Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹29.2 L
EMD Value
₹58,400
Closing Date
23 Aug 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Renovation of Toilets at various Shops in Engine Division, HAL BC.
8348
TENDER NOTICE/NCP/08/24-25/02
Works
Contract Section Civil-FMD-Bangalore
₹0
₹58,400
23 Aug 2024
24 Jun 2024
24 Jun 2024
23 Aug 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: Renovation of Toilets at various Shops in Engine Division, HAL [BC]. CONTRACT NO. HAL/FMD/R-18/24-25
Name of the Contractor :
Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any.
1 Earthwork excavation Earthwork excavation by mechanical means (hydraulic excavator) / manual means in trenches for foundation, shafts, cesspits, wells, etc., in all soils of depth and width not exceeding 1.50m including dressing of sides and ramming of bottoms,for all lift, including getting out the excavated soil and disposal of surplus exacavated soils as directed,withinn a lead of 50 m as directed by Engineer-in-Charge. 20.00 Cum 0.00
2 Taking down/dismantling of the tiles of any description or thickness in floor/dado including separation of serviceable materials from unserviceable, removal of mortar etc and debris to be deposited at suitable place within 50 metres lead as directed by Engineer-in-Charge. 450.00 Sqm 0.00
3 Demolition of brick/masonry for making hole for exhaust fan/wall demolition/for other miscellaneous works etc constructed in CM including stacking of serviceable material & removing the debris and depositing within 50 metres lead as per directed by Engineer-in-Charge. 4.00 Cum 0.00
4 Demolition of cement concrete of any thickness any description and in any size, position for toilet work and removing/taking away demolished debris depositing at suitable place within 50 metres lead etc complete all as directed by Engineer-in-Charge. 5.00 Cum 0.00
5 Brick work with table moulded bricks built in cement mortar (1:6),at all levels/depths for wall thickness 230/115 mm including making or leaving holes & chases making good,raking out joints 10mm deep, scaffolding, curing etc.; with all materials , tools & tackles etc., all complete as directed by Engineer-in-Charge. 6.00 Cum 0.00
6 Supplying and laying antiskid ceramic tiles for floor and glazed ceramic tiles for dado confirming to IS 15622 of approved colour of kajaria or equivalent and size set jointed with neat cement slurry and pointed with coloured cement to match the tiles over and with a screed of CM (1:4) 20mm thick for floor & CM (1:3) 12mm thick for dado including curing & carrying out the acid cleaning after completion of work etc complete as directed by Engineer-in-charge. (Agency has to bring three samples tiles physically for the approval of E.I.C )
a Floor tiles (300X300) mm 150.00 Sqm 0.00
b Dado/wall 450.00 Sqm 0.00
7 Providing and fixing White vitreous china IWC (squatting pan), 'Orissa' pattern, (Hindware/Parryware) of approximate size 580 x 440 mm, with integral foot rest, with 'S' or 'P' trap with 10 ltrs capacity PVC flush tanks for connecting to IWC of approved manufacturer including CP stop cock 15mm dia fancy type with long shank and cup, fixed to pipe line etc. including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material & connection to trap and to flushing pipe, anti syphonage pipe making good to floor all complete as directed by Engineer-in-Charge. 17.00 Nos 0.00
8 providing & Fixing fancy oval type (hindware, CERA /parryware) Vitreous White colour wash basin, of approximate size 600x480mm of approved make, including connecting to floor trap, waste pipe, chain and plug and porcelain stopper including brackets & any size, including for and pinning in ends of brackets or erecting stand etc with all necessary fittings & and accessories etc., complete to be fixed inside the granite platform all complete as directed by Engineer-in-Charge. 10.00 Nos 0.00
9 Providing and applying a coat of wall care putty for wall surface approximately 3mm thick of approved brand and manufaturer and apply as per procedure with one coat of primer and including necessary surface preparation etc., all complete as directed by Engineer-in-Charge. 220.00 Sqm 0.00
