SIRUKALATHUR GSM WORK

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m,disposed earth to be levelled and neatly dressed.

All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20 cm in depth, layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metre and lift upto 1.5 metre.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level.

1:2:4 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering finishing and reinforcement all work upto plinth level.

1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Centring and shuttering including strutting, propping etc. and removal of form for:

Foundation, footings, bases of columns etc for mass concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

Thermo Mehanically Treated Bars

12mm Cement plaster

1:6 (1 cement : 6 fine sand)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm

Supplying and filling in plinth with building rubbish under floors, including watering, ramming, consolidating and dressing all complete.

Steel work in builtup sections/framed work, including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.a) in gratings, frames, guard bar, ladder, railing, btrackets, gates and similar works.

Dismantling the PVC GSM shelter of size 3.15*2.15*3m size including dismembering and stacking without damage for reuse as directed by the Engineer in Charge at site of work within 50m lead.

Assembling the PVC GSM shelter of size 3.15*2.15*3m size with available materials inclduing providing and fixing necessary extra GI corner angle made of GI sheet, fixing rivets, scres and bolt nuts etc as directed by the Engineer in Charge.

Providing and fixing marine grade 19mm thick ply wood for flooring including fixing to the shelter base with necessary screws/ bold nuts etc complete as directed by the Engineer in Charge.

Providing, laying and fixing to the wooden floor PVC sheet flooring (2mm thick) with SR998 or equivalent adhesive as directed by the Engineer in Charge.

Providing and applying to the shelter panel joints and GI sheet wall cladding joints with silicon sealant as directed by the Engineer in Charge.

Providing, laying and fxing to the truss and purlin frame work colour coated GI corrugated roofing sheet of approved quality and make for roofing of shelter and Plain colour coated GI sheet for cladding of shelter walls with selft tapping EPDM gasket fitted screws as directed by the Engineer in Charge.( sheet thickness 0.47mm)

Painting with synthetic enamel paint of approved brand and manufacture of required cololur to give an even shade: a) Two or more coats on new work. For steel steps and side channels.( approx 7sqm area)