage : As per detail below + 10% b) System lumens efficacy : Not less than 110 lumen per watt c) Driver efficiency : Not less than 85%, d) CRI : Not less than 80 e) LED Life : Not less than 50000 hours @ LM 70% f) Colour temperature : 5500 - 6500 K g) Operating voltage range : 160 Volt to 270 Volt h) Installation type : Wall / Ceiling surface installation i) Material of construction for housing : Polyuminum die cast j) Internal surge protection : Not less than 2.5 kV k) Ingress protection (IP): Not less than 20. (Make: Phillips, Havells, Wipro)

9/10w, 6500K, 600mm long LED tube with batten/box

5 watt, LED Down lighter fittings (surface/recess) ( In round / square shape)

15 watt, LED Down lighter fittings surface type (In round shape) with white powder coated polycarbonate housing and pressure die cast sink with heavy duty driver having THD <10% etc complete as reqd.

S/F of fancy type engagement light fitting having three sides metallic casing and glass/ PVC sheet cover at front including red & green 0.5w LED lamps (B-22 base etc. complete as required.

Note:- 1. The GST / other Input Tax Credit (ITC) taxes shall be quoted by the firm as applicable as per latest amendments of GST Rules. 2. The contractor shall provide correct tariff heads & other details to enable BSNL claim Input Tax Credit. 3. Servicing Scrap items will be credited to the firm. The rate may be quoted accordingly. 4. Bidder must mandatorily quote for all GST components (CGST, SGST, and IGST) as required. 5. If annual maintenance contract charges are required to be quoted as per SOW, basic charges should be shown in column 4 & the Goods and Service Tax (GST) in column 7 to 12. 6. The bidder who submits the offer with concessional Goods and Service Tax (GST) shall submit the proof of applicable concessional GST. In case the Concessional GST is not creditable to BSNL it should be included in the price of the goods/services. 7. In case, dealer is registered under compounding scheme or any rule/notification where the BSNL is not eligible for input tax credit then the bidder should not disclose any amount in column 7 to12 & 14. 8. % age Rate of FF & Packing should be shown of basic unit price excluding all taxes & charges (i.e. as %age of col.4). 9. The FF & packing amount quoted shall not be subject to change after bid evaluation /ordering on account of change of copper, lead base price, change in duties & taxes of item etc. 10. Bidder must mandatorily mention HSN & SAC numbers.15. Evaluation of bids: - The evaluation and comparison of responsive bids shall be done on the basis of Net cost to BSNL on the prices of the goods & Services (i.e. complete work) offered along with all applicable Taxes, packing Forwarding Freight & Insurance charges etc. exclusive of GST. Declaration by Bidder: 1. We hereby declare that in quoting the above prices, we have taken into account the entire credit on inputs available under the GST Act introduced w.e.f. 1 July 2017 and further extended on more items till date. 2. We hereby certify that HSN/SAC shown in column 17 are correct & credit of GST for the amount shown in column 14 above are admissible as per GST Laws. Name of bidder: Seal of Company:

PAWAN ENTERPRISES

M/S R K JATOLIA ENTERPRISES

kashyap electricalsd

S.K.ELECTRICALS

M/S L.K.Associate