EXTERNAL/ INTERNAL PERIODICAL SERVICES AND CONNECTED ITEMS IN CERTAIN BLDG AT ZONE-A BASE HOSPITAL UNDER GE (E/M) BASE HOSPITAL DELHI CANTT-10

Amount

M & L for complete removal of existing treatment from old decorated wall surface by scrapping using electrically operated grinder machine/ electric regmal machine and applying one coat of wall care putty then scrubbing by sand paper to prepare a even surface and applying priming paint and applying one coats of oil bound distemper (OBD) of any colour complete all as specified and directed.

M & L for preparing the old surface of ceiling by washing down and rubbing and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying one or more coat of oil bound distemper on patches to bring the whole surface at par and applying one coat of oil bound distemper (OBD) on ceiling complete all as specified and directed.

M & L for preparing the old surface of wall by washing down and rubbing and removing all loose layers of old treatment, efflorescence, soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying with roller one coat of plastic emulsion interior gde paint on walls complete all as specified and directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping using electrically operated grinder machine/electric regmal machine and applying one coat of wall care putty then scrubbing by sand paper to prepare a even surface and applying priming paint and applying with rollar two coats of plastic emulsion interior gde paint of any tint on walls complete all as specified and directed. (Note for BOQ item 3 & 4: The work should be executed by skilled applicators approved by the manufacturing company).

M&L for preparation of old wall surface and applying one coats of cement based paint on wall complete all as specified and as directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping using electrically operated grinder machine/electric sand paper machine, washing down with water and applying one coat of wall care putty as levelling course, then scrubbing by sand paper to prepare a even surface and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved over and including a coat of priming paint complete all as specified and as directed. Note: Quoted rates shall deemed to be includes painting at any height including scaffolding work, as required.

M&L for preparation of old decorated, wall, chequered type floor roof (corrugal) surface, by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved (to match with the Existing surface) complete all as specified and as directed. Note: Quoted rates shall deemed to be includes painting at any height including scaffolding work, as required.

M&L for preparing the old painted wooden surfaces of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and priming the requisite surface with pink primer incl. applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing the old painted steel surfaces of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and priming the requisite surface with red oxide/Zinc chrome primer incl. applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for preparing the old painted wall surface/Kerbstone by brooming and removing all loose layes of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying one coat of synthetic enamel paint on patches to bring the whole surface at par and applying one coat of synthetic enamel paint on walls/ Kerb stone complete all as specified and directed.

M&L applying texture finish of any Colour/pattern /texture/Wall paper over a coat of oil based primer over a coat of birla white putty after complete removal of existing texture surface of wall complete all as specified and directed.

Taking down cement plaster/grit on brick or stone wall etc including racking out joint, hacking for key, scrubbing down with water etc.complete all as specified and directed

M& L for 15mm thick rendering in cement mortar 1:4 (at any height with scaffolding) on other than faces of brick or concrete surfaces finished even and smooth without using extra cement mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: WPC shall be measured and paid separately under respectively item of this schedule.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on internal fair surface of brick/concrete surface of wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick cement plaster in cement mortar 1:3 on fair face of brick or concrete surface/ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly wall surface and applying two coats of cement based paint on new plastered surfaces of wall complete all as specified and as directed.

M & L for preparing the newly plastered wall surface and applying two coats of oil bound distemper over a coat of wall care putty as levelling course on plastered surfaces on walls complete all as specified and directed.

All as per item No 17 above applying two coats of oil bound distemper in ceiling surfaces.

Supply only liquid water proofing compound complete all as specified & directed.

M&L for guniting of spelled/corroded reinforced cement concrete surface, on vertical surface, on vertical or overhead position, comprising of chipping of spelled and loose concrete; cleaning rust form reinforcement by sand blasting; scrubbing down concrete surface with wire brushes; cleaning with water; allowed to dry and applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited; applying two layers of guniting over steel welded wire mesh having 4mm dia of wire and aperture 75mm, total thickness of gunite not exc 40mm thick (average thickness) in cement mortar 1:2 using OPC 53 grade cement duly mixed with polycrete admixture @2% by weight of cement or as per manufacturer's instruction and finally applying cement plaster over gunite surface of required thickness to give even uniform and smooth finish conforming to proper geometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins. fascias, parapets, lintels columns & beams etc with and including necessary scaffolding, shuttering, chases to brick work or RCC members etc, complete all as specified and as directed. Note: (i) Site shall be handed over as per availability and requirement/ piece meal. The contractor shall have no claim on this account, payment shall be made as per actual measurement of work done by the contractor. (ii) Wall putty to be used shall be cement base.

Vishal Traders

KRISHANA ELECTRIC WORKS

friends associeates

M/S Rohit Enterprises

MAA SANTOSHI ENTERPRISES

M/s Durga Traders

S D Constructions