Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹36.1 L+₹5.2 L (16.9%)Rejected-Finance BLDG 9 FLAT 130 MIRA CO OP HOUSING SOCIETY LTD SALISBURY PARK GULTEKDI PUNE 411037 | PUNE | PUNE | MAHARASHTRA | 411037 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹36.2 L+₹5.3 L (17.0%)Rejected-Finance B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹37.5 L+₹6.6 L (21.2%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance Not Lowest |
Tender Value
₹42.1 L
EMD Value
₹84,120
Closing Date
28 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN - 54 OF 2023-2024 SPL REPAIR TO BLDG. NO 3 AT MM ROAD (MERCURY HOUSE), SPL REPAIR TO BLDG. NO 1A TARAPORE ROAD AND MW WORKS IN THE AREA OF AGE B/R EAST UNDER GE(NORTH) PUNE
2023_MES_611746_1
GE (N) P/TOKEN - 54 OF 2023-2024
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹84,120
Yes
6 Oct 2023
2 Aug 2023
2 Sept 2023
2 Aug 2023
28 Aug 2023
16 Aug 2023
3 Aug 2023 - 9 Aug 2023
Amount
Material and labour for roof tiles Mangalore pattern interlocking at side joints, laid dry including dismantling single layer Mangalore pattern or similar tiles in roofing and rubbish off the premises complete all as specified and as directed.
- Ditto- all as per serial item No.2.00 here-in-before but except tiles.
Material and labour for ridge or hip tiles to suit Manglore pattern of roofing tiles,bedded and jointed in cement mortar (1:6) etc including dismantling of tile and rubbish off the premises complete all as specified and as directed.
Supply and fix second class hardwood clean sawn tile battens, cross sectional area exc 5 and n.exc 15 Sqcm spaced at 30 cm centres to centres fixed with nails complete incl dismantling of scantling and rubbish off the premises all as specified and as directed. (NOTE:Measurements shall be taken overall including both battens and spaces. Deductions shall be made only for openings exceeding 0.40sqm each).
- Ditto- all as per serial item No 4.00 here-in-before but except batten.
M&L AC Feather Edged 15mm to 20mm thick and fixed with GI screws, complete as approved arch pattern any size and shape including taking down existing boarding complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, aluminium sheeting any gauge or any thickness, as in roof coverings complete all as directed.
Supply and fix 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.
All as per item No 08 above above but plain sheet fix in valley gutter / ridge
Dismantling of old steel of any descripton and at any position complete all as specified and as directed.
M&L for Steel work in round or rectangular tube section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250 quality A) complete all as specified and as directed.
Taking up or down & refixing 15 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as specified and as directed.
Supply and fix 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.
Material and labour for cutting chases in brick wall, not exc. 10cm girth, pinning in for concealed water tubing and making good to facings where required and pointing to cement mortar (1:3) complete all as specified and as directed.
Material and labour for false ceiling with 10mm thick 1800mm x 1200mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of POP with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer including dismantling of existing ceiling of any description and any thickness including grid etc complete all as specified and as directed. (NOTE: POP ceiling to be made in two /three tier design)
M&L for plaster of paris decorative cornices/moulding to the pattern as approved, cross sectional area exceeding 13 Sqcm and not exceeding 25 Sq cm and fixed in decorative pattern including preparation of surfaces and applying two coats of acrylic distemper over a coat of primer matching with the colour of ceiling complete including dismantling of all as specified and as directed.
Supply and fix 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.
Supply and fix brass locks, cupboard, grade 1, 75mm size, 6 levers with duplicate keys with brass key hole complete all as specified and as directed.
S&F Stainless steel butt hinges medium weight 100mm with all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as specified and as directed
S&F in repair floor power door stopper of Stainless steel body and tongue 135 mm anodised with hard drawn steel spring fixed in floor complete all as directed and specified.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed
Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.
Taking down shutters of any description, area not exc.1 sqm each complete all as directed.
Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.
Taking down shutters of any description, area exc.2sqm each complete all as specified and as directed.
Material and labour for second class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .
Supply and fix 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed
Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with tinned tacks or galvanised wire staples complete all as specified and as directed
Supply and fix aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.
Supply and fix aluminium powder coated three track sliding window with two glazed shutters, one 4mm thick float glass ordinary quantity and one shutter of stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing handle, locks, PVC rubber lining etc complete all as specified and as directed. Catlouge numbers of Jindal company or equivalent make as specified. Sections of Jindal company : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.
