Line Shifting work of 33KV 11 KV LT Line and others

Amount

Part A (Materials Provided by contractor)

33 KV ‘XLPE’ cable 3x400 mm².

33 KV ‘XLPE’ Cable 3x300mm²

11 KV ‘XLPE’ Cable 3x185mm²

ST Pole 11 M Long

1x1000 mm² XLPE LT Cable

3.5x400 mm² XLPE LT Cable

3.5x240 mm² XLPE LT Cable

33 KV Top Channel 125X65X3200 mm

33 KV Polymer Disc Insulator 70 KN

33 KV Disc fitting B&S Type

11 KV Top Channel 100x50x2240mm

33 KV ‘XLPE’ C/J Kit 3x400 mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x400 mm² St. through

33 KV ‘XLPE’ C/J Kit 3x300 mm² St. through

11 KV ‘XLPE’ C/J Kit 3x185 mm² Outdoor

11 KV ‘XLPE’ C/J Kit 3x185 mm² Indoor

11 KV ‘XLPE’ C/J Kit 3x185 mm² St. through

PG clamp for Dog

Danger Board with Clamp

Barbed wire

Bolts, Nuts & Washers.

33 KV Top channel clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make.

33 KV M.S. Angle Iron 65x65x6mm bracing with clamps (with nut bolt for ST Pole by 50x8 mm MS flat Iron make).

33 KV Stay Set complete (Stay Rod 20x1800MM, stay clamp, Stay Insulator and Stay wire 7/8 SWG 10 Kg Per set) with grouting complete.

Earthing complete (20x2500mm earth rod with 5mm GI Wire full length).

11 KV M.S. Angle Iron 65x65x6mm,2700mm bracing with clamps (with nut bolt for ST Pole by 50x8 mm MS flat Iron make).

11 KV Top channel clamp with nut bolt for ST Pole with nut bolt by 50x6 mm MS flat Iron make.

11 KV Stay Set complete (Stay Rod 16x1800MM, stay clamp, Stay Insulator and Stay wire 7/10 SWG 5 Kg Per set) with grouting complete.

11 KV MS channel (Dropper) 100x50x2028 mm for fuse set.

Holding clamp for fuse set with nut & bolt

Copper L Piece 62x225x12mm (LS)

4 core LT MCB with Box

Al. lug 240/400/630 sqmm as per site requirement.

Aluminium Paint.

Red oxide Paint.

PART - B- WORK

Erection of Double pole structure on 11 mtr ST Pole for 33 KV one side O/H and one side cable rising for Double circuit line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, Disc Insulator with fitting, barbed wire, earthing, etc. complete) (Note-Grouting of pole as per resspo).

Erection of Double pole structure on 11 mtr ST Pole for 11 KV only cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron bracing with clamps, top channel 100 x 50 x 2240 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) (Note-Grouting of pole as per resspo).

Laying of 33 KV 3x400/300 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (2M depth (as per site requirement) x1M wide) below ground level by fixing bricks(4½˝) on both side of trench and 9˝ brick laying at the centre of the trench along the cable. Fixing brick slab on top after filling sand around the cable including cost of bricks and sand/as per site reuquirement HDD Method can be use.

Laying of 11 KV 3x185 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (2M depth (as per site requirement) x1M wide) below ground level by fixing bricks(4½˝) on both side of trench and 9˝ brick laying at the centre of the trench along the cable. Fixing brick slab on top after filling sand around the cable including cost of bricks and sand/as per site reuquirement HDD Method can be use.

Laying of LT 3.5x240/400/1x1000 mm² cable by digging pit & making trench in Proper size (2M depth (as per site requirement) x1M wide) below ground level by fixing bricks(4½˝) on both side of trench and 9˝ brick laying at the centre of the trench along the cable. Fixing brick slab on top after filling sand around cable including cost of bricks and sand/as per site reuquirement HDD Method can be use.

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300/400 mm² Outdoor & Straight Through.

Jointing charge of 11 KV ‘XLPE’ C/J Kit 3x185 mm² Outdoor & Straight Through.

Rising of 33/11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Labour charges for inserting of MS Pipe, Rising of 33 /11 KV cable and jumpering complete work.

special Pipe Earthing Complete for Cable jointing Kit with materials provided by contractor.

Safely Dismantle of existing 11 KV & LT Cable under the cable trench/ground and necessary work for extension of cable to be shifted.

Electrical Disconnection of LT A Box/B Box (5 mtr shifting),11 KV Feeder pillar box and related earthing with etc work.

Charges of Plinth for A Type Distribution Box

Charges of Plinth for B Type Distribution Box

Charges of Plinth for 11 KV Feeder pillar box

Shifting, loading, carrage and installation of existing 630/400/250 KVA T/F 11/0.4 KV (FRP fencing must be require)

Loading, Carriage, Unloading & Installation of 11 KV Feeder Pillar Box and earthing in all respect.

Loading, Carriage, Unloading & Installation of LT Distribution Box and earthing in all respect.

Electrical reconnection of LT A/B Type Box, 11 KV Feeder pillar box and related work.

Dismentling charges of existing Doube pole on 11 mtr. Long ST Pole complete.

Dismentling charges of existing Single pole on 11 mtr. Long ST Pole complete.

Dismentaling of old ACSR Dog conductor and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old- and damaged-Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

V.K. TRADERS