Repair and maintenance of Katwar Pump House.

Amount

Scraping Cement plaster (HSR item No. 8.32c)

Removing window Door with Chowkets together with the dismantling of wall. (HSR item No. 8.17)

Removing window Door with Chowkets together with the dismantling of wall. (HSR item No. 8.17)

12 mm thick cement plaster 1:3(HSR item No. 15.4)

Conglomerate floor with 40mm thick cement concrete over 100mm thick cc 1:8:16 on 100mm thick sand or stone filling. HSR item No. 14.12.

Cement concrete 1:1 ½:3 with stone aggregate 20mm nominal size in first storey upto 4 metres above plinth level. HSR item No. 10.60.

Pressed steel sheet frames (Chowkats), consisting of 2mm Thick steel sheet of the specified Section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. Specifications, including bolts for fixing Stops, lock Notch, provision for receiving Tower bolts, and finished with one coat of coat of ready mixed, paint read lead Non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3: for lugs Complete:- Door and window frame size 127mm x 50mm with 40mm wide double rebate (HSR item No. 18.34)

Providing and fixing hard drawn steel wire fabric 75mm X 25mm rectangular mesh with 3.25 mm dia wire fixed on steel windows of standard rolled sections with 3mm thick iron cover moulding of 12.5mm width fixed with machine screws welded complete in all respect (HSR item No. 18.33)

Supplying openable steel doors and windows, of standard steel sections, joints mitres electrically flash welded including provision for arrangement of receiving handles, peg stay, catcher will also be welded with the frame and providing and fixing pressed steel projected hinges, iron lugs, glazing clips (excluding wooden shutters, glazing and fittings such as handles, peg stay and catched etc.) and finished with one coat of ready mixed red lead no setting primer(HSR item No. 18.24)

Supply & fixing glass panes with teak wood molding HSR item No. 17.42

Supplying and fixing rolling shutters of approved make M.S. laths, interlocked together through their entire length, and jointed together, the end, by end locks mounted on specially designed pipe shaft, with brackets, side guides 27.5 cm long wire spring grade no. 2 and arrangement for inside and out-side locking with push and pull operation complete, including top cover 0.80 mm thick (payment is to be made for the exact size of opening where rolling shutter is to be fixed):- (HSR 18.18 b)

Applying priming coat with metal primer on New steel or iron work including preparation of surface (HSR item no. 16.9)

Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work (HSR item No. 16.17)

Painting one coat with plastic emulsion paint on walls on old work to give an even shade (HSR item No. 16.31)

White washing Two coats (HSR item No. 16.47)

AJAY AHLAWAT