M&L for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed.
M&L for complete removal of existing treatment on ceiling using steel wire brush, sanding machine, rubbing emery papers etc and washing , rubbing down and stopping of distempered and painted surfaces, complete all as specified and directed.
Preparation of surfaces by applying wall care putty 1 to 1.5 mm thick on walls /ceiling surfaces , filling cracks by crack filler and smoothen the surfaces with using sand paper etc complete all as spd and directed.
M&L for two coats of acrylic distemper over a coat of alkali resistant primer of approved tint on wall surfaces
M&L for two coats of acrylic distemper over a coat of alkali resistant primer of approved tint on ceiling surfaces
M&L for applying two coats of luster paint over a coat of cement primer to wall/ ceiling surfaces complete all as specified and directed.
M&L for preparing surface and applying two coats of acrylic exterior emulsion paint on roof/ wall /floor etc, over a coat of primer complete all as specified and as directed. Note: height of building exceeding 5m
Preparation of old surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc., removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrylic exterior emulsion paint complete all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description over 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of wood surfaces and wood based material new or old of any description and treated with two coats of creosote complete all as specified and directed.
M&L for preparation of new wood and wood based surfaces of any description, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer.
M&L for preparation of old surfaces of wood and wood based material of any description in ceiling/wall /joinery etc over 10cm width or girth and applying one coat of synthetic enamel paint.
M&L for preparation of old surfaces of steel ornamental jafris , staircase , railing and any decorative structure in building etc over 10cm width or girth and applying two coat of aluminium paint etc as specified.
Material and labour for 16 to 18mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Labour only for full round moulding to 18 to 20mm thick granite slab complete all as specified and directed.
Taking down cement plaster on brick/ stone walling including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.
M&L Brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 etc including demolition of brickwork built in cement mortar and rubbish off the premises complete all as specified and directed.
Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M &L for prepration of newly plastered wall surface and applying two coats of acrcylic distemper over a coat of primer complete all as specified and as directed.
M&L for preparing surface and applying two coats of acrylic exterior emulsion paint on new wall surface over a coat of primer complete all as specified and as directed.
M&L for double charged vitrified ceremic tiles 10 mm thick (square/rectangular) polished, area of each tile exc. 0.18 sqm not exceeding 0.36 sqm, in flooring etc , laid over and including screed bed of 15 mm thick cement mortar (1:4) and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade including dismantling existing tiling,if any cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for double charged Vitrified ceremic tiles 10mm thick of approved shade as in vertical surfaces, skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match dark shade over and including screed bed of 10mm thick in + cement mortar 1:3 including , cement mortar bedding (but not backing) including dismantling existing tiling, removing rubbish off the premises complete all as specified and directed.
Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) including dismantling existing tiling complete all as specified and as directed.
M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 including dismantling existing tiling, cement mortar bedding (but not backing), removing rubbish off the premisescomplete all as specified & directed.
M&L for wall cladding tiles 600 x 300 mm x 07 to 08 mm thick as in wall cladding , set and jointed in neat cement pest & pointed in white or coloured cement to match, over and including backing coat of 10 mm th in cement mortar (1:3) including dismantling existing tiling , cement bedding (but not backing ) removing rubbish off the premises complete all as specified and directed.
Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.
Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah to the size and pattern including taking down existing plywood complete all as shown on drawing and as directed.
S & F stainless steel Grade 304 for moduler rack for utensil , basket , racks , garbage box , plate racks etc with 19 mm frame thickness and 13 mm folding thickness with SS bar 5.5 outer side & self bar 4.2 mm with Hitachi soft close sliders / channels etc as specified and approved and directed.
Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.
Material and labour for 0.90mm thick white laminate type 1 with approved adhesive as per manufacturer’s instruction complete all as specified and as directed.
Material and labour for second class hard wood cover fillets, bull nosed, splayed, chamfered or rounded on one edge or face, wrought, secured with fevicol and nails, sectional area exc. 13 Sq.cm but not exc. 25 Sq.cm complete all as specified and as directed.
S&F in repair stainless steel auto close/ hydraulic hinge suitable for shutter of not exc 0.50 sqm area complete all as specified and as directed. Make Prayag Cat No. 5120 or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F in repair stainless steel hinge 50 mm long for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.
