Supplying and laying of paver block along with other allied works at entrance portion of Tina Gate between the Block-I and Block-II of Writers Buildings during the year 2025-26.

Picking up and removing old bituminous layer or sand sealing coat from old black topped surface and cleaning the exposed surface by scraping and stacking the material as directed. (a) By manual means : (iii) Above 100 mm thick.

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (i) With 1:6 cement mortar (b) 20 mm thick plaster

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.

Supplying and laying in the specified pattern of Interlocking Concrete Block {avement (ICBP) with concrete blocks ( with concrete grade as specified as per Table I of IS- 15658: 2006) manufatured in steel mould clamed to a bibrating table by hydraulic pressure ( as per cl. no 6.30 of IRC : SP: 63 92018 ), fromBIS license manufacturee with spacer nib small producting profiles on the vertica face of a paver block used as device for keeping minimum joint gap in between the paving blocks as per Cl No. 3.26 of IS :15658 ) and of specified size and shape with aspect ratio (The ratio of length to thickness of a paver block as per sl no. 3.3 of IS: 15658 ) as per table 2 of IS : 15658 with flexural strength/ breaking load as per Annexure G of IS :15658, on the prepared base course of scpecified CBR as per table 1 of IRC SP 63 (2018) or else as mentioned in design and drawing with cushion of compacted beddding sand of 25-35mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps in between paver blocks with joint filling sand ( the grating of the joint filling sand will be as per clause 6.5.2 of IRC SP 63) and completing the edge with cut blocks as per cl no. 8.7 of IRC SP -63(2018) with proper confinement of bedding and joint fillinf sand, compection, levelling and filling up of the edge gap. 80mm thick