Karnataka

Active

Works

Buildings

Construction of Connecting Bridge from Cauvery Bhavana Building to Car Parking building and Interior works for Car parking building at Cauvery Bhavana, Bengaluru

Karnataka Housing Board

KHB Central Office Bengaluru | BENGALURU, Karnataka

Amount: Refer DocsCloses: 30 Jun 20266d left

Tender Value

Refer Docs

EMD Value

₹2.9 L

Closing Date

30 Jun 2026, 9:30 pm6d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Karnataka Housing Board

Work Description

Construction of Connecting Bridge from Cauvery Bhavana Building to Car Parking building and Interior works for Car parking building at Cauvery Bhavana, Bengaluru

Tender Information

Tender ID

307149

Reference Number

KHB/2026-27/BD/WORK_INDENT761

Tender Type

Open

Product Category

Buildings

Location

KHB Central Office Bengaluru

Source Website

Subscribe to view

Documents Required

13 documents required · 12 mandatory · 1 optional

Technical Bid

RequiredAnnual Turnover Certificate

RequiredCompany Registration Certificate

OptionalSmall Scale Industries Certificate

RequiredWork done certificate

Requiredkey and critical equipment LIST

RequiredIncome Tax returns & PAN no.

RequiredPre-qualification certificate issued by KHB

RequiredGST clearance certificate

RequiredCredit lines/ letter of credit/Bankers certificate

RequiredAssessed available tender capacity calculation

RequiredElectrical license

RequiredWork done certificate with quantities

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tender document is part and parcel of the agreement.

The contractor shall obtain insurance coverage for all the workers deployed for this work.

Further details of the work or any clarifications can be obtained from the office of the Executive Engineer (Central office), KHB, Cauvery Bhavan, K.G. Road, Bangalore Ph: 080-22273511 ext-317,

The intending bidders are requested to note that they should abide by the detailed instructions and conditions contained in the Tender documents and further modifications done if any.

Corrigendum/modification/corrections, if any, will be published in the kpp procurement Web sites only.

KHB reserves the right to withdraw or cancel this invitation to BID/Tender without assigning any reason whatsoever

The bidder shall study the Tender document Carefully and quote the rates

All scanned documents to be uploaded shall be in original and are to be produced to the Executive Engineer to verify the documents within 3 days from the day of opening of Technical bid for verification, if required.

Drawings uploaded are only for Tender Purpose only.

GST shall be added separately in the estimate.

GST shall be paid to the tendered amount separately.

The bidder should maintain register of laborers deployed and wages paid for the workers and shall produce the documents whenever called for by the competent authority. Remittance towards PF shall be commensurate with the labour component of the work involved.

The bidder shall give an undertaking that they would abide by the provisions of employees provident fund and shall remit PF of labourers to the respective PF offices or else KHB have the right to deduct the PF amount from the work bills and remit the same to respective PF offices.

The contractor shall quote his rates inclusive of PF as per the applicable rate as issued by the PF department from time to time

The successful bidder shall give an under taking that they would abide by the provisions of the Employees Provident Fund Act.

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Capabilities of Vendor

Covering letter.

Others -- Covering letter.

Scanned Copy of documentary proof for having executed similar nature of work not less than 50% of tender amount

Work Done Certificate

Scanned copy of latest GST clearance certificate.

Others -- Scanned copy of latest GST clearance certificate.

Scanned copy of Pre-qualification letter issued by Karnataka Housing Board.

Others -- Scanned copy of Pre-qualification letter issued by Karnataka Housing Board.

As per Tender Documents KW-4 clause 3.3 key & critical equipments available.

Others -- As per Tender Documents KW-4 clause 3.3 key & critical equipments available.

Executed in any one Financial year, the minimum quantities of work as mentioned in tender document

Others -- Executed in any one Financial year, the minimum quantities of work as mentioned in tender document

Required valid electrical license for executing similar nature of work as per tender document

Others -- Required valid electrical license for executing similar nature of work as per tender document

The Tenderer should have executed similar water supply/sanitary engineering works as per tender document

Others -- The Tenderer should have executed similar water supply/sanitary engineering works as per tender document

Financial Status

Income Tax returns & PAN

ITR Filed Copy (Mentioning PAN)

GST Registration Certificate

GST Registration

To qualify for award of this contract , each tenderer in its name should have in the last five years achieved in at least two financial years a minimum financial turnover (In all classes of civil engineering construction works only)

Audited CA Certificate of Annual Turnover

Scanned copy of Credit lines/ letter of credit /Bankers certificate for at least 20% of amount put to tender in the current financial year on the name of work put to tender.

Line of Credit

Assessed Available Bid Capacity as per tender document

Others -- Assessed Available Bid Capacity as per tender document

Fee & Financial Details

Tender Fee Amount

₹4,840

EMD Fee Amount

₹2.9 L

Important Dates

Last Activity

17 Jun 2026

Published

17 Jun 2026

Bid Opening

2 Jul 2026

Download Ends

23 Jun 2026

Pre-Bid Meeting

24 Jun 2026

BOQ Preview

•

Construction of Connecting Bridge from Cauvery Bhavana Building to Car Parking building and Interior works for Car parking building at Cauvery Bhavana, Bengaluru

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum & Cost of Haulage Excluding Loading and Unloading Taking output 10 t load and lead 40 km = 100 t.km (135+12x40x1.35)

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Providing and fixing roofing consist of 0.8 mm thick Galvanized steel Deck Sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including ed...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Polyurethane based Single Component for New Surface---Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrac...

•

Furniture Works : SF 5 - Providing & fabricating THREE SEATER SOFA in Solid wood frame work with 150mm thick foam backing for seat & back rest clad with two layers of 12mm thick foam of approved make...

•

SF2 :Providing & fabricating TWO SEATER SOFA in Solid wood frame work with 150mm thick foam backing for seat & back rest clad with two layers of 12mm thick foam of approved make clad with 2mm thick ...

•

SIDE TABLE: Providing & fabricating centre table of size 500mm X 500mm formed out of 19mm thick commercial ply finished in 4mm thick approved veneer with edge lipping finished in melamine polished. T...

•

Coffee Table 1 : Supplying & Installing Solid Wood Coffee Table of of Size 900 mm x 550 mm and height 425 mm and top comprising of solid wood Top with Provincial teak Finish polish and as per the deta...

•

Table T5A:Providing L-shaped workstation comprising of a table Top made of 25mm pre-laminated particle board(PLPB), supported with 25mm pre-laminated MDF leg. b). Side credenza comprising of 2 Drawer...

•

Chair C4 Providing & supplying seat assembly Center Pivot Mechanism,360 degree swivel, 17 degree tilt, tilt tension adjustment, upright locking, Pneumatic height adjustment.to be made up of 1.2 +/-0....

•

Storage S2 Providing & supplying storage made of 25mm thk and 18mm thk Pre-Laminated boards with metal cladding of 0.8mm thk C.R.C.A (as per IS:513) from outside. Side metal cladding is coated with ...

•

Cafe Table T2 :Providing & supplying cafe table with 19mm thk Granite Top with Half round Around, supported on a Disc Base in 16 guage SS Frame. All edges are Finished with Half round for top Granite ...

•

Cafe chair C2 : Providing & supplying cafe chair made of Metal with powdercoating in colours as per architect's approval. Colours: Yellow, White

•

C5 Providing & supplying of stackable chair in which seat & back is made up of specially blended Nylon 6 with 15% GF (Glass Filled) Nylon. The frame of the chair will be made up of high strength mild ...

•

Double sided Book rack R1b Providing & supplying Double Sided Book rack with Double Sided Open Shelving unit assembled from Post of 2100 mm H made in 2mm thick 70x30 mm tube punch with the following:

•

Bay-end panels:2100mm height for Library racks R1b(Double sided): Providing and fixing Bay end panels made up of 8 cylinder pressed Medium density Fiber Board (MDF) of 25mm thickness consisting of2 al...

•

Pantry Counter - M6 : Providing & fixing Pantry Counter with 19mm thick MR plywood for main frame & shutters with 19mm thk MR ply with SS auto closing hinges of 35mm cup diameter, 12mm thick ply backi...

•

Reception Desk - M1 :Providing & fixing reception table made of 19mm thick MR plywood carcass with 75mm ply skirting. The counter top and front upto 1100mm shall be finished in 12mm thick solid acryl...

•

Refrigerator: -Supplying & Installing of Refrigerator of Capacity 394 L: Digital Inverter Compressor: Consumes lower electricity in comparison to a Normal compressor

•

Type: Double Door

•

Refrigerator Typ...

•

Storage S6 : Providing and supplying Compactor storage consisting of storage units (381 mm deep & 457 mm deep fixed or movable bolted to Undercarriage which rolls onto the channels, which, are firmly...

•

Providing & fixing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced w...

•

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @...

•

INTERNAL WIRING : Point wiring using Copper wire without Switch. Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand...

•

Point wiring using Copper wire without Switch. Supplying and wiring adopting loop system in existing pvc conduit/casing caping using 1100v grade,COPPER conducter flexible multistrand FRLS PVC insulate...

•

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4 Module

•

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6 Module

•

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8 Module

•

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 10-12 Module

•

Supplying and flush mounting powder coated metal box suitable for mounting modular switch plates.The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 16-18 Module

•

Suppling and fixing PVC/metal conduit deep juction boxes 19/20mm deep juction box

•

Suppling and fixing PVC/metal conduit deep juction boxes 25mm deep juction box

•

Suppling and fixing PVC/metal conduit deep juction boxes 32mm deep juction box

•

Suplay and fixing Metal Fan Box with Round Hook

•

Supplying and mounting 2 nos of 2 way 6amps flush type switches either surface /flush mounted on exisinting gang box or in 4mm thick plastic sheet and mounted on a flush mounted wooden box and wiring ...

•

Supplying and fixing superior gality modular switch mounting polycorbonate plate with neceaary supporting back plate with rquired nos. of machine screwes, bolts nuts etc., complete on the existing met...

•

Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 6A mps one way

•

Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 6A mps Two way

•

Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 6A mps 3way socket.

•

Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 16Amps one way switch

•

Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. 6/16Amps univeral socket

•

Supplying and fixing of modular switch/Socket/stepped electeonic fan regulator/ dimmer/telephone socket etc on existing modular switch plate. TV/Telephone socket

•

Supplying and fixing of bakelite DP/Socket/switch with/without neon indicator over excisting wood board or flush mounting in plastic /nitchesMOUNTING/telephone socket etc on existing modular switch pl...

•

Concealed Conduit System: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… and running before concreting th es...

•

Groove cutting: Supplying …. Mm dia 2mm2.5mm Thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc… by groove cutting in the wall and fixing by...

•

Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 1.5 sqmm

•

Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 2.5 sqmm

•

Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 4 sqmm

•

Wiring for lighting /power circuit using one of PVC insulated 1100v grade,multis and Copper conductor single core cable in open or consealed system of wiring. 6 sqmm

•

Supplying and fixing regular MCB distribution boards on wall/ woodboard /flush mounting required clamps,bolts,nuts etc.. with provision for fixing suitable type capacity MCB's single phase /3 phase /s...

•

Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. )32-40 Amps 2 Pole

•

Supplying and fixing and wiring Earth Leakage Miniature Circuit Breaker [RCCB] 240/450V up 300mA sensitivity on exsiting wood/panel board. 32-40 Amps 4 Pole

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 6-32Amps SP

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. )6-32Amps DP

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 40Amps DP

•

Supplying, fixing, wiring, earth electrode for grounding

•

conduits, I.C. cutouts and other equipment's on the meter

•

board using 40mm dia 2.90mm thick GI pipe 2.5 mtr

•

long buried in a pit … The pit sh...

•

Supplying fixing and wiring earth electrode for grounding

•

of lifts, transformers, DG sets etc. using 40mm dia 2.9mm

•

thick 2.5 mtr long GI pipe with GI funnel with mesh and

•

suitable size reducer fixed ...

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 8SWG copper wire

•

Supplying of 2 feet LED PVC square batten with high quality diffuser with ife of 25000 burninng hours & 70% lumen maintance with CRIGreater than80. power input :220-240V @ 50 hz & power factor Great...

•

Supplying of recess/Surface mounting non integrated type LED down light ...... W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Po...

•

Supplying exhaust fan of 1440 RPM of 300 mm (12'') size with bracket blades complete for light duty suitable for operate of 230V 50Hz, AC Supply..

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bai...

•

Fixing all types and all capacities of fluorescent / fales ceiling /spot light /CFL / LED fittings indoor on the wall /ceiling / refters / girders using 23/0.0076" twin twisted PVC insulated wires, re...

•

Fixing a ceiling / wall mounting fan of all capacities and all types to the existing 's' hook with fan regulator to the existing board together with supplying and fixiting 5amps . Ceiling rose, necess...

•

Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class 4 core 10 sqmm

•

Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class 3.5 core 70sqmm

•

Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 10 sqmm

•

Supplying tinnd copper lugs and crimping and wiring to terminal point for wire of the following sizes 70 sqmm Long Barrel

•

Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 25 mm dia

•

Supplying and fixingof heavy duty cable glands suitable or UG cable o 1.1KV class (metal only) 45 mm dia

•

77.22) Supply & fixing of Caution/Danger name board as per drawing( BESCOM SR . CDS-1)

•

57.09) PVC pipe-100mm dia (Page No 20of 40 Sl no:452)

•

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...

•

Supplying of on load change over switches 4 poles,AC 23A 125Amps

•

Supplying,fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based,digital readout of percentage leakage curren...

•

Supplying, fixing and wiring 50/5A to 400/5A 5VA Burden class 1 Current Transformer.

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 50-63Amps TPN

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 50-63Amps DP

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required. 6-32Amps DP

•

Supplying,fixing and Fixing of Shunt trip suitable for MCCB. CBCT

•

Supplying …..amps rated 3phase with netural bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve,mounted on phenolic/ERP/DMC insulator whic...

•

Fabricating supplying and mounting MS box made out 16 SWG suitable for floor/wall mounting,fully weather proof with provision for better heat dissipation, provided with hinged front cover,equipped wit...

•

Supplying and fixing angle iron frame work fabricated out of M.S ange iron..and M.S.flat ….with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint. 50x50x...

•

Supplying,fixing and wiring rotary selector switch suitable for voltmeter/ammeter

•

Supplying,fixing and wiring 3 Phase Digital Ammeter/Voltmeter

•

Supplying and fixing of LED type pannel board indicating lamp with reqired colour suitable for 220v A.C.50 Hz 12/24v D.C.

•

Providing and fixing CP. Health faucet with flexible hose, CP Bibcock with 2 in 1 connectivity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange compl...

•

Providing and fixing in position CP towel ring with pair of fixing screws and fixing material complete. Make: Jaquar / equivalent.--- Approved at Raichur university

•

Providing and fixing in position 15mm CP angle cock with flange of approved make etc complete as per direction of egineer incharge. Approved rate at BASE University-Hostel Block- Sl no:88 Page no:34 ...

•

Supplying & fixing suction Y'/ pot strainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 50 mm dia. Approved make & model as per the specification. Approved ...

•

Supplying Installing, testing and commissioning of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia complete (PWD SR 2015-16 P.No. 350 I.No. 40.89)

•

40mm dia pipes, From wash basin waste lines-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes ...

•

50mm dia pipes, From sink & urinal waste lines-Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threade...

•

75mm nominal dia pipes -Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement,

•

trenching, refilling & testing of joint...

•

110mm nominal dia pipes -Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement,

•

trenching, refilling & tes...

•

Providing and fixing PVC (S.W.R) Multi Floor Trap 10.0 cm X 7.5 cm X 5.0 cm X 4.0 cm with all fitting arrangements & all necessary accessories complete

•

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

•

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

•

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and makin...

•

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

•

Providing and fixing brass bib cock of approved quality 15 mm nominal bore

•

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality& make and as per the direction of Engineer-in-charge.

•

Providing and fixing unplasticised PVC connection pipe with brass unions :(30 cm length 15

•

mm nominal bore)

•

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, eTFective

•

length of tail pipe 260 mm from the centre of the wa...

•

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 g

•

WATER SUPPLY-15 mm nominal dia Pipes-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded f...

•

20 mm nominal dia Pipes-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c ...

•

25 mm nominal dia pipes-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c ...

•

32 mm nominal dia pipes-Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c ...

•

Air Vent Cowel 75mm

•

Air Vent Cowel 110mm

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

NIT Connecting Bridge Interior works Car Parking.docx

Others - NIT • 1.57 MB

Section-7-Specification.docx

Instructions to Tenderers • 0.39 MB

Connecting Bridge.pdf

Others - DRAWINGS • 0.43 MB

kw-4 Connecting Bridge Car Parking.docx

Tender Document • 1.66 MB

Ready to Participate?

Download all tender documents and submit your bid