S&F in repair 75 mm long stainless steel handles for cupboard shutter fixed with Self Tapping screws complete all as specified and as directed.
S&F External teak wood lipping 6 mm thick for 18/19 mm thick particles board, block board or veneered particle board fixed with nails complete all as specified and as directed.
S&F Piano hinges, mild steel, bright finish or electrogalvanised 30mm width of flaps complete all as specified and as directed.
S&F, Magnetic catches of brass body and striking plate in complete all as specified and as directed.
Material and labour for scrapping out old treated wooden surfaces in floors, staircase etc ,sanding the surfaces using sanding machine, application of pigment and hardener to desired colour and finally applying one or more coats of melamine polish with spray guns, compressor complete till glossy surface is obtained complete all as specified and as directed.
M & L for complete removal of existing paint / treatment on wooden surface of door , windows etc by means of scrapping / paintstripping agent / power sander/ burning and sanding the surface to achieve smooth surface and applying two or more coats of malemine polish till desired finsih is achived including application of hardner and pigment of desired colour all as specified and as directed.
M & L for parking coloured floor tiles of size 300 mm x 300mm, 8 to 10 mm thick and laid with matching coloured cement on top of 20 mm thick Screed bed or bedding layer in cement mortar 1:6 for laying floor finishes including dismantling of existing floor of any specification all specified and directed.
Supply and fix in repair for brackets for drapery/ curtain rod, decorative type, of stainless steel as per sample kept in GE (N) Pune office complete all as specified and as directed.
Supply and fix in repair for decorative head for drapery/ curtain rod 25 mm dia of stainless steel complete all as specified and as directed.
Supply and fix in repair for drapery/ curtain rod of 25mm dia, decorative type, of stainless steel complete all as specified and as directed.
Excavation in trenches n.exc 1.5M wide n.exc 1.5M depth for foundation , etc or for shafts , wells , cesspit , manhole , pier hole , etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard and dense soil. and getting out in hard/dense soil
M & L for cement concrete (1:4:8) type D-2 with 40 mm graded stone aggregate in foundation , filling and mass concrete work complete all as specified and directed.
M & L for Moorum / red bajri filling in floors or pavings , laid in layers n exc 15 cm thick , spread , levelled and rammed including watering complete all as specified and directed.
M & L for Hardcore of Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M & L for 75 mm thick Plain Cement Concrete (1:4:8) , type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed.
M&L for Steel work in round or rectangular tube section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250 quality A) complete all as specified and as directed.
M&L for mild steel framed work such as grill with ornamental & intricate design , grating etc with ends of bars shouldered or rebated or forged into spike framed guard bars barred iron doors, ladders, framed baluster, walk way, railing; frame work, including pintle hinges, stops, hand-made sliding bolts etc,sliding channels for sliding of gate and similar work conforming to Fe 290 Gde-E-165 complete all as specified & as directed.
M & L for designer roof tiles manglore pattern of size 15" x 9" interlocking at side Joints , fixed on steel grid on single layer manglore pattern roofing and rubbish off the premises complete all as specified and directed.
M & L for designer roof tiles as in ridges to match with manglore pattern and interlocking at side Joints , fixed on single layer manglore pattern roofing and rubbish off the premises complete all as specified and directed.
M & L PVC Designer Eaves / weather boarding 18 to 20 mm thick & deisgned edge fixing with self tapping screw 15 mm to 20 mm complete all as specified and directed.
M&L for 4mm thick ACP (aluminium composite panel) wall Panelling, vertical, flat surface including 25 x 25 mm hollow aluminium pipe grid framing fixed in partition / cladding complete including dismantling of existing ACP board in any position complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and as directed.
Removing Excavated soils to a distance not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.
S&F in repairs Overhead shower round shape 100mm single flow (ABS Body Chrome plated with gray face plate) with Rubit cleaning system complete all as specified and as directed. Make- Jaguar Cat No : OHS:- 1989
S&F chromium plated, health faucet 15 mm bore, Cat No ALD-CHR-583 of make Jaguar or equivalent as approved by GE complete all as specified and as directed.
S&F in repair vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and brass CP waste pipe 32 mm dia, pillar tap, cast copper alloy with capstan heads chromii, plated fancy type for 15 mm bore pipe, inlcuding PVC waste pipe and M S brackets complete all as specified and as directed.
