Widening and Strengthening of 1.50 lanes from Km 1 to 6 (600) (up to Dhikauli Mata Temple) of Erich Kakarwai road in Jhansi district.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.(As per MORTH- 2.3 (201(ii) A)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. (As per MORTH- 3.6+3.17)

Construction of Subgrade and Earthen Shoulders with Material Deposited from Roadway Cutting and excavation from drain and foundation of other structures agraded and compacted to meet requirement of table 300-2. (As per MORTH- 3.06+3.19)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (As per MORTH- 3.18)

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401. (As per MORTH-4.01 B (i))

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. (As per MORTH-4.14 -B)

Providing, laying and spreading of graded stone aggregate (WMM- Stablized) after mixing with water at OMC in mechanical mix plant coarriage of mixed material by tipper to site, laying with 1% OPC cement and 3.5% Emulsinon in uniform single layer on sub base/subgrade and compactiong with the road roller to achive the desire density. (As per MORTH-4.14 A)

Providing and applying tack coat with Bitumen (V.G.-10 Gr.) using Bitumen distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface ( treated with Primer) cleaned with Hydraulic broom as per Technical Specification Clause 503. (As per MORTH-5.2(ii))

Providing and laying dense graded bituminous macadam-II with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. (As per MORTH-5.04 B)

Providing and laying bituminous concrete with 100 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 5.8 SI No. 509 complete in all respects. (As per MORTH-5.05 B)