SUPPLY OF STORES FOR AE CABLE WAY AND OJL

SWR 6MM special service ISI marked Make : Asahi Rope/Usha Martin/Mahadev

SWR 16MM special service ISI marked Make : Asahi Rope/Usha Martin/Mahadev

Trolley (1000x900x600) MM weight max 60 Kg

Traveller made out of 8 mm thick MS Plate with 2 Pulley 5'' dia & with groove for 16 mm dia SWR with nut bolt axial fitted

Bulldog Grip 6MM ISI marked Make : Asahi Rope/Usha Martin

Bulldog Grip 16MM ISI marked Make : Asahi Rope/Usha Martin

Single sheave pully open type Snatch block 5 ton capacity.

PGI Sheet 8' x 3'

Nails 75mm long

ISMB 200 x 100 mm 6 Mtr long will be placed main tower/support pillar/Anchrge pillar and etc Confirming to IS 808 (part-I) 1973. Make.TATA/SAIL/TISCO.

ISMB 200 x 100 mm 3.80 Mtr long will be placed support pillar and etc Confirming to IS 808 (part-I) 1973. Make.TATA/SAIL/TISCO.

ISMB 300 x 300 x 140 mm 2.00 Mtr Long for burried anchrage pillar and etc Confirming to IS 808 (part-I) 1973. Make.TATA/SAIL/TISCO.

ISMC 200mm x 200 mm x 76 mm 2.4 mtr long Main pillar to Main pillar joint chennal confirming .IS 808 (Part-III) 1979.Make.TATA/TISCO/SAIL.

ISMB 200mm x 100 mm x 2.4 mtr long for burried Main pillar To Main pillar joint and etc Confirming to IS 808 (part-I) 1973. Make.TATA/SAIL/TISCO.

ISMB 200mm x 100 mm x 3 mtr long for burried anchrage pillar and etc Confirming to IS 808 (part-I) 1973. Make.TATA/SAIL/TISCO.

Nut bolt 25mm dia x 150 mm long with double washer

MS Plate 300 x 300 x 6 mm thick base plate

Wall Cage made of 8mm steel TOR (Make - SAIL TMT/TATA TMT/JINDAL TMT as per IS 2062/1999 with specification of weight Kg/m being not less than 0.395 Kg. The basket will be of size as under :- (a) Height – 75 cm. (b) Width – 60 cm. (c) Length – 90 cm. The mesh will be of a dimension 15 cm x 15 cm with all four corners of basket hinged with rings made of 10mm TOR, dia 1.25 inch with a total of 20 Rings (5 Nos each corner). Each wall cage to have 04 Nos of clamps. Clamp should consist of two Nos of MS plate of size (LxBxC) 100mmx 40mmx4mm with 2 Nos of holes as mentioned in drawing, 2 Nos of 50mmx8mm full threading nut and bolts as shown in the drawing be provided with the each clamp alongwith the washers with each nut bolt. One coat of red oxide primer to be applied to entire cage surface.

Synthetic enamel paint OG colour for two coat 1st quality Make - Asian Paints ( Apcolite) / Berger (Luxol Hi gloss) / Goodlass Nerolac (Full Gloss).

Red oxide primer for one coat steel surfaces Make - ASIAN / BERGER / NEROLAC.

Painting brush 75mm

Welding Rod

Nylone Rope 20 mm dia

Wrechet Spiner Set ( Make :HIRA)

Adjustable wrench ( Make :HIRA)

Brick Trowel ( Make :HIRA)

Steel Gurmala ( Make :HIRA)

Pan Motor ( Make :HIRA)

Plumbob ( Make :HIRA)

Water tube level 30 mtr long

Brick Hammer

Hammer 8 Kg

Hammer 1.5 Kg

Provn of Water Tank Rotationally Moulded double layer tank of500 ltr capacity conforming to IS : 12701/96 including amendment with moulded closed lid including clamp and locking arrangements. Thickness of all layers should be 3mm. Make : Sintex/Star (ISI Marked).

Cheesel

Crow Bar

MS Angle Iron 65 x 65 x 6 mm thick 6 mtr long

Foundation bolt 16 mm dia 750 mm long.

Binding Wire

TMT bar 12 mm dia as per IS 1732-1989 Make TATA/SAIL

Diesel Engine Assembly Mahendra&Mahendra Model: XD3PE MM ARMY-4500-4 Speed gear box, popular soft,radiater,Battery,Amp meter,ignition switch,fuel tank, base frame,with universal shaft,foundation Bolts,propeller shaft,Air weather pipe, Diesal tank,Diesal supply pipe,Radiator,fuel filter assembly ignition switch self stater assembly on common base frame with complete fitments.

Transmision Assy (4WD) sutable as per load length 250-1500 complete all Assy.and base frame foundation of running trolly 90 kg incl fitted big,small iron wheel incl Drum break pad fitted Assembly.

Genr Set . GE-3P-W 8000 D :Diesel portable Arc Welder cum Generator machine suitable for all types of general purpose structural welding,light & medium welding jobs up to 4 mm Electrode in built For Three phase. As per specification mentioned in Ser 13 of Appx A of RFP

Puller Machine 5000 Kg capacity with aluminium alloy

Chain Saw wood cutter with power source Petrol Make : Hitachi (Asma Cs33eb) with complete acessories having the following specification :- (a) Max chain speed 14 m/s (b) Std guide bar (Bar length)- 40 cm (c) Engine type - 2 stroke (d) Guide bar type - Double guard (e) Displacement - 32.2 cc (f) Chain pitch - 0.375 inch (g) Chain gauge - 1.3 mm (h) Chain speed - 1428 FPM

Iron cutter machine with electric motor Make : BOSCH( GCO 200) having the following specification :- a) Cutting cap at rectangle 0o 100x196 mm b) Cutting cap at square 0o 119x119 mm c) Cutting cap at L-profile 0o 130x130 mm d) No-load speed 3800 RPM e) Saw blade dia meter 355 mm f) Saw blade bore 25.4 mm g) Rated power input 2000W

Tools set for Modular Offr JCOs Living Shelter) following items will be provided with One set of errection Tools :- (a) Drill Machine Heavy Duty. Make: BOSCH.- 01 Nos (b) Drill Bits of following sizes. Make: BOSCH. (i) 3 mm size - 05 Nos (ii) 6 mm size - 05 Nos (iii) 8 mm size - 05 Nos (iv) 10 mm size - 05 Nos (c) Pipe wrench 250 mm length. Make:Taparia- 01 Nos. (d) Hacksaw blade with frame. Make: Taparia - 01 Nos (e) Wooden planer for mason 1.20 mtr length-01 Nos (f) Screw driver, blade length 300 mm, blade dia 6 mm Make : TAPARIA. - 02 Nos (g) Brick Trowel - 01 Nos (h) Brick Hammer 1 Kg - 01 Nos (j) Parthal wooden planks for shuttering 3.65 x 0.30 x 0.025 mtr. - 04 Nos (k) Spanner suitable for nut bolt - 02 Nos (l) Tile cutter Blade - 05 Nos (FOR Rajouri)

GLOBAL ENGINEERING ENTERPRISES

M/s Bharat General Store

M/s Batta Industries

ASIA ELECTRONICS

A R AGENCIES

A R AGENCIES

M/s Bharat General Store

GLOBAL ENGINEERING ENTERPRISES

SUNIL STEEL INDUSTRY

M/s Batta Industries