S&F vitreous china coloured wash down water closet pan (pedestal pattern) white inlcuding trap, connection to drain (outgoing pipe) and to flushing pipe anti syphonage pipe, inlcuding PVC jet for Pedestal pattern pan including 450/600 mm long PVC connection including PTMT nuts and plastic water closet seat f white in colour, closed pattern with flat bottom and cover and mild steel chromuim plated or aluminised hinging device etc complete all as specified and as directed.
S&F chromiim plated two way bib cock with wall flange 15mm dia Cat No. 7041 of make Jaguar 'QUEEN'S COLLECTION' series or equivalent as approved by GE complete all as specified and as directed.
S&F chromium plated fittings angular stop cock with wall flange 15mm dia Cat No. 7053 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent as approved by GE complete all as specified and as directed.
S&F chromium plated towel rail, Cat No FS 5007103 of make CERA or equivalent as approved by GE complete all as specified and as directed
S&F chromium plated toilet paper holder, Cat No. 7751 of make Jaguar ‘‘QUEEN'S COLLECTION' Series or equivalent as approved by GE complete all as specified and as directed.
S&F chromium plated soap dish, Cat No. 7731 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent as approved by GE complete all as specified and as directed.
S&F chromium plated towel ring ,Cat No. 7721 of make Jaguar ‘QUEEN'S COLLECTION' Series or equivalent as approved by GE all as specified and as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.
S&F 75mm dia PVC (SWR) grade , single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and as directed.
' - Ditto- all as per item No 103 above but 110mm dia
M&L for PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and as directed.
-Ditto- all as per item No 105 but 110mm dia
S&F cast iron Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
M&L PVC ((SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and as directed.
Post construction anti termite treatment (Termiseal) comprising of the following:- (a) Complete all as directed by E-in-C inspection of the building for detecting termite infected area of the building. (b) Removal of mud tubes and spraying diluted pesticides when mud tubes removed. (c) Drilling holes of size 8 to 12 mm dia & 300 mm deep at the junction of wall and floor at not exceeding 300mm centre to centre and entire floor area at not exc 600 mm centre to centre. (d) Injecting diluted (2.1%) emulsion through drilled holes @ 200 to 300 ml per hole. (e) Making good treated holes using chalk and white cement. (f) Cleaning the treated area and site clearance as required. Note :- 1. Chemical shall be used for anti termite treatment imidacloprid 30.5% EC. 2. Area of the building to be treated - exc 250 Sqm and nt exc 275 Sqm. 3. Treatment shall be carried out through authorized applicator/ member of Indian Pest Control Association.
Post construction anti termite treatment (Termiseal) comprising of the following:- (a) Complete inspection of the building for detecting termite infected area of the building. (b) Removal of mud tubes and spraying diluted pesticides when mud tubes removed. (c) Drilling holes of size 8 to 12 mm dia & 300 mm deep at the junction of wall and floor and covering entire floor area at not exc 300 mm centre to centre on both sides of walls and also on floor. (d) Injecting diluted (2.1%) emulsion through drilled holes @ 200 to 300 ml per hole. (e) Making good treated holes using chalk and white cement. (f) Cleaning the treated area and site clearance as required.
Material & labour for grinding and floor polishing for Mirror finish on marble/ Kota stone/ stone work by machine grinding where ever required to give high gloss finish complete all as specified and as directed.
Excavation in Trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/ foundation of Pole / Stays / Pipe etc getting out in soft loose soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Leveling, Watering and Well ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.
Removing Surplus soils to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (40mm graded aggregate) as in Foundation of Poles, Stays, etc. including Formwork (as/if required) complete all as specified and as directed.
Supply & laying LT UG XLPE sheathed PVC insulated screened, PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 Volt grade, cross-sectional area 16 Sqmm 2 core, laid in trenches / on surface of wall / along with Pole in and passing through cable protection corrugated pipe & connecting to OH Lines or switch fuse unit and testing, complete all as specified and as directed. NOTE (i) Earthworks, Corrogatted pipe for cable protection, will be measured and paid under appropriate Items. (ii) Steel cable glands of adequate size , aluminium cable socket/ lugs ( bottle/ plate ) of required size at end termination in panel boards/ DBs , & Mild steel flat clamp of size not less than 30x5mm for securing cable pipe along pole , on wall with nut, bolt, washers etc is deemed to be included in the item rate quoated.
Supply and laying Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 laid in trenches HDPE pipes of size 40 mm, chemical resistance, flexible, tough along with accessories such as coupler and bend, with rubber O ring for electrical applications as in cable protection pipe complete all as specified and as directed.
