Construction of Community hall at Appanaickenpatti village and panchayat

Construction of Community hall building at Appanaickenpatti village and panchayat

Earth work excavation and depositing on banks with initial lead and lift in gravelly soil stiff clay, hard stiff clay, murram, boulders mixed with gravel as per SS 20-B for foundation.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance, labour charges etc.

Brick work in CM 1:5 mix using country Bricks including cost and conveyance labour charges etc.

Supply and errecting sheet centering of size 90 cm x 60cm 10 G sheet laid over silver oak joist and supported by casurina post of size 10 cm x 13 cm dia spaced at 75 cm center to center etc. complete

For Columns :

For Grade Beam :

For Sill slab :

For Sunshade :

Supply and fabrication of steel for RCC works including cost and conveyance charges etc

RCC 1 :1.5 : 3 mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., complete

Supply & Delivery of UPVC of following size including cost and conveyance of all materials to site and all labour charges etc complete

Main Door (P.NO :108 & 109)

UPVC Window

Towards cost for fixing of UPVC Doors including cost and conveyance of all materials to site and all labour charges etc complete

Towards cost for fixing of UPVC Windows including cost and conveyance of all materials to site and all labour charges etc complete

Supply & Delivery of Grill Gate including cost and conveyance of all materials to site and all labour charges etc complete

Paving the flooring with special type of flooring tiles (Cement based Hydraulically pressed Anti skid tiles (20mm thick) in CM 1:3, including cost and conveyance of all materials to site and all labour charges etc complete

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Paving the Floor with Vitrified tiles in CM 1:3 20mm thick including cost and conveyance of all materials to site and all labour charges etc complete

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Weathering Course with brick jelly lime concrete to 0.075m thick laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with weight of cement including cost and conveyance of all materials to site and all labour charges etc complete

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [ The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got approved by the Executive Engineer before use on work.

Plastering in CM 1:5, 12mm thick including cost and conveyance charges etc.,

Distembering painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Provision for Electrification arrangements

Supplying & Fixing Light point

Supplying & Fixing of Tube Light

Supplying & Fixing Fan Point

Supplying & Fixing Fan

Supplying & Fixing Plug

Supply and run of 2 of 1.5 sq.mm.

EB Meter board

PWD Earthing

Supplying and fixing P.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc.,

Provision for SS Hand rail Arrangements in Ramp & Staircase etc complete

HDPE Sintex tank 1000 litre - 1 No.

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Please Enable Macros to View BoQ information