Certain Repair to PLASTERING, FLOORING, Water Supply, ROOF and OTHER CONNECTED WORK in OTM Accn under AGE B/R-I of GE (N) Bikaner at Mil Stn Bikaner

Amount

Demolition of brickwork or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge.

Demolition of reinforced cement concrete as in chhajas, parapets etc, not exc. 15cm thickness complete all as specified and as directed by Engineer-in-Charge.

Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises complete all as specified and as directed by Engineer-in-Charge.

Demolition of lime concrete of any descripton and in any position not other wise specially provided for complete all as specified and as directed by Engineer-in-Charge.

Dismantling Asbestos cement Corrugated sheets in roof covering complete all as specified and as directed by Engineer-in-Charge.

Dismantling plain or corrugated steel / transulecent sheeting any gaugr pattern thickness incl nanital or similar pattern complete all as specified and as directed by Engineer-in-Charge.

Dismantling one way Jaffri including taking as under of battens in trellis complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster (any thickness and incl tiles if any) on brick or stone walls including raking out joints hacking for key scrubbing down with water etc, complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames not exc. 1.50sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames exc. 1.50sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and as directed by Engineer-in-Charge.

Taking down door shutter of any description exc 1 sqm but not exc 2 sqm and refixing in the same opening, complete all as specified and as directed by Engineer-in-Charge.

Taking down door shutter of any description exc 1 sqm but not exc 2 sqm and romoving to store complete all as specified and as directed by Engineer-in-Charge.

Taking down door shutter of any desc exc 2 sqm and romoving to store complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description (Aluminum ) and refixing in same opening after carrying out necessary repairs , securing rails ,tightening scews ,hinges etc

Taking down Aluminium door including chowkhat if required and repair the same including repair of rubber bedding , aluminium clip, adjustment of glass repair of floor spring or hydraulic door closer with oiling or greesing etc including adjusment of horizontal or middle style, complete all till the staisfaction of engineer-in-charge.

Taking down aluminum windows including frame if required and repair the same including repair of rubber bidding,aluminum clip,adjusment of glasses,repair of floor spring or hydraulic door closer with oiling or greesing etc including ajusment of horizontal, vertical or middle style, complete all as till the satisfaction of Engr-in-charge.

Dismantling of existing false ceiling of AC sheet etc , complete all till the staisfaction of engineer-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from old wooden or metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed by Engineer-in-Charge

Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections, 25 mm bore fixed on walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.

Dimantling of pipes of any description fixed to wall or laid under floor etc complete all as specified and as directed by Engineer-in-Charge.

Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 ltr but not exc 500 ltr complete all as specified and as directed by Engineer-in-Charge.

Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 500 ltr but not exc 1000 ltr complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantling 40 Sqcm and over in section in any posn in framed work complete all as specified and as directed by Engineer-in-Charge.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section, in framed work in any position etc complete all as specified and as directed by Engineer-in -Charge.

Dismantling structural steel any description including door steel gates etc complete all as specified and as directed by Engineer-in-Charge.

M&L Precast reinforced cement concrete pillarrs moulded using 1:2:4 type B-1,20 mm graded aggregate as in precast posts , fencing posts staring or terminal posts struts etc for RCC jail average sectional area n exc 100 sqcm and height not exc 1 m with or without chamfered angle and flat , splayed , rounded or mitred tops complete all as specified and as directed by Engineer-in-Charge.

M & L Providing cement concrete RCC jalli 35mm thick type B0 1:2:4 using 12.5mm graded aggregate (measured solid) including all mouldings but excluding frames complete all as specified and as directed by Engineer-in-Charge.

M & L Brick work with sub class 'B' bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M & L Brick work with sub class B bricks straight or curved on plan to any radius in half brick walls built in CM 1:4 parapet complete all as specified and as directed by Engineer-in-Charge.

M&L brick work with fly ash bricks straight or curved on plan to any radius built in CM 1:4 all as specified.

M&L cutting to existing flooring (Kota/Mosiac/stone flooring ) with and including polishing repaing complete all as specified and as directed by Engineer-in-Charge.

Rendering 15mm thick on fair faces of brick or conc. Surfaces in cement mortar 1:6, even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. (Note: Plaster shall be carried out in patches and contractor shall have no claim for any height and scaffolding what so ever is the location)

Rendering 5mm thick on fair faces of concrete surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling complete all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

M&L cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foudation, filling, sub base and mass concrete complete all as specified and as directed by Engineer-in-Charge.

M&L 40mm thick PCC type B-1(1:3:6) using 20mm graded aggregate as in PCC flooring finished with out using extra cement complete all as specified and as directed by Engineer-in-Charge.

Supply only 3mm thick glass 38mm wide glass dividing stripps laid in design as directed by Eng-in-charge

M & L coloured Non skid ceramic tiles exc 0.11 Sqm and n. exc 0.18 Sqm , 7mm thick in floors set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid over 15mm thick screed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Ditto all as per srl item No 42.00 above but on vertical surface over 10 mm thick rendering in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

M & L Vitrified tiles colored 600mmx600mmx10mm thick set as in floors laid over 15mm thick screed in cement mortar 1:6 and jointed in neat cement slurrry and pointed in white cement sluurry to match the shade of existing surfaces. (Note:The contractor shall have no claim on difference what so ever on shade /colour of tile)

Ditto all as per srl item No 44.00.00 above but on vertical surface over 10 mm thick rendering in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.

M&L Non skid Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors laid over 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

Glazed ceremic tiles white 450X300mmX7mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick rendering cement mortar in 1:4 complete all as specified and as directed by Engineer-in-Charge.

Machine cut kota stone slab 18 - 20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incl.rubbing and polishing laid over 20 mm thick cement screed base in CM 1:6. The joints shall be 20mm wide filled with cast in situ tarrazo with white marble chips of size up to 6mm complete all as specified and as directed by Engineer-in-Charge.

Ditto as per Srl item No 48.00 above but in skirtings laid over 10mm thick backing layer in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L Providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed by Engineer-in-Charge.

M&L Sand stone slab 40-50mm thick n. exc 2 m in length set jointed and pointed self faced punched dressed laid as in plinth protection laid over 15mm thick screed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L Sand stone slab 40-50mm thick n. exc 2 m in length set jointed and pointed self faced punched dressed laid as in chhajas, sunshade and man holes covers set in cement mortar including making chases in wall complete all as specified and as directed by Engineer-in-Charge.

M&L Granite 19 mm thick of any type work table rubbed and polised in steps,jambs,pillars,window cill, cooking plateforms and like in cement mortar 1:4 including pointing cement mortar 1:2 using marble dust with admixure of pigments to match with shade of granite complete all as specified and as directed by Engineer-in-Charge.

M&L Rendering 15mm thick on fair faces of brick /stone patti or conc. Surfaces in cement mortar 1:4 finished even and smooth w/o using extra cement as on roof slab mixed with water proofing compound as per manufacturer’s instructions of Dr FIXIT/Sikka. (Note :- Supply only of liquid water proofing compound shall be measured and paid for separately under appropriate item of this schedule)

M&L Preparing surface and cleaning of concrete slab by wire brushing and aplying evenly a tack coat of industrial bitumen 85/25 @ 1.70 Kg per sqm including cleaning surfaces complete all as specified and as directed by Engr-in-chanrge.

M&L 50 micron polythylene sheet supplied and fixed complete all as specified and as directed by Engr-incharge.

M&L Lime concrete terracing as in roof complete all as specified.( Note for srl Item No 57 & 58 :- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.

M&L Extra over Lime concrete terracing for top surface trowelled smooth incl cement mixture to make homogeneous paste.

M&L 40 mm thick Brick tiles bedded in 15 mm thick cement and sand mortar (1:6) and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.

M&L PCC type B1(1:2:4) using 20 mm graded cushed stone agg as in bands/coping ,benching and the like incl form work complete all as specified and as directed by Engr-incharge.

M&L Reinforced cement concrete type B-1 (using 20mm graded crushed stone graded aggregatework as in slabs supported on walls , beams etc complete all as specified and as directed by Engr-incharge.

M&L Form work to soffits of suspended slabs and similar work not exceeding 200mm thick complete all as specified and as directed by Engr-incharge.

M&L Mild steel steel TMT bars 10MM dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and as directed by Engr-in-chanrge.

M&L Mild steel steel TMT bars 6mm to 8mm dia and over cut to length bent to shape reqd ,incl cranking ,bending spirally for hooping columns hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and as directed by Engr-in-charge.

M&L 6mm thick asbestos cement corrugated or semi corrugated sheets in roof, walls, etc., complete all as specified and directed, fixed with 'L' or 'J' hook or cranked bolts complete all as specified and directed by Engineer-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts but except Sheet complete all as specified and directed by Engineer-in-Charge. (Note : Old serviceable sheets retrieved from serial item No. 06.00 here-in-before shall be used under this item.)

M&L Asbestos cement two piece adjustable ridge 6mm thick fixed with L or J hooks / coach screws complete all as specified and directed by Engineer-in-Charge.

M&L rolled section /tubular section as in main and cross beams , purlins , rafters ,posts where connected to common rafter and running rails etc conforming to Fe- 410-w complete all as specified and directed by Engineer-in-Charge.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screw and washer in roof, wall etc, complete all as specified and directed by Engineer-in-Charge.

M&L Pre-painted galvalume aluminium zinc coating GI based plain steel sheet high rib profile type pattern color coated 0.6 mm thick sheets factory made having tensile strength of 550 Mpa (AZ-150) as in roof covering and fixed as per manufacturers instruction (design as approved by Engineer- in- charge complete all as spfd )

M&L 0.8mm thick Pre-painted galvalume aluminium zinc coating GI based plain steel sheet color coated factory made having tensile strength of 550 Mpa (AZ-150) as in ridges fixed with self driven screws complete all as specified and directed by Engineer-in-Charge.

S&F 0.63mm thick galvanised mild steel corrugated sheets with two corrugation side lap fixed with J or L hooks in roof wall etc with grade of zinc coating 275 ,complete all as specified and directed by Engineer-in-Charge.

S&F in repairs anodised aluminium snap grid frame work of size 605xx x 605mm for false ceiling including necessary notching. The snap grid shall consist of anodised aluminium main/cross tee of size 36.5 x 25 x 1.4mm weighing 0.24Kg/RM and 23.5 x 26.4 x 1.4mm weighing 0.191 Kg/RM respectively. The main and cross T section shall be jointed at junction crossing with anodised aluminium angle bracket of size 15 x 15 x 1.5mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washers. The snap grid shall be supported at ends all along with wall with anodised aluminium angle of size 40 x 25 x 2mm wieghing 0.36Kg/RM fixed to wall with suitable arrangements and providing 12mm thick semi perforated particle board in grid and applying two coats of synthetic enamel paint over a coat of pink primer after preparation of surfaces complete all as specified and as directed by Engr-in-Charge.

S&F Composite cement ceiling board 6 mm thick in ( 595 mmX595 mm ) pannel (Make-everest) designer ceiling conforming to IS 14862 type B cateogory three incl GI frame , grid work,hold fast,suspended with suspender along with holding down bolt complete . (Note: Ceiling board shall confirming to IS-14862 ,shall be fire resistant , Moisture resistant and ceiling shall be suspended with holding down bolts suspenders and adjusters complete all as specified and as directed by Engr-in-Charge.

S & F in replacement curtain rod 20 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and directed by Engineer-in-Charge. (Note:- (i) The cost of brackets and knobs is deemed to be included in the quoted rate. (ii) Nothing extra shall be paid on this account.)

M & L Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints, kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge.

S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for single doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns and as directed by by Engineer-in-Charge.

S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns and as directed by by Engineer-in-Charge. (Note for SI No 77.00 & 78.00 here-in-before: - 1.The rate quoted shall be deemed to include for one shop coat of priming with red oxide zinc chromate primer 2. PCC filling in hollow of frame shall be measured and paid for separately under appropriate item of this schedule. 3. Pressed steel frames shall be factory made and shall be procured from one of the manufacturers as per Appendix ‘D’ . 3. Fixing of Butt hinges shall be included in unit rate quoted ).

S&F 35 mm thick, IInd class hard wood (Bonsum/Hollock) plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & as directed by Engineer-in-Charge.

S & F 35 mm thick, second class hard wood (Bonsum/Hollock), glazed & skeleton shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge. Notes for Srl item 35 & 36 & here-in-before: - 1.The contractor may use/provide Ist class hard wood “SHISHAM” for manufacturing of shutters in lieu of IInd class hard wood without any extra cost to the govt. 2. The shutters shall be procured from any of the approved manufacturers from the list given in particular specifications Section-II. 3. Glass or wire cloth shall be measured and paid for separately under appropriate items of this sch).

S&F 25 mm thick Flush shutters for cupboards solid core construction, with block board core, and ply wood face panels, both faces covered with decorative face veneer with lipping to match complete all as specified and as directed by Engineer-in-Charge.

Prelaminated partical board 19/20mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination , stitched with20 mm thick wooden bead all around fixed with screws as in shelves to kitchen almirah and cub board supply & fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F 12 mm thick plywood, 5 ply grade BWE, type BB fixed with screws to timber frame work with 0.9mm decorative laminate type 1 of surface finish, colur and pattern as approved fixed with approved adhesive as per manofacture instructions complete all as specified and as directed by Engineer-in-Charge.

S & F Factory made Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter complete With glazing bar dovtailed and making provisin for fitting AC/cooler including one shop coat of primer complete all as specified and as directed by Engineer-in-Charge.

Ditto- all as per SI No 84.00 here-in-before but without glazing bars complete all as specified and as directed by Engineer-in-Charge.

Factory made steel ventilators with top hung shutter including hung ,fixed type with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-chromate primer complete all as specified and as directed by Engineer-in-Charge. Notes for srl item Nos 84.00, 85.00 & 86.00 here-in-above :- (a) Steel windows/ventilators shall be of sizes to suit the size of opening at site and as ordered/directed by GE. (b) Steel windows/ventilators shall be factory made and shall be procured from one of the manufacturers as per Appendix ‘D’. (c) Steel windows/ventilators shall be conforming to IS-1038 and all as specified in these tender documents and MES Schedule Part-I. (d). The lugs of the steel windows/ventilators shall be fixed in P.C.C. blocks made of PCC 1:3:6 type C-1 using 20mm graded stone aggregate. Size of PCC blocks shall be 23cm x 10 cm x 15 cm. (e) Cost of providing all the above aspects including the cost of lugs & P.C.C. blocks shall be deemed to be included in unit rate quoted for above item. Cost of making good the jambs to match with the adjoining surfaces shall be deemed to be included in the rates quoted for taking down items.

S&F framed work such as grills ,framed guard bars barred iron doors ;ladders framed balusters railings and similar work conforming to Fe 410-0or Fe 310-0 complete all as specified and as directed by Engineer-in-Charge.

S & F Factory made Solid PVC door frame of size 50 x 47 mm , made out of 5mm plain coloured PVC sheet reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and making good the disturbed surfaces with plastering in CM 1:6 and the rate quoted is inclusive this element, noting extra shall be paid on this account complete all as specified and as directed by Engineer-in-Charge.

S & F 30mm thick factory made PVC solid panel PVC door, shutter conforming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15 x15mm for top & bottom rails, MS frame shall have a coat of red oxide primer of approved make and shall 'be covered with 5mm thick heat moulded PVC 'C' channel of size 30x50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mmx2)thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with 30mm wide x 5mm thick PVC sheet beading on either side and jointed together with solvent cement adhesive and an additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of 'C' Channel using PVC solvent adhesive complete as per manufacture’s specifications & drawings, all as directed by Engineer-in-Charge.

S&F anodised aluminum door window frames ,other sections for doors , windows , ventilatorswith one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified and directed by Engineer-in-Charge.

S & F in repair aluminium channel with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows complete all as specified and directed by Engineer-in-Charge.

S&F in repair sheet glass 5.5 mm thick ordinary quality & glazing with rubber gasket in squares exc 0.5sqm in each pane as in aluminium door/window complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodised barrel tower bolt of extruded section of 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F mild steel butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and as directed by Engineer-in-Charge.

S & F in Repair Piano Hinges mild steel ,bright finish width of flaps open in 40mm complete all as specified and directed by Engineer-in-Charge.

S & F Aluminium handles cast type anodised of 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F mild steel sliding door bolt plate type stove enameled black with bright bolt not less than 12mm dia with and incl. A minimum of 6bolts and nuts four on bolt plate and two on staple plate of 250mm long complete all as specified and directed by Engineer-in-Charge.

S&F mild steel barrel tower bolt ,stove enamelled black with bright bolt of 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F mild steel pressed handles oval type stove enamelled black of 150mm long complete all as specified and directed by Engineer-in-Charge.

S&F in repair 300mm mild rat tail rod pattern springs including roller and, roller plate and welded to chowkhats and taking down old unservicabale spring, complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S&F as in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

S & F Sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exc.0.5sqm in each pane complete all as specified and directed by Engineer-in-Charge.

S&F in repair MS steel window handles (left/right) fixed to steel windows including reveted / welding if required complete all as specified by Engineer- in - Charge.

S&F in repair, MS peg stay for steel window complete all as specified by Engineer- in - Charge.

M&L for welding in repairs n.exc 2.5 cm in length and not exceeding 6mm thick of metal complete all as specified and directed by Engineer-in-Charge.

S&F in repair Hasp and staple 100mm safety type,Aluminium anodised,withmild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified by Engineer- in - Charge.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 150mm size complete all as specified by Engineer- in - Charge.

S&F anodised aluminum American handle cast type 200mm long for doors complete all as specified by Engineer- in - Charge.

S&F anodised aluminum handle cast type 100mm long collapsible type complete all as specified by Engineer- in - Charge.

S&F anodised 75mm long size butt hinges , type C21 extruded aluminum alloy ISI marked complete all as specified by Engineer- in - Charge.

S&F 100 mm long Butt hinges extruded aluminium alloy , with galvanised mild steel hinge pin, anodised, type B-21, ISI marked complete all as specified and as directed by Engineer-in-Charge.

S&F Aluminium anodised, barrel tower bolt of extruded section, size 200 mm long, complete all as specified and as directed by Engineer-in-Charge.

S & F al anodised aluminum handle cast type 100mm long complete all as specified and as directed by Engineer-in-Charge.

S & F in repair pivot of suitable size and thickness as required at site for aluminium door complete all as specified and directed by Engineer-in-Charge.

S & F in repair for door closer hydraulically regulated , designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 KG and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repair brass 4 lever mortice lock, vertical type size 100mm suitble for existing aluminium door complete all as specified and directed by Engineer-in-Charge.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover, govering pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge.

Attending complaints of rolling shutters making functional by providing greasing oiling , welding etc.including taking down rolling shutters or hood if required complete all as specified and as directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engineer-in-Charge.

S&F Ball bearing for rolling shutters complete all as specified and as directed by Engineer-in-Charge.

S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls or laid in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 20mm bore tubes medium grade galvanised with all fittings and fixed to walls or laid in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 25mm bore tubes medium grade galvanised with all fittings and fixed to walls or laid in floors complete all as specified and as directed by Engineer-in-Charge.

S & F in replacement with new Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc ) including dismantling existing. complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 3 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured with three layered wall and shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Appendix “D”.

Ditto all as per Srl Item No 125.00 above but water tank capacity 1000 Ltr complete all as specified and as directed by Engineer-in-Charge.

Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed in repair of 20mm bore complete all as specified and as directed by Engineer-in-Charge. Make : Prayag or equivalent.

Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed in repair of 15mm complete all as specified and as directed by Engineer-in-Charge. Make : Prayag or equivalent.

S&F in repairs Stop valve cast copper alloy with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia fixed complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs stop valves cast copper alloy chromium plated fancy type/concealed type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

Bib taps cast copper alloy with crutch or butter fly handle screwed for iron pipe for 15mm bore dia of pipe fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs bib taps cast copper alloy chromium plated fancy type 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge.

Bib taps standard of PTMT any colour high pressure screwed for iron p[ipe and fixed of 15mm fixed in repair complete all as specified and as directed by Engineer-in-Charge. Make : Prayag or equivalent.

S&F in repairs pillar taps cast copper alloy with capstan head, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F Stop valve cast copper alloy(concealed type) with crutch or butter fly handle screwed both ends & screwed for iron pipe of 15mm dia fixed in repair complete all as specified and as directed by Engineer-in-Charge.

Angle valves, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down high pressure, screwed both ends for 15 mm bore dia iron pipe or for union, ISI marked, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

Vitreous China squatting pan “Orissa” pattern, size 580x440mm, white, with integral foot rests (excluding flushing cistern and flush pipe), with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti syphonage pipe etc, supplied and fixed in repairs, complete all as specified and as directed by Engineer-in-Charge. (Notes :- (i) WC shall be ISI marked, 1st quality and of makes specified in Appendix ‘D’ (ii) Unit rate quoted shall also be deemed to include for provision of lead joint between CI trap and outlet pipe (iii) Unit rate quoted shall also be deemed to include for labour required for fixing of flushing cistern and flush pipe and also for taking down old flushing cistern and flush pipe. Supply only of flushing cistern with flush pipe shall be measured and paid for separately. (iv) The disturbed surface of floor shall be made good as per existing specification without any extra cost to the Govt).

S&F in repairs PVC flushing cisterns 10 ltrs capacity including flushing pipe and connections complete all as specified and as directed by Engineer-in-Charge. Make : CERA ( CAT No: B1010108 , or equivalent in Parryware ,Jaquar, Hindware as approved by Eng-in-Charge .

Plastic water closet seat cover white/coloured ,closed pattern with flat bottom pattern and cover and mild steel chromium plated or aluminium hinging device fixed in repair complete all as specified and as directed by Engineer-in-Charge.

Vitreous china wash basin, white, flat back, size 550 x 400mm with and including a pair of CI brackets, etc, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.(Notes : -(i) The wash basins shall be ISI marked, 1st quality and shall be of Make as per Appendix ‘D’ (ii) The rate quoted shall be deemed to include for taking down old WHB complete with all fittings including cutting holes for taking out old brackets and supplying and fixing new WHB with new C.I brackets and also PCC blocks of PCC 1:2:4 type B-1 of size 10cm x 7.5cm x 15 cm for fixing brackets and also including new screws, plugs, cement mortar, red lead cement and other subsidiary materials required for fixing. (iii) The rate quoted shall also be deemed to include for fixing only of CP brass mixer and waste pipe with coupling. Supply only of CP brass mixer and waste pipe shall be measured and paid for separately under appropriate items of this schedule). fixed in repair

PVC connection of PTMT nuts 15x600mm long fixed in repair complete all as specified and as directed by Engineer-in-Charge.

PVC connection of PTMT nuts 15x450mm long fixed in repair complete all as specified and as directed by Engineer-in-Charge.

S & F Sink with drainage board made out of stainless steel 1.00 mm thick sheet for kitchen with plugs, washers and wastes including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm with bowl size 410 mm x 330mm x 160mm, with and including 40mm bore waste pipe of low density polyethylene pipe (LDPE) of pressure rating 6 Kg f /sq cm of required length as per site , C.P brass waste coupling, brackets etc and also for making good disturbed surfaces of walls to match with adjoining surfaces complete all as specified and as directed by Engineer-in-Charge.

S&F Chromium plated soap dish complete all as specified and directed by Engineer-in-charge.

S&F Vitreous China wash down water closet pan ( pedestal pattern), white, (excluding flushing cistern and flush pipe) but including CI ‘P’ trap and also including connection to drain (or outgoing pipe) and to flushing pipe, anti- syphonage pipe etc, supplied and fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.(Note: :- (i) WC shall be ISI marked, 1st quality and of makes specified in Appendix ‘D’ (ii) Unit rate quoted shall also be deemed to include for provision of lead joint between CI trap and outlet pipe (iii) The disturbed surface of floor shall be made good as per existing specification without any extra cost to the Govt).

S&F CP Health Faucet fixed type suitable for EWCs with 1,5 mtr stainless steel tube complete all as specified and directed by Engineer-in-charge. Make : JAQUAR, PRAYAG

S&F CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-charge. Make: JAQUAR or EQUIVALENT as approved by Eng-in-Charge .

S&F Towel ring of cast copper alloy chromium plated fixed and repair ( CAT PART NO: BA-02 , Make: PRAYAG or equivalent in Jaquar , Parryware as approved by Eng-in-Charge.

S&F two way angle cock of cast copper alloy chromium plated fixed and repair ( CAT PART NO: 7211 , Make: PRAYAG) or equivalent in Jaquar , Parryware as approved by Eng-in-Charge.

S&F Waste pipe 32mm for WHB with coupling fixed in repairs complete all as specified and directed by Engineer-in-charge .

S&F Central hole basin mixer for hot and cold water brass chromium plated screwed down with long sunk and fly nuts screwed for 15 mm dia (( CAT PART NO: 7250, MAKE: PRAYAG) or equivalent in Jaquar , Parryware as app by Eng-in-Charge.

S&F Waste pipe 40 mm for SINK with coupling fixed in repairs complete all as specified and directed by Engineer-in-charge .

S& F in repair internal fitting of PVC low level cistern as per existing pattern to make the PVC low level cistern fully functional complete all as specified and as directed by Engineer- in - Charge.

S&F in repair PVC (SWR) floor trap plain 75mm dia with PVC grating including jointing with solvent cement complete all as specified and directed by Engineer- in - Charge.

S&F PVC(SWR) single socketed in any length with rubber ring joint fixed with wall of 110mm bore as in rain water pipe complete all as specified and directed by Engineer- in - Charge.

S&F PVC(SWR) single socketed in any length with rubber ring joint laid in floors of 110mm bore as in rain water pipe complete all as specified and directed by Engineer- in - Charge.

PVC(SWR) single socketed in any length with rubber ring joint fixed with wall of 75mm bore complete all as specified and directed by Engineer- in - Charge.

S&F PVC(SWR) single socketed in any length with rubber ring joint laid in floors of 75mm bore complete all as specified and directed by Engineer- in - Charge.

S&F PVC SWR branch piece single equal or unequal 110mm bore complete all as specified and directed by Engineer- in - Charge.

PVC SWR branch piece single equal or unequal 75mm bore complete all as specified and directed by Engineer- in - Charge.

S&F PVC SWR S trap laid and jointed to 110 mm bore PVC pipes complete all as specified and directed by Engineer- in - Charge.

S&FPVC(SWR) bends any radius 110mm complete all as specified and directed by Engineer- in - Charge.

S&F PVC(SWR) bends any radius 75mm complete all as specified and directed by Engineer- in - Charge.

S&F in repair PVC cowls , 75 mm dia complete all as specified and directed by Engineer- in - Charge.

Cutting chases,pinning in making good to facing where requried and pointing in cement mortar 1:3 to ends or edge of landings,steps,cills,sunshade,shelves, lintel etc. tubes or concealed conduit etc. and making good, cutting not exc 10 cm girth complete all as specified and directed by Engineer- in - Charge.

M & L Preparing new decorated surfaces plastered/unplastered by brooming down etc and applying two coat of distemper oil emulsion over a coat of priming paint as per manufacturere's instructions on walls inner site including cornices pilasters etc white or tinted as directed by the Engr in Charge.

M & L Preparing old distempered surfaces of walls including cornices, pilasters etc and applying one coat of distemper oil emulsion, white or tinted as directed by the Engr in Charge.

M&L Preparation of newly plastered surfaces of wall including cornices, pillasters etc and applying two coats of cement based paint ,white or tinted over a coat of priming paint as per manufacturere's instructions complete all as specified and as directed by Engineer-in-Charge.

M&L Preparing old decorated surfaces treated with cement base paint of walls cornices pilaster etc and applying one coat of cement base paint (Ist quality) in plain pattern on walls complete all as specified and as directed by Engineer-in-Charge.

Preparing new surfaces (plastered or un-plastered ) of walls including cornices, pilasters etc and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge.

Preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge.

M&L Painting to new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth including preparation of surfaces, priming with pink primer (one coat) & finishing with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) and finishing with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

M&L Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Satish kumar and company

SUBHAM ENTERPRISES

N.K. CONSTRUCTION COMPANY

durga construction company

M/S ASHRAFI CONSTRUCTION CO

VIJAY KUMAR SHARMA

JAMUNA CONSTRUCTION AND GENERAL ORDER SUPPLIER