Supply and fixing LED bollard 9 Watt in round/ rectangular shaped (white/ warm white) victorian design with with in-built LED , opal acrylic diffuser and IP 65 protection including provision of flexible copper conductor cable of suitable size to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Bajaj Cat No- BGBOS 600 9W LED WW, Jaquar cat No LBLD03R108XW, Lucker Cat No LOBSQ60, Philips BCP400 LED09 D CW PSU GR S1
Supply and fixing LED post top lantern LED Post top lantern with die cast aluminium spigot , spun al. powder coated top cover, AL. PDC heat sink, opal PC diffuser and clear acrylic IP 65 for fixing on existing pole including provision of 1.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make - Halonix Cat No- HLPT-02-45-CW , Bajaj cat No HLPT-02-45-CW or Jaquar Cat No - 350.33L10H.NGG , Lucker Cat No LPL440
Supply and fixing Die cast aluminium housing, tempered glass di user, IP54, up-down light outdoor wall light 2x 3 Watt light fitting including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed. Make Jaquar Cat No- LWWL02X203XW
S & F LED flood light luminarie in aluminium high pressure die cast housing with toughened glass cover & lens (IP65 rating), high power LEDs as light source and electronic driver of capacity 50 watts, pre wired, necessary mounting arrangements including provision of 2.5 Sqmm twin core copper conductor cable multi stranded from fitting and other end connected to tapping point of length required and taking down old unserviceable flood Light Fitting fixed at any height form existing location of any description complete all as specified and as directed fitting Make Jaquar Cat No LFLD02S050XW or equvalent in Syska, Philips
Supply and fixing LED Spike Light fitting with die cast aluminium housing with toughened glass suitable for ground mounting ( IP66 rating) high power LEDs as light source and electronic driver of capacity 9 watts, pre wired, necessary mounting arrangements complete all as specified and as directed fitting Make Halonix Cat No HLOSPL-27-09-CW, Bajaj Cat No BGSBL 9W LED WW
Disconnecting terminal ends of main incoming cable, outgoing cables of any size connected to switch fuse units in panel/ Meter box board and setting aside serviceable cables, 3 Phase energy meter, DB Box, MCCB, MCB for reuse or carring to store and Dismantling of existing unserviceable LT Panel board indoor type grounted in floor making good disturbed surfaces of floor for instalation of new indoor panel board in existing place complete all as specified and as directed.
Design, supply, install, test and commissioning weather dust and vermin proof LT cubical panel outdoor, fabricated with 3.mm thick CRCA MS sheet for load bearing members, outdoors and covers and shall be painted with epoxy powder paint by means of electro static gun after regorious pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 250 Amps rating TPN bus bars of high conductivity copper alloy and shall be provided with colour coded heat shrinkable sleeves. The minimum depth of panel shall be 400mm. The panel shall be provided with seperate compartments for each switch gear and measuring instruments, the panel shall include instrumentation such as Ampere meter, volt meter, phase indicating lamps etc for incoming with double stud hinged door , front and rear openable with locking arrangement suitable for , 3 phase, 415 volts, 50 cycles , AC supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 , The panel shall be fixed with angle iron frame made of angles of size 40x40x5 mm embeded 200 mm below ground level in PCC (1:2:4) type B-1 using 20mm graded stone aggregate, 600mm above ground level and comprising the following accessories.
M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including GI strip 32x6 mm as earthing lead by means of bolts, nuts & checknuts and washers of galvanized iron or steel drawn through GI pipe 40 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with precast RCC cover in CC 1:2:4 type B1 with handle , with G.I 20 mm dia medium grade pipe for watering and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion complete all as specified and as directed.