10 Painting inteior surfaces with two coats of interior Emulsion paint of approved colour and manufacturer for Walls & Ceiling etc.,including preparing the surface by removing loose dirt and any organic growth,smoothening the surface by using suitable emery paper, necessary scaffolding etc., all complete as directed by Engineer-in-Charge. 620.00 Sqm 0.00
11 Disposal Disposal of building rubbish or waste materials by mechanical means, including loading, transporting, unloading to Outside the division at contractor own place as approved by Engineer-in-Charge., for all leads including all lifts involved all complete as directed by Engineer-in-Charge. 50.00 Sqm 0.00
12 Plastering in CM (1:6) 15mm thick, finshed even and smooth with trowel with necessary materials, labour, scaffolding, curing etc., at all heights all complete as per the direction of Engineer-in-Charge. 450.00 Sqm 0.00
13 Providing and laying in position Cement Concrete (1:2:4) with 20mm and down graded aggregrate at all levels including consolidation, levelling,foundations including rafts, and other miscellaneous work including curing, etc complete as directed by the Engineer-in-Charge. 5.00 Sqm 0.00
14 Form work: Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams,roof slab; and similar work etc.,Centering and Shuttering including strutting, propping etc, and removal of form work for as directed by Engineer-in-Charge. 12.00 Sqm 0.00
15 Supplying & Fixing PVC (SWR) 'P' trap 110 mm all complete as directed by Engineer-in-Charge. 25.00 Nos 0.00
16 Supplying & fixing nahani trap of 32mm for wash basin and urinal all complete as directed by Engineer-in-Charge. 18.00 Nos 0.00
17 Supplying & Fixing PTMT angle stop valve 15 mm dia of any colour high pressure screwed for iron pipe and fixed, (Minimum weight 85gms) etc complete as directed by Engineer-in-Charge. 25.00 Nos 0.00
18 Supplying, fabricating and fixing in position flush shutters 30mm thick, solid core constructions, with block board and ply wood face panels commercial type on both sides and one face is coverd with decorative face veneer with lipping / frame to match including suitable hinger this also including supplying & fixing mortice locks, latches handle door stoper etc and make a opening of (300x300)mm for viewing purpose and sides of cutting edges covered with wooden lipping, provide 5mm thick plain glass to the opening and any other fittings etc to existing chowkats., and including removal of old door shutter all complete as directed by Engineer-in-Charge. 20.00 Sqm 0.00
19 Providing & fixing door closer aluminium die cast body hydraulically regulated designation No. 3 universal type, suitables for door shutter of (851 to 1000)mm width and the weight between (61 to 80) kg with etc., complete as directed by Engineer-in-Charge. 6.00 Nos 0.00
20 Supplying and fixing of vitreous china pedestal type floor mounted water closet (European type W.C. pan) of approved make with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), angle cock, 1.5 ft long PVC connection hose, etc. conforming to IS 7231, with all fittings and fixtures, cutting and making good the walls and floors wherever required etc., all complete as directed by Engineer-in-Charge. 8.00 Nos 0.00
21 Providing & Laying 20mm thick polished Galaxy Black granite counter for wash basin (oval type) with all round bull nosing laid and jointed with CM (1:4) and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing,complete and making hole for fixing wash basin etc complete as directed by Engineer-in-Charge. (Sample to be brought for approval of EIC) 20.00 Sqm 0.00
22 Supplying & Fixing 18 mm thick both side polished Galaxy Black granite for urinal partitions, including all round bull nosing, fixing with clamp/making grooves in the wall etc in walls with CM (1:4) etc complete as directed by Engineer-in-Charge. 33.00 Sqm 0.00
23 Supply and fixing 24 mm thick factory made of U PVC door shutters to existing door frames made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and jointed at the corners by means of M.S. galvanized/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter stylesby means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a UPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineer-in-Charge. (For W.C. and bathroom door shutter) 45.00 Sqm 0.00
24 Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 48x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-Charge. 90.00 R m 0.00
25 Supplying, Fabricating and Fixing glazed ventilator with louvers made up of anodized aluminium extruded sections of high grade alloy confirming to designation 63400 of IS 737 & temper W.P (H.E.9.WP) of 'JINDAL', 'INDAL', or other approved equivalent manufacturer of size (65x40x1.5)mm and fixed with 6mm thick glass louvers (Maximum of 50mm gap shall be maintained in between two consecutive louver glass) including necessary aluminium "U" channel of having thickness 3/8 mm, glazing clip, fixed with screws etc., complete all as directed by Engineer-in-Charge. 9.00 Sqm 0.00
26 Supplying & fixing C.P floor cockroach grating setting with neat coloured cement etc complete as directed by Engineer-in-Charge. 40.00 Nos 0.00
27 Supplying and fixing of 6mm thick bevelled edge mirror of selected quality glass mounted on 6mm thick back or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers with 3" wooden beading all around of the mirror with polish etc all complete as directed by Engineer-in-Charge. 5.00 Sqm 0.00
28 Supplying and fixing PTMT soap dish holder having length of 138 mm, breadth 102mm, height of 75 mm with weighing not less than 106 gms of approved manufacture fixed with all necessary screws etc., all complete as directed by Engineer-in-Charge. 10.00 Nos 0.00
29 Supplying and fixing CP cloth hanging hooks of minimum 450 mm long having multiple hooks etc all complete as directed by Engineer-in-Charge. 25.00 Nos 0.00
30 Supplying & Fixing CPVC pipes 20mm dia with necessary fittings and fixing the pipe with clamps at 1.00 m spacing,etc and other hardware. This includes joiniting of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of EIC. pipe should be ISI were ever applicable, etc., all complete as directed by Engineer-in-Charge. 125.00 R m 0.00
31 Supplying & Fixing 110mm dia U-PVC pipes of 4 kg/cm2 SWR grade and of approved make with rubber ring joints conforming to IS 5382, jointed together with solvent, including all fittings like plain bends, collars etc., cutting and making good the walls, etc., all complete as directed by Engineer-in-Charge. 120.00 R m 0.00
32 Supplying & Fixing 75mm dia U-PVC soil pipe for waste water, including necessary fixtures such as plain bends, door bends and collers etc complete as directed by Engineer-in-Charge. 30.00 R m 0.00
33 Supplying & fixing 75mm dia U-PVC Tee (pressure 6kgs/cm2) etc complete as directed by Engineer-in-Charge. 25.00 Nos 0.00
34 Supplying & fixing 75mm dia PVC Elbow etc complete as directed by Engineer-in-Charge. 25.00 Nos 0.00
35 Supplying & fixing 110mm dia U-PVC Tee etc complete as directed by Engineer-in-Charge. 27.00 Nos 0.00
36 Supplying & fixing 110mm dia PVC Elbow etc complete as directed by Engineer-in-Charge. 25.00 Nos 0.00
37 Supplying and fixing JAQUAR health faucet model code ALD-CHR-573 8mm dia 1.2 meter long flexible tube and wall hook etc complete all directed by Engineer-in-Charge. 10.00 Nos 0.00
38 Supplying and fixing JAQUAR bib cock model code QQT-CHR-7037 etc complete all directed by Engineer-in-Charge. 20.00 Nos 0.00
39 Supplying and fixing JAQUAR concealed stop cock model code FUS-CHR-29441K with complete set all directed by Engineer-in-Charge. 10.00 Nos 0.00
40 Supplying and fixing JAQUAR 2 way bib cock model code QQT-CHR-7041 etc complete all directed by Engineer-in-Charge. 9.00 Nos 0.00
41 Supplying, fabricating and fixing in position as per approved design TMT Bars for steel reinforcement, cut to length, bent to shape required, cranking, hooking ends etc., including binding with 0.9mm dia (soft drawn) M.S wire etc. all complete as directed by Engineer-in-Charge. 100.00 Kgs 0.00
42 S/F Jaguar Wall Mixture with Jaguar Kit etc complete as directed by Engineer-in-Charge. 10.00 Nos 0.00
43 Supplying and fixing vitreous china Large urinal of approved make, fixed to the wall by using plugs embedded in cement mortar (1:2) including jointing with cement mortar or putty wherever required, cutting and making good the walls and floors, connecting to floor trap etc. with all necessary fittings and accessories like flush pipe, CP spreader, 32 mm dia semi-rigid PVC waste pipe, coupling, clamps etc., all complete as directed by the Engineer-in-Charge. 20.00 Nos 0.00
44 Supplying and fixing 15mm dia CP brass bib cock of approved make fixed with all necessary screws all complete as directed by the Engineer-in-Charge. 10.00 Nos 0.00
45 Supplying & fixing 15mm Push tap with flange for urinals any colour high pressure of PTMTscrewed for iron pipe and fixed, (Minimum weight 15mm-47gms/ 20mm- 75gms) etc complete as directed by Engineer-in-Charge. 25.00 Nos 0.00
46 Supplying and fixing 1000 litres capacity Cylindrical vertical rotational moulded polyethylene water storage tank conforming to I.S.12701 moulded to seam less perfection from FDA approved grade polyethylene including necessary cover, inlet, outlet and scour pipe etc., all complete as directed by the Engineer-in-Charge. 2000.00 Litres 0.00
47 Man hole Cover Supplying, fabricating and fixing Cast iron /MS work grade FG 150, unmachined, in brackets, gully traps, gratings, manhole covers etc complete as directed by Engineer-in-Charge. 100.00 Kgs 0.00
48 Suppying and fixing 15 mm dia fancy type heavy duty CP pillar taps of JAQUAR make for wash basin / outside handwash including fixing to CPVC /GI pipe etc., all complete as directed by Engineer-in-Charge. 20.00 Nos 0.00
Total (Excluding GST) 0.00
Add 18% GST 0.00
Grand Total (Including GST) 0.00
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/R-18/24-25
Name of Work: Renovation of Toilets at various Shops in Engine Division, HAL [BC].
Estimated Amount in Rs.: 2920000
Tender Notice Date : 14.06.2024
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company
2 Type of ownership PlsEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution
4 Address for correspondence: Pls Enter Address
5 (a) PAN No.: Pls Enter Pan NO
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code 3 #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 I.T Returns for past 03 years 999999 5 J 6
2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
9 Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2
2022- 2023 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 876000.00
Avg Annual Turnover criteria is not met 10000000 1
10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed
ESI Registration No/. with proof if any Remarks if any
PF Registration No. with proof if any
11 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal
Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000
Date of Issue 200000 40000
Value in Rs. 200001 150000
Solvency value is NOT as per NIT
13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1168000 500001 250000
Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: Please enter Details for Work No 1 2000000 500000
Completed value of Work in Rs. 2000001 1000000
Date of Commencement of Work 4000000 1000000
Date of Actual Completion of Work: 4000001 2000000
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Pls Enter Details for Work No II
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work: work done
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555
Brief Description of Work: Pls Enter Details for Work No III #REF!
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work:
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Pls Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
15 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
16 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN08.pdf
TENDER_DOCUMENT • 2.59 MB
18Checklist.pdf
TENDER_DOCUMENT • 0.17 MB
18PBF.xlsm
TENDER_DOCUMENT • 0.03 MB
Amendment.pdf
TENDER_DOCUMENT • 0.16 MB
18PB.pdf
TENDER_DOCUMENT • 0.33 MB
18Undertaking.pdf
TENDER_DOCUMENT • 0.55 MB
18PQF.xlsm
TENDER_DOCUMENT • 0.03 MB
18TB.pdf
TENDER_DOCUMENT • 2.57 MB
18PQ.pdf
TENDER_DOCUMENT • 0.21 MB
18ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .