REPAIR REPLACEMENT OF INTERNAL AND EXTERNAL ELECTRIC SUPPLY INCLUDING ALL LT EQUIPMENT STREET LIGHT SECURITY LIGHT GATE LIGHT WALL SECURITY LIGHT DG SETS AND ALIED EM WORKS FOR TRISUL HOUSE STAFF QTR SPORTS COMPLEX WAC BUNGLOWS MAP ACCN AND ARJAN PAT

Amount

Taking down carefully the existing point wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators, call bell and light fittings etc by unscrewing and removing from site complete all as specified and as directed by Eng-in-charge. Note : Cost of unserviceable materials will be charged from the contractor against schedule of credit.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor,FRLS 1100 Volts grade, with non metalic rigid PVC medium grade duty conduit/casing capping on wall/roof for surfacing wiring but not less than 20mm dia with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc with 3 mm thick plastic laminated sheet top cover Make : Hylem / Anchor including continuous earth wire PVC insulated 1.50 Sq mm multi stranded copper conductor, FRLS 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for One light /bell/fan point controlled by one 1 way switch complete all as specified and as directed by Eng-in-charge.

All as per Item No. 2 above but One three pin switch socket 5 Amps plug point on independent board complete all as specified and as directed by Eng-in-charge.

All as per Item No. 2 above but One three pin switch socket 5 Amps plug point on same board complete all as specified and as directed by Eng-in-charge.

All as per Item No. 2 above but One bell/buzzer point controlled by one bell push on independent board complete all as specified and as directed by Eng-in-charge.

All as per Item No. 2 above but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size including continuous earth wire PVC insulated 1.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Eng-in-charge.

All as per item No. 2 above but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Eng-in-charge.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC sheathed FRLS cable, 1100 volts grade IS-694 marked, with multi strandad copper conductors and earth continuity wire with similar 1.5 sqmm cable (incl connecting to earth dolly) concealed in wall including PVC conduit size of not less than 20mm and fittings/accessories all fixed to the surface of walls/ceiling, and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following :- (Note : Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.) One light /bell/fan point controlled by one 1 way switch complete all as specified and as directed by Eng-in-charge.

All as per item No. 8 above but One socket out let 5 Amps 5 pin on independent board complete all as specified and as directed by Eng-in-charge.

All as per item No. 8 above but One socket outlet 5 Amps 5 Pin on same board with other switches complete all as specified and as directed by Eng-in-charge.

All as per item No. 8 above but One bell/buzzer point controlled by one bell push on independent board complete all as specified and as directed by Eng-in-charge.

All as per item No. 8 above but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Eng-in-charge.

All as per item No. 8 above but point wiring with 4 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps switch including continuous earth wire PVC insulated 4 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by Eng-in-charge.

Supply and fix Switch Piano, Flush Button, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed by Eng-in-charge. Make : Havells / Anchor / Cona

S&F switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC complete all as specified and as directed by Eng-in-charge. Make : Havells / Anchor / Cona

S&F socket outlet 2in1, 3 pin 5 Amps flush type suitable for 240V AC complete all as specified and as directed by Eng-in-charge. Make : Havells / Anchor / Cona

S&F socket outlet 2in1, 3 pin 15/5 Amps flush type suitable for 240V AC complete all as specified and as directed by Eng-in-charge. Make : Havells / Anchor / Cona

Supply and fix ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark complete all as specified and as directed by Eng-in-charge. MAKE : ANCHAR / LISHA / Havells

Supply and fix lamp holder PVC/Poly Carbonate type suitable for batten fittings with ISI mark complete all as specified and as directed by Eng-in-charge. MAKE : ANCHAR / LISHA / Havells.

S&F Bell push flush type 5 Amps complete all as specified and as directed by Eng-in-charge. Make : ANCHAR / LISHA / Havells

S&F steped type electronic fan regulator heavy duty flush type socket size on th existing phenolic laminated sheet complete all as specified and as directed by Eng-in-charge. Make : ANCHAR / LISHA / Havells

S&F call bell, Ding dong type, suitable for 240V AC complete all as specified and as directed by Eng-in-charge. Make : ANCHAR / LISHA / Havells

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 3000/6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and as directed by the Engineer- In- Charge. Make: Halonix Cat No -HLB-03-20-CW-AL / Philips / Crompton

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and as directed by the Engineer-In- Charge. Make : Halonix Cat No -HLB-03-10-CW-AL / Philips / Crompton.

Supply and fixing MOD ROUND-SURFACE mounting LED ultra slim round down lighter made of PDC AL with high efficient LEDs & Glare free opal diffuser IP20, 9 watt, 6500/3000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and as directed by the Engineer-In- Charge. Make : Halonix Cat No-HLDLS-R06-09-CW / Philips / Crompton.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, 2700/6000K,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and as directed by the Engineer-In- Charge. Make : Halonix Cat No- HLBH-02-10-CW / Philips / Crompton Greaves.

Supply and fixing LED cabinet light fittings, 3 watt, 3000/6500K,, 230 Volts, (SMD Type) complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and as directed by the Engineer-In- Charge. Make : SYSKA Cat No SSK-SM-R-3W / Philips / Crompton Greaves.

Supply and fixing wall/ceiling mounted LED Bush light fittings with die cast aluminium housing with toughened glass. IP66 , 3/6 watt, 2700/6000K,, 230 Volts, diffused optics ,etc complete with all accessories complete all as specified and as directed by Eng-in-charge. Make : Halonix Cat No- HLOBUL-02-03-CW / Philips / Crompton.

Supply and fix in replacement of ceiling light with 9 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and as directed by engineer-in-charge. Make : Polycab Cat No LD00125031 or its equivalent in Philips / CG.

Supply and fix ceiling light with 18 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and as directed by engineer-in-charge. Make : Polycab Cat No LD00125037 or its equivalent in Philips / CG.

Supply and fix ceiling light with 24 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and as directed by engineer-in-charge. Make : Polycab Cat No LD00125039 or its equivalent in Philips / CG.

Supply and fixing LED Panel lights - Quadra Series , 36 watt, 6000K,, 230 Volts, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and as directed by the Engineer-In- Charge. Make : SYSKA Cat No SSK-TVP-6060-36W / Philips / Crompton Greaves.

S & F 10 watt LED focus light decorative type light fitting fixed on wall with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting complete all as specified and as directed by engineer-in- charge.

S&F in replacement fan capacitor 2.5 Mfd complete all as specified and as directed by Eng-in-charge. Make : Epcos / Usha / Asian / Havells

S&F in replacement fan capacitor 3.15 Mfd complete all as specified and as directed by Eng-in-charge. Make : Epcos / Usha / Asian / Havells

Supply & fix in replacement metal clad socket single pole and neutral sheet metal enclosure with and 20A earth plug and socket complete with one single pole MCB 20 amp 240 Volts complete all as specified and as directed by Eng-in-charge. Make : Leagrand / Havells / Anchor / L&T.

Supply & fix in replacement metal clad socket three pole and neutral sheet metal enclosure with and 32A earth plug and socket complete with one three pole MCB 32 amp 415 Volts complete all as specified and as directed by Eng-in-charge. Make : Leagrand / Havells / C&S / L&T.

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 240 Volts, 2 way concealed in wall such as front cover shall be seen flush with the wall surface complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / Legrand

All as per item No. 38 above but 4 way complete all as specified and as directed by Eng-in-charge.

All as per item No. 38 above but 8 way complete all as specified and as directed by Eng-in-charge.

All as per item No. 38 above but 12 way complete all as specified and as directed by Eng-in-charge.

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts, 4 way concealed in wall such as front cover shall be seen flush with the wall surface complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / Legrand

All as per item No. 42 above but 8 way complete all as specified and as directed by Eng-in-charge.

All as per item No. 42 above but 12 way complete all as specified and as directed by Eng-in-charge.

S&F in repairs MCB Triple pole and neutral 63/100 Amps working on 415 volts 50 Hz AC supply,10 KA C series complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / C&S / Legrand

S&F in repairs MCB single pole and neutral 32/40 Amps working on 240 volts 50 Hz AC supply,10 KA C series including taking out old one complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / C&S / Legrand

S&F in repairs MCB single pole 6 to 32 Amps working on 240 volts 50 Hz AC supply,10 KA C series complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / C&S / Legrand

S& F in replacement sub main wiring with two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with continuous earthing wire but in green colour complete on surface/concealed and connected to common earth dolly of the following size complete all as specified and as directed by Eng-in-charge.. Note : Three run of PVC cable and one run of PVC conduit shall be measured as one unit length.

4 Sqmm ( 2 single run of 4 Sqmm and one run of 4 Sqmm as earth wire) complete all as specified and as directed by Eng-in-charge.

6 Sq.mm ( 2 single run of 6 Sqmm and one run of 6 Sqmm as earth wire) complete all as specified and as directed by Eng-in-charge.

10 Sq.mm ( 2 single run of 10 Sqmm and one run of 10 Sqmm as earth wire) complete all as specified and as directed by Eng-in-charge.

4 Sq.mm ( 4 single run of 4 Sqmm and one run of 4 Sqmm as earth wire) complete all as specified and as directed by Eng-in-charge.

6 Sq.mm ( 4 single run of 6 Sqmm and one run of 6 Sqmm as earth wire) complete all as specified and as directed by Eng-in-charge.

Supply and fix in replacement LED Candle Bulb 03 watt Pin type W/W complete all as specified and as directed by Eng-in-charge. Make : Cat part No-SSK-PAC-3W of SYSKA / Havells / Wipro

Supply and fix in replacement LED Bulb 07/09 watt thread type 3000k/6500k complete all as specified and as directed by Eng-in-charge. Make : SYSKA / Havells / Wipro

Supply and fix in replacement LED Bulb 07/09 watt pin type Warm white complete all as specified and as directed by Eng-in-charge. Make : SYSKA / Havells / Wipro

S&F in replacement modular Switch, 5/6 Amps , 1 module complete all as specified and as directed by Eng-in-charge. Make : Crabtree / Legrand / Havells

S&F in replacement modular Switch, 5/6 Amps , 1 module,two way complete all as specified and as directed by Eng-in-charge. Make : Crabtree / Legrand / Havells

S&F in replacement modular socket outlet , 6 Amp, 2/3 pin combined, 2 module complete all as specified and as directed by Eng-in-charge. Make : Crabtree / Legrand / Havells

S&F in replacement modular Switch, 16 Amps , 1 module complete all as specified and as directed by Eng-in-charge. Make : Crabtree / Legrand / Havells

S&F in replacement modular socket outlet , 6/16 Amp, 2/3 pin combined, 2 module complete all as specified and as directed by Eng-in-charge. Make : Crabtree / Legrand / Havells

S&F in repairs modular white cover plate with frame 1 module complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 3 module complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 4 module complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 8 module complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular metal flush box frame 1/2 module complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular metal flush box frame 3 module complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular metal flush box frame 4 module complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular metal flush box frame 8 module complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

S&F in repairs fan regulator 120W,-2 module modular type complete all as specified and as directed by Eng-in-charge. Make : Roma / MK / Legrand

Supply and fixing in replacement PVC gang box suitable for one switch 5 Amps with screw and necessary arrangement complete all as specified and as directed by Engineer in Charge.

All as per srl item No. 66 above but for one 15 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

M & L for rigid non metalic PVC medium grade conduit in repairs including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia.ISI Marked complete all as specified and as directed by Engineer-in-charge.

M & L for PVC casing caping medium grade including, tee, bends, elbows, ends,fixing all accessories etc for 20 mm . ISI Marked complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for foundation of pole/stay/cable etc and getting in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Returning refiling including spreading, leveling, watering and well raming in layers each not exceeding 25 cm thickness complete all as specified and as directed by Engineer-in-charge.

Removing surplus spoil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engineer-in-charge.

Sand cushioning for under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable complete all as specified and as directed by Eng-in-charge.

Supply and lay well burnt as class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench complete all as specified and as directed by Eng-in-charge.

Supply and laying GI tubing light grade of size 80 mm dia with all fitting for protecting the cables in tranches,floors,on poles,in walls complete all as specified and as directed by Eng-in-charge.

All as per item No. 75 above but with size 40 mm dia complete all as specified and as directed by Eng-in-charge.

Supply,laying, jointing,testing LT cable 1100 volts grade, PVC insulated armoured and PVC sheathed with stranded aluminium conductor heavy duty, including cable glands, cable lugs etc. to suit the cable size, laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors road etc; fixed concealed in walls encased in GI Pipe etc complete all as specified and as directed by Eng-in-charge.

LT Cable 10 Sq mm, 2 core complete all as specified and as directed by Eng-in-charge.

LT Cable 25 Sq mm, 4 core complete all as specified and as directed by Eng-in-charge.

LT Cable 35 Sq mm, 3.5 core complete all as specified and as directed by Eng-in-charge.

LT Cable 70 Sq mm, 3.5 core complete all as specified and as directed by Eng-in-charge.

LT Cable 95 Sq mm, 3.5 core complete all as specified and as directed by Eng-in-charge.

LT Cable 185 Sq mm, 3.5 core complete all as specified and as directed by Eng-in-charge.

LT Cable 400 Sq mm, 3.5 core complete all as specified and as directed by Eng-in-charge.

Taking down and disconnecting of old unserviceable LT U/G cable of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) complete all as specified and as directed by Eng-in-charge.

Taking down and disconnecting of old unserviceable street / flood / post top / garden / bollard light fittings of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) complete all as specified and as directed by Eng-in-charge.

Supply & Fix flood light 150 watt, high power LED 6000K New Generation Energy Saving PCGLF T1 150 Power coated PDC Aluminium body with toughened glass visor. Efficacy > 100Lm/w. in 5700K CCT. IP66 , suitable for highlighting architectural features orretail spaces complete all as specified and as directed by Eng-in-charge. Make : Cat Part No-PARO206015 Polycab / Philips / Bajaj / CG

Supply & Fix flood light 50 watt, high power LED 3000/5700K energy saving, Highly efficient integral type mid power made of pressure die cast aluminium housing with 10 KV SPD, toughned glass, w/o Lens.IP66, suitable for highlighting architectural features orretail spaces complete all as specified and as directed by Eng-in-charge. Make : Cat Part No-HLFLD-ML17-50-CW of Halonix / Philips / Bajaj / CG

Supply & Fix LED Street Light 45 watt, LUMOS-SUPER Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V complete all as specified and as directed by Eng-in-charge. Make : Cat Part No-HLSLD-15-45-CWL-R of Halonix / Philips / CG

Supply & Fix LED Street Light 60 watt, LUMOS-SUPER Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V complete all as specified and as directed by Eng-in-charge. Make : Cat Part No-HLSLD-15-60-CWL-R of Halonix / Philips / CG

Supply & Fix LED Street Light 150 watt,TOP OPENING Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V complete all as specified and as directed by Eng-in-charge. Make : Cat Part No-HLSLD-10-150-CWL-I of Halonix / Philips / CG

Supply & Fix LED Post Top Lantern 25 watt with die cast aluminium spigot, spun aluminium powder coated top cover, Aluminium PDC heat sink, opal PC diffuser and clear arcylic. IP65, Optics: PC lenses with Toughened Glass, electronic driver with input voltage range of 170 to 280V complete all as specified and as directed by Eng-in-charge. Make : Cat Part No- HLPT-04-25-CW of Halonx / Philips / Bajaj.

Supply & Fix Garden light fitting Glove suitable for 9-12 Watt LED lamp with B22d & E27 lamp holder, 1.8 mtr long GI pipe light grade 40/50mm dia including all accessories and foundation work complete all as specified and as directed by Engr-in-charge. Note : Rates of LED bulb are deemed to be included in quoted rate

Supply & Fix LED based Bollard with aluminium pipe black matt powder coated MS housing with glare free PMMA opal Diffuser, IP65, H = 800mm long. The LED shall have a CCT of 5700K with System Wattage of 10W(±10%) with minimum system lumen of 560lm. The Fixture shall have operating voltage range of 180-270V complete all as specified and as directed by Eng-in-charge. Make : Cat Part No HLOB-02-10-CW-0.8M of Halonix or equivalent in Philips / Havells

Supply & Fix LED Bollard Fixture Decorative type suitable for 9-12W B22 LED lamp, IP54 with aluminium pipe black matt powder coated MS housing with glare free PMMA opal Diffuser, - GL 11407. The Fixture shall have operating voltage range of 180-270V complete all as specified and as directed by Eng-in-charge. Make : Halonix Cat No Polycab Cat No- PGR0301007 or equivalent in Philips / Havells. Note : Rates of LED bulb are deemed to be included in quoted rate

Preparation old painted surface of steel tubular swaged poles (9 to 11 meter long) with swan neck brackets including junction box and painting with one coat of aluminium paint including painting with black colour paint in alternate strip to 1.5 mtr height from top of PCC coping and marking pole numbers with one coat of synthetic enamel paint and fixing of reflector tape 50 mm wide in alternate layer in three Nos per pole using red and yellow coloured reflector tape of superior quality complete all as specified and as directed by Engineer-in-Charge.

Preparation old painted surface of steel tubular swaged poles (3 to 5 meter long) with swan neck brackets including junction box and painting with two coat of aluminium/black paint as per existing including all fittings/fixtures of superior quality complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm, burried vertically in ground ( earth pit not less than 2.25 m deep below normal ground level) with top edge of plate vertically to a depth not less than 1.5m below ground level, connected to galvanised steel earth lead wire 4.00 mm dia ( 8 SWG) of any length as reqd at site, by means of bolts, nuts, check nuts and washers of galvanised steel, earth lead wire encased in and including 15mm bore G.I. light grade pipe from earth plate upto pole, upto 2.40 M height from GL by means of and including 25 x 3 mm M.S.F.I. Clamps, bolts, nuts and washers etc. and GI Earth lead wire poles/feeders, gang operated air break switches etc. with provision of charcoaldust and common salt packed all around the earth plate, including necessary excavation and earth work in any typeof soil/strata and testing complete all as specified and directed and shown on electrical plate No. 5 of SSR Part I (1991) complete all as specified and as directed by Eng-in-charge. Note : GI Wire beyond than 7.5 m shall be measured separately.

Supply & Fix weather and vermin proof L.T. feeder pillar box (Main feeder pillar) factory fabricated out door cubicle/kiosk type totally enclosed made out of 3.00 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber/wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly with painted one coat of red oxide primer and two coats of synthetic enamel paint of gray or any other approved colour and bus bar for 3 phase & neutral of 600 Amps capacity mounted on epoxy insulator-01 Set including connecting the following: - (i) Incoming 250 Amps, 4 pole - 01 MCCB 36 KA. (ii) Outgoing 125 Amps, 4 pole MCCB 25 KA -02 (iii) MCB DP 40, Amps,10KA, -02

S & F RVS Waterproof LED bulb, IP 68 RGB LED under water fountain light for swimming pool, pond, tank aquarium (10w warm white) complete all as specified and as directed by Eng-in-charge. Make : Philips / Havells / OSRAM / C&S.

Supply and fixing in replacement MCCB four Pole 630 Amps, 415 volt thermal release bearing adjestable type breaking cap 50 KA complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / Legrand.

Supply and fixing in replacement MCCB four Pole 400 Amps, 415 volt thermal release bearing adjestable type breaking cap 50 KA complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / Legrand.

Supply and fixing in replacement MCCB four Pole 320/350 Amps, 415 volt thermal release bearing adjestable type breaking cap 36 KA complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / Legrand.

Supply and fixing in replacement MCCB four Pole 125 Amps, 415 volt thermal release bearing cap 25 KA suitable for the MCB DB above complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / Legrand.

Supply and fixing in replacement MCCB four Pole 100 Amps, 415 volt thermal release bearing cap 25 KA suitable for the MCB DB above complete all as specified and as directed by Eng-in-charge. Make : Havells / L&T / Legrand.

S&F MCB TP, 100 Amps, 10 KA 440 volt 50 Hz complete all as specified and as directed by Eng-in-charge. Make : Havells / C&S / Standard

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 1.5 sqmm complete all as specified and as directed by Eng-in-charge. Make : Finolex / Plaza / Polycab.

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 2.5 sqmm complete all as specified and as directed by Eng-in-charge. Make : Finolex / Plaza / Polycab.

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 4.0 sqmm complete all as specified and as directed by Eng-in-charge. Make : Finolex / Plaza / Polycab.

Supply & fix in replacement PVC insulated Aluminium conductor twin core service cable ISI marked of size 6 Sqmm complete all as specified and as directed by Eng-in-charge. Make : Finolex / Plaza / Polycab.

Supply & fix in replacement PVC insulated Aluminium conductor twin core service cable ISI marked of size 10 Sqmm complete all as specified and as directed by Eng-in-charge. Make : Finolex / Plaza / Polycab.

Taking down and disconnecting of old unserviceable LT Panel of any type and size including MCCBs and MCBs for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and as directed by Eng-in-charge.

Supply and fixing in replacement ACB 4 Pole, 415 V, with Thermal MagneticRelease (Manual Fixed type) of capacity 630 Amps complete all as specified and as directed by Eng-in-charge. Make : L&T / Havells / Legrand.

Supply and fixing in replacement ACB 4 Pole, 415 V, with Thermal MagneticRelease (Manual Fixed type) of capacity 800 Amps complete all as specified and as directed by Eng-in-charge. Make : L&T / Havells / Legrand.

Supply and fix 4 pole ONLOAD Change over Switch, ui 1000v, 400 amps current capacity , 50 Hz, 415 volts with rupturing capacity 80 KA complete. (fixed in main panel) complete all as specified and as directed by Eng-in-charge. Make : HPL or equivalent

Supply and fix straight joint heatshrinkable type of LT cable for size 16 Sq mm to 35 Sq mm 3.5/4 core 1100 volts complete all as specified and as directed by engineer-in-charge.

All as per srl item No. 109 above but size 50 Sq mm to 95 Sq mm complete all as specified and as directed by Eng-in-charge.

All as per srl item No. 109 above but size 120 Sq mm to 185 Sq mm complete all as specified and as directed by Eng-in-charge.

All as per srl item No. 109 above but size 240 Sq mm to 400 Sq mm complete all as specified and as directed by Eng-in-charge.

Cutting and trimming of tree branches to clear the over head lines enroute of LT over head lines/feeders (including repairing and jointing of ACSR Conductor if damaged during cutting of trees) and removal of the trimmed branches of tree and deposit the same in waste bins inside the campus complete all as specified and as directed by Eng-in-charge.

Supply and fixing in replacement of FRP cable junction boxes including bus bar (04 Nos) of existing size including provision for fixing to existing poles with 02 Nos MS clamps of flat 40x6mm suitable size complete with nuts & bolts making connection with cable & including thimbles at suitable size complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement to street light bracket of 1.5mtr long made out of 40mm dia medium grade GI pipe bend to shape at 120 degree & welded at required end including 02 Nos MS clamps of Flat iron 40x6mm complete all as specified and as directed by Eng-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 400 sq mm complete all as specified and as directed by Eng-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 240 sq mm complete all as specified and as directed by Eng-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 120 sq mm complete all as specified and as directed by Eng-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 95 sq mm complete all as specified and as directed by Eng-in-charge.

Supply and fixing in replacement of aluminium thimble stud type suitable for size of cable 35 sq mm complete all as specified and as directed by Eng-in-charge.

Taking down carefully ceiling fans of any size for repair/service/rewinding/greasing and refixing in its original position after necessary repair/rewinding/servicing/greasing etc including connecting up with flexible twin core cable 23/0.0076 from ceiling rose or connector to fan complete and to ensure that ceiling fan should be fix in position in all respect complete all as specified and as directed by Eng-in-charge.

All as per item No 121 above but Exhaust fan complete all as specified and as directed by Eng-in-charge.

All as per srl item No. 121 above but for wall mounted fan/ pedestal fan complete all as specified and as directed by Eng-in-charge.

M&L for Rewinding of ceiling fan of sweep 1200mm/1400 mm sweep of any make and model with super enameled copper winding wire of same size as per old winding wire and confirming to relevent IS including replacement of insulation material, varnishing, greasing and lubricating, ball baring, GM bushes and replacement of suitable capacity of condenser and testing complete all as specified and as directed by Engineer in Charge.

M&L for rewinding of exhaust fan of 12" (300mm) sweep with super enamelled winding wire of same size as per old winding wire and confirming to IS including replacement of insulating material, warnishing, greasing lubricating, ball bearing, GM bushes and replacement of suitable capacity of condenser and testing complete all as specified and as directed by Engineer in Charge.

All as per item No 125 above but size of exhaust fan 380/450 mm sweep complete all as specified and as directed by Eng-in-charge.

All as per item No 125 above but wall mounted fan/ pedestal fan complete all as specified and as directed by Eng-in-charge.

M & L for repair to ceiling fans of 1200 mm / 1400 mm sweep by replacing unserviceable ball bearing No 6201/6202/6203 and suitable capacity of condenser including necessary greasing to the bearings complete all as specified and as directed by Engineer-in-Charge.

M & L for repair to exhaust fan/ wall mounted fan/ pedestal fan of of any size by replacing unserviceable ball bearing No 6201/6202/6203 including necessary greasing complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of condencer capacity 4 mfd for exhaust fan/pedestal fan/air circulator fan of any sweep and make complete all as specified and as directed by Engineer in Charge.

S&F in replacement of rubber real for ceiling fan complete all as specified and as directed by Engineer in Charge.

S&F in replacement of mild steel U clamps including 10 mm dia but, nuts, washers and split pin for ceiling fan complete all as specified and as directed by Engineer in Charge.

S&F in replacement of mild steel fan hook made out of 12 mm dia mild steel round bar of suitable size as per existing hook complete all as specified and as directed by Eng-in-charge.

S&F in replacement of upper louver conopy of ceiling fan of any sweep, make, modles & size as per existing complete complete all as specified and as directed by Eng-in-charge.

S&F in replacement of exhaust fan heavy duty 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make : Havells or in equivalent to Crompton / Bajaj.

S&F in replacement of ceiling fan heavy duty 1200 mm sweep including necessary fixing arrangement for proper fixing/hanging as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make : Havells or in equivalent to Crompton / Bajaj.

S&F in replacement of exhaust/ventilating fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make : Model Havells or equivalent of Crompton / Bajaj

S&F in replacement of wall mounting fan heavy duty 450 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent of Crompton / Bajaj

Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos mild steel hold fastner and making good the disturbed surface complete all as specified and as directed by Eng-in-charge.

M& L for cleaning of dust, greasing of bearings and painting of ceiling fans with blades and canopys with two coats of super enamelled paint by spray gun machine after filling of cavities with filler, including numbering with black letters complete all as specified and as directed by Engineer-in-Charge. Note : All required Materials are deemed to be included in the unit rate quoted.

M& L for cleaning of dust, greasing of bearings and painting of exhaust fans with blades with two coats of super enamelled paint by spray gun machine after filling of cavities with filler, including numbering with black letters complete all as specified and as directed by Engineer-in-Charge. Note : All required Materials are deemed to be included in the unit rate quoted.

Supply in replacement of blade suitable for existing ceiling fan any sweep and make including testing of ceiling fan complete all as specified and as directed by Engineer in Charge.

All as per item No 142 but for wall mounted fan complete all as specified and as directed by Engineer in Charge.

S & F in replacement of exhaust fan louver at any size and make complete all as specified and as directed by Eng-in-charge.

S & F in replacement of down rod made out of GI pipe medium grade, 15 mm dia with fan clamp incl drilling cutting threading etc all as directed for ceiling fans 1200/1400 sweep of following sizes

2 ft long

2 .5 ft long

3 ft long

M & L for PVC three core sheathed cable with stranded copper conductor of size 0.5 sqmm complete all as specified and as directed by Eng-in-charge.

S & F terminal connector 3 way of bake lite complete all as specified and as directed by Eng-in-charge.

Disconnecting and taking down the defective / unserviceable DC wiring and rewiring with same size of cable including supply and replacing of complete wire with flexible pipe, control cable including testing complete for following capacities of DG Set complete all as specified and as directed by engineer- in- charge :-

250 KVA DG Set.

125 KVA DG Set.

Supply and replacement of following spares for ‘B’ check of following capacities of DG sets:-

250 KVA DG Set : - Lubricating oil filter with ‘O’ ring

Lubrication by pass filter with rubber washer

Inobirated Corrosion

Element fuel filter

Element air cleaner outer

Element air cleaner inner

CR Plates

Diesel Filter

Air filter – Inner

Air Filter-Outer

fule pipe

125 KVA DG Set: - Lubricating oil filter with ‘O’ ring

Lubrication by pass filter with rubber washer

Inobirated Corrosion

Element fuel filter

Element air cleaner outer

Element air cleaner inner

Diesel Filter

Air filter – Inner

Air Filter-Outer

fuel pipe

Ignition switch

Batery terminal leads with copper lugs

Batery 12 Volt, DC, 180 AH for DG Sets

Supply only in Coolant green of best grade/quality in sealed packing complete all as specified and as directed by Eng-in-charge.

Supply only distilled water of best quality in 05 ltr sealed gallon packing complete all as specified and as directed by Eng-in-charge.

Supply only in replacement of Engine oil 20w50 / 10w30 complete all as specified and as directed by Eng-in-charge. Make : SERVO / CASTROL

M/S LADPURIA ENTERPRISES

J.P. Enterprises

Ashish Sehgal and Co.

M/S PRADEEP ENTERPRISES