S & F Energy saving new generation environmental friendly long life versatile LED street light in aluminium pressure die cast housing with toughened glass cover (IP66 rating) with high power LEDs as light source and electronic driver of capacity 36watts, pre wired, necessary mounting arrangements and provision of 1.0 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 1.5 metres long GI pipe medium grade bracket of suitable size & shape to light fitting mounting dia, secured and fixed with clamps made out of MS flat iron of size 25mm x 5mm, nuts, bolts etc, taking down old unserviceable fitting from existing postion & carrying to store, making good disturbed surfaces complete all as specified and as directed fitting Make Jaquar Cat No LSRT01S036XW or equvalent in Syska, Philips
Supply and fixing decorative wall Lamp Opal Glass fitting 40 Watt with Chrome Finish including Lamp:G9 Bulb 40W x 1 complete with all accessories prewired all as specified and directed ncluding provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed .Make- Jaquar Cat No KWB-CHR-MB12021341A
Supply and fixing 20/22 Watt Inverter LED Batten with Opal Diffuser, IP20, Battery back-up & Functioning as per Product TDS with intregrated electronic driver, connector block, holder, decorative end caps, LED tube light etc complete with all accessories prewired and mounting PVC rectangular block, including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed.Make Halonix Cat No LED INVERTER BATTEN HLB-08-22-CW-INV or equivalent in Havells, LHEXACP7FNIW020
Supply and fixing decorative ceiling hanging indoor light fixture fitting including Lamp: E-27 9W x 1 complete with all accessories prewired including provision of flexible copper conductor cable of suitable size from ceiling rose to connector and taking down old unserviceable fitting from existing postion for carrying to store, making good disturbed surfaces complete all as specified and as directed all as specified and directed. Make- Jaquar Cat No JNL-BLK-SL1000 , Lucker CAT No- LHL206E27
Supply and fixing 7 Wat, Aluminum white powder coating, bed side light fitting with Adjustable head for better beam and focus complete with all accessories prewired including provision of flexible copper conductor cable of suitable size from ceiling rose to connector complete all as specified and as directed. Make Philips Cat No 31437
Supply anf fixing Recess mounting LED round down lighter, tiltable, adjustable 18 Watt fitting made of PDC Aluminium .IP 20 with high efficient COB LED, all accessories prewired including provision of flexible copper conductor cable of suitable size from ceiling rose to connector complete all as specified and as directed. Make Halonix cat No- HLDLR-27-18-CW, Jaquar Cat No- LERS05R020XW,Lucker Cat No LAGCOB 18
Supply and fixing Die cast aluminium housing, transparent tempered glass di user, IP54 (up-down light) 2 x 3 Watt wall light fitting complete all accessories prewired Make Jaquar Cat No LWWL03X203XW or equivalent in Philips
Supply and fixing Multicolour changable, recess-mounted, white powder-coated CRCA housing with full mounted acrylic di user (2ft x 2ft) 36 Watt fitting complete all accessories prewired complete all as specified and as directedMake Jaquar cat No- LULT01S036XM, Philips ( Smart Glow ), Halonix Cat No- HLFPR22-27-36-CW-WC
Supply and fixing surface panel LED Lights 18 Watt , all accessories prewired complete all as specified and as directed. Make Lucker Cat No LNPSRR18, Bajaj cat No -BGSLO SLEEK SURFACE 18W WH RD
Material and labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty PVC casing caping including all accessories after fixing on surface of walls /ceilings etc with PVC Modular flame retardant surface box of suitable module, with earth dolly, covered with modular white cover plate & frame for accomodating modular switches, sockets, regulators etc including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed for the following One light / wall / exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed
One light point controlled by two, two way switch 6 Amps complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed
One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed
One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm. size
Description all as per 135 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point,16 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed
Supply and fixing Modular Switch - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 6 Amps, Two way, one module complete all as specified and as directed.
Supply and fixing Modular Switch - 16AX 1 Way switch with indicator one module ” complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6 Amps, 5 pin, 2 module, complete all as specified and as directed.
S & F Modular socket outlet multipurpose 6/16 Amps shuttered type, 2 module , complete all as specified and as directed.
Supply and fixing Modular Bell push - 6 Amps, Single pole one way, one module complete all as specified and as directed.
Supply and fixing modular fan step regulator, 120W - 2 module suitable for ( 48" & 56" fans) supply complete all as specified and as directed.
S & F Ceiling rose, 3 phase / PVC / polycarbonate, complete all as specified and as directed
Fixing only for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body obtained serviceable from item No. 75 complete all as specified and as directed.
Supply and fixing, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down carefully existing unserviceable main switch /cutout /DBs, Meter Board Box of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes all as specified and as directed.
S & F sheet metal enclosure MCB DB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
S & F Vertical TPN Distribution Board in sheet metal enclosure double door 4 Way, 415 volts, 50 Hz, suitable for Flush Mounting and surface Mounting & provision for FP MCCB as incomer up to 125 Amps as I/C ( Frame1) and SP/TP MCB's as outgoing (Modules Optium F1+12) , With -100 Amps Copper insulated Busbar assembly for each phase, isolated Neutral bar, 2 Earthbar and Cable ties for cable management, IP 43 - #IK 09 with metal door including necessary cement work and electrical connections complete all as specified and as directed.
Supplied and fixed Four pole MCCB, Thermal Release Range 63-80 Amps, rupturing Breaking Capacity Icu at 415V AC 50Hz. 30 (kA) complete all as specified and as directed
Supplied and fixed sheet metal enclosure MCB DB Prewired TPN 4 way vertical type with 200 Amps rated bus bar 415 Volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed
Supply and fixing MCB tripple pole and neutral rated capacity 63 Amps 415 Volts breaking capacity 10 KA complete all as specified and as directed
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 6.0 Sqmm and one single core 6.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed.. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
S & F submain wiring with 2 single core (FRLS) PVC insulated unsheathed multistranded flexible copper conductor cable, of 4.0 Sqmm and one single core 4.0 Sqmm flame retardent low smoke (FRLS) PVC insulated, unsheathed, multistranded, flexible copper cable as earthing lead , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Two runs of main copper wire, one run of earth wire cable & PVC conduit shall be measured together as one length).
S & F sub main wiring with approved colour coding as per IS with four single core PVC insulated FR-LSH cable with stranded copper conductor of size 10 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire , all as per IS 694/1990 drawn through including concealed PVC conduit and conduit accessories heavy duty ISI marked, providing Copper cable sockets plate/ bottle type of adequate size at termination end of cable point wiring in DBs, switch boards, fittings fixtures all as specified and as directed all as specified and as directed complete all as specified and as directed. Note :- ( Four runs of main copper wire, two run of earth wire cable & PVC conduit shall be measured together as one length).
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 1 module
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 2 module
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 3 module
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 4 module
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 6 module
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 8 module( Vertical)
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 8 module( Horizontal)
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 12 module
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 16 module
Supply and fixing in repairs Flame retardant plastic surface box with sleek and curvy modular white colour plate 18 module
M & L for cutting of existing 25 mm dia GI water tubing in position for alteration or insertion of booster pump complete all as directed
Supply and fix on replacement on-line pressure boosting pump, outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity Head 10 mtrs Flow rate-35 LPM power input 0.1 KW with three opearting position OFF/AUTO/MANNUL ,IP 44 and components of ceramic radial Ball Bearing, copper stator winding, EPDM rubber gasket, Aluminium oxide Shaft, carbon trust Ball Bearing, composit PP30% GF impeller including the integrated flow switch starts or stops the pump when a tapping point is turned on or off including, electrical connections, relaying of pipe lines, GI fittings, and including GI sheet cover complete all as specified and as directed. Make Wilo cat no.PB88,Kirloskar,KSB
Supply and fix on replacement on-line pressure boosting pump, outdoor, weather proof electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia of capacity Head 16 mtrs Flow rate-50 LPM power input 0.2 KW with three opearting position OFF/AUTO/MANNUL ,IP 44 and components of ceramic radial Ball Bearing, copper stator winding, EPDM rubber gasket, Aluminium oxide Shaft, carbon trust Ball Bearing, composit PP30% GF impeller including the integrated flow switch starts or stops the pump when a tapping point is turned on or off including, electrical connections relaying of pipe lines, GI fittings, GI fittings and including GI sheet cover complete all as specified and as directed. Make Wilo cat no. PB 200,Kirloskar,KSB
Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy grade, ivory/ white colour, ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.
M & L for supply and fixing of 20 amp modular starter complete with modular plate all as specified and directed.MakeHavells Coral,anchor Penta,Legrand Myrius
Supply and fix for 25 mm dia gun metal gate valve with iron wheel head screwed both ends, ISI marked, fixed to GI pipe complete all as specified and as directed
Note for Item Ser No- 150 to 159- (i) Fixing in repairs includes cost of taking out unserviceable switch board from position with switchs sockets fanregulators etc after disconnecting wires and fixing new in same place connecting wires of light/ socket points by providing suitable size copper cable socket plate/ bottle type without any extra cost from department . (ii) (ii) Cost of switches, sockets, regulators for fixing in repairs will be measured and paid seperately under respective item of this schedule
Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
Vijay Construction and Company
ANIL CONSTRUCTION CO.
N B ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .