15th Finance 2025-2026 Million Plus Cities Chalenge Fund For SWM

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete In hard stiff clay, stiff black cotton soil, hard red earth, sales, murrams, gravel, stoney earth, earth mixed with small sized boulders and hard gravelly soil S.S.20B G,L Brace Compound wall Grade beam

In soft disintegrated rock, laterite, soft rock or kankar not requiring blasting

Supplying and filling in foundation and basement with filling M.sand in layers of not more than 15 cm thick well rammed consolidated etc. complete complying with standard specification and as directed.For footing Base

Plain Cement Concrete 1:4:8 Mix (one part cement, four part sand and eight part of aggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. For footing Base

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. Column 1.50m to 4.50m below GL

Coloumn below GL upto 1.50 m

Column above GL upto 4.50 m

Column above 4.50 m upto 7.32 m

Column above 7.32 m upto 10.92 m

Braces at GL

Braces at 2.53 m from GL

Braces at 5.26 m from GL

Braces at 7.99 m from GL

Floor beam at 10.92m from G.L.

Floor slab at 11.58 m above G.L.

Side wall from 11.85m to 14.64m above G.L.

Haunches from 11.85m to 12.03m above G.L.

Side wall above 14.64 m to 15.40m above GL

Roof slab at 15.40m above G.L.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers. Compound wall

Supplying and erecting centering for vertical plain/ RCC concrete walls of supply channel, retaining wall etc upto 90Cm height with necessary supports,all cross bracing with mild steel size of 90cm x60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x25 mm x3mm for bearing laid silver Oak/ Country wood joist of size 7.50 cm x5.0 cm spaced @ about 90 cm C/C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C/C etc,, complete complaying with standered specfications and as directed by the departmental officers. OHT Column footing (plane surface)

Column 0 to 3.30m ht. above G.L and below GL

Column above 3.31m to 4.30 ht from GL

Column above 4.31 m upto 5.30 m

Column above 5.31 m upto 6.30 m

Column above 6.31 m upto 7.30 m

Column above 7.31 m upto 8.30 m

Column above 8.31 m upto 9.30 m

Column above 9.31 m upto 10.30 m

Column above 10.31 m upto 10.92 m

Plain Surface For G.L. brace

I Braces at 2.53 m from GL

II Braces at 5.26 m from GL

III Braces at 7.99 m from GL

Floor beam sides from 10.92 m

Floor slab and working platform at 11.58 m above G.L..

Roof slab at 3.55 m above floor slab

Curved Surface - Floor slab upto 3.30 m above plateform

Side wall upto 3.30 m above floor slab (inner face)

Side wall from 3.31 m to 4.30 m above floor slab (inner face)

Side wall upto 3.30 m above floor slab (outer face)

Side wall from 3.30 m to 4.30 m above plateform (outer face)

Roof Slab sides from 3.30 m to 4.30 m above platform

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including cost and conveyance of all other labour and material charges, finishing, curing, etc., complete complying with standard specification Compound wall

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3. OHT + Compound wall

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications Compound wall, top

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications. Column Braces at 2.53 m from GL, Braces at 5.26 m from GL, Braces at 7.99 m from GL, Floor beam at 10.92m from G.L. Floor slab bottom. Floor slab side, Floor slab projected portion, Side wall, Roof slab side, Compound wall, top

Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., to required height and clear width of 45cm consisting of two Nos. of vertical post of 10cm x 15cm and step slab of 25mm x 25mm etc. complete and as directed by Deparmental officers

Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by Deparmental officers

Refilling the foundation with excavated earth including consolidation and cost and conveyance of all other labour and material charges to site etc., complete complying with standard specifications as directed by Deparmental officers

Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by Deparmental officers

Supply and delivery of 10HP (50LPMX275 HEAD) THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 15OMM DIA BOREWELL AS PER IS 8034/2002 WithOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 with latest amendments and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainlesss steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/difuser With ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor asper IS9283 suitable for operation in AC 3 phase 415v+/- 10%,50 HZ +/- 5%

Towards cost and supply of 65 mm GI pipe (B class) including cost and conveyance of all labour and material charges to site etc, complete complying with standard specifications.

Earth work excavation &depositing on bank with inial lead of 10m and lift 2m in all classes of soil ifor the pipe line trench ncluding cost and conveyance of all materials and Labour charges ete, complete

Supply and delivey of 75 MM PVC pipe 6 Kg/cm2 ISI As per standard specification including all charges etc,complete conforming to IS 4985/2000

Laying and joining of 75 mm outer diameter 6kg / cm2 I.S.I.make PVC and GI pipes with Proper gradient including cost and conveyance Complete complying with standard specifications and as directed by the departmental Engineers.

Refilling the Excavated earth including well Consolidation including cost and conveyance complete complying with standard specifications and as directed by the departmental Engineers.

Please Enable Macros to View BoQ information