Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.6 LAccepted-AOC | L1 | Accepted-AOC Work Order Issued |
Tender Value
₹12.1 L
EMD Value
₹24,140
Closing Date
15 Jul 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, PWD, Yanam
Chinta Street, PWD, Yanam
Improvements to the Kursampeta Water Works in Yanam (3rd Call)
2024_PWDC2_16061_1
08/EEY/2024-25
Open Tender
Civil Works
Item Rate
90 days
Yanam
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹24,140
2 Aug 2024
9 Jul 2024
16 Jul 2024
9 Jul 2024
15 Jul 2024
9 Jul 2024
Amount
15.2.1 Demolishing Cement Concrete manually/by mechanical means including disposal of material within 50 metres lead –Nominal Concrete 1:3:6 or richer mix (i/c equivalent design mix).
2.10.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, with in a lead of 50 m - all kinds of soil- pipes,cables etc , exceeding 80mm dia but not exceeding 300 mm dia.
2.27 Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete.
5.1.2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
31.128. 1C Providing and laying Cast Iron Double flanged pipe conforming to IS specification 1537 &7181 and ISI marked suitable for flanged joints in good condition including transportation of C.I.pipe from production centre/company to the site at UT of Puducherry, lowering to the trenches (or fixing in over head tanks above ground level) laying to proper grade and alignment, testing of joints with required testing equipment etc.,complete all as per IS 3114 and CPWD specification. (earth work and jointing of pipes with rubber insertion will be paid separately) -1500mm dia.
31.130. 1A Providing and laying in position flanged C.I. specials such as tees, bends, collors, tapers, caps etc.conforming to IS specification 1538 and ISI marked - 80 to 200mm dia.
31.47.4 Providing flanged joints to double flanged C.I./D.I. pipes and specials including necessary bolts, nuts, rubber insertion and testing of joints etc.,complete - 150mm diameter pipe.
31.278. 1A Erection, testing and commissioning of the centrifugal motor pumpset with pipe fittings , etc. complete – 15 HP to 25 HP Motor.
31.277. 1B Supplying and fixing of 25x25mm size vaccum pump (KIRLOSKAR/ MAXWELL/ DEKKAR) make 3 phase monoblock motor and pumpset complete – 2.2KW/3HP.
31.48.8C Providing and fixing C.I. ball type non return valve (PN1) conforming to IS 318 & IS 1363, with bolts, nuts, rubber insertion etc. complete (the tail pieces if required will be paid separately) – 150mm dia.
31.300.1A Supply and installation of DI D/F Gate Valves (Soft seated ) Resilient seated soft sealing gate valves (Sluice valves ) (Make VAG, AVK, Fouress) with body bonnet of ductile iron of grade GGG 40, wedge fully rubber lined EPDM of good quality W720, replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and the valves should be vacuum tight and 100% leak proof with face to face dimensions as per BSS 163-89/ISI 4846 - 2000/DIN3202 F4. All the valves should be Electrostatic powder coated both inside outside with pocket less straight thro body passage. All the valves shall be compatible for burried application without chambers, with pressure rating PN 10/16 - dia 150 mm.
31.136.1C Providing, laying and jointing G.I. pipes of medium class (blue) TATA, TNT, Nezone, Apollo, Zenith) conforming to IS Specification 1239 Part-I and ISI marked including transportation to the site lowering to the trenches,laying to proper grade and alignment, testing of joints with required testing equipment, including GI specials such as bends, tees,elbow, coupling, reducer etc. complete all as per IS and CPWD specification-25mm dia.
31.137. 1C Providing and fixing in position G.I. equal tee (Unique/R Brand/ HB Brand/UI Brand) conforming to IS 1239 Part-II and ISI marked, including labour charges for jointing, jointing materials etc. complete – 25mm dia.
31.139. 1C Providing and fixing in position G.I. union (Unique/R Brand/ HB Brand/UI Brand) conforming to IS 1239 Part-II and ISI marked, including labour charges for jointing, jointing materials etc. complete – 25mm dia.
31.140. 1A Providing and fixing in position G.I. reducer (Unique/R Brand/ HB Brand/UI Brand) conforming to IS 1239 Part-II and ISI marked, including labour charges for jointing, jointing materials etc. complete – 25 x 20mm dia.
31.141. 1B Providing and fixing in position G.I. elbow (Unique/R Brand/ HB Brand/UI Brand) conforming to IS 1239 Part-II and ISI marked, including labour charges for jointing, jointing materials etc. complete – 25mm dia.
31.10.3.1 Providing and fixing ball valve (brass) of approved quality complete – high or low pressure with plastic floats – 15mm Nominal bore.
31.149. 1B Providing and fixing in position G.I Pipe nipple 15cm long, including, labour charges for jointing , jointing materials etc. complete – 20mm dia.
31.151. 1A Providing and fixing in position G.I Pipe nipple 30cm long, including, labour charges for jointing , jointing materials etc. complete – 15mm dia.
31.141.1 Providing and fixing in position G.I. elbow (Unique/R Brand/ HB Brand/UI Brand) conforming to IS 1239 Part-II and ISI marked, including labour charges for jointing, jointing materials etc. complete – 15mm dia.
31.141. 1B Providing and fixing in position G.I. elbow (Unique/R Brand/ HB Brand/UI Brand) conforming to IS 1239 Part-II and ISI marked, including labour charges for jointing, jointing materials etc. complete – 25mm dia.
10.25.1 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in stringers, treads, landings etc. of stair cases, including use of chequrred plate wherever required all complete.
31.258. 1C Supplying and fixing of 1x3x10 sq.mm (Single run) PVC insulated copper submersible flat flexible cable of finolex make complete 0 above 20 HP Pumpset.
31.256. 1C Supplying and fixing of fully automatic air break star delta starter range for 13A to 25A F.A.S.D. (Bharat culter Hammer/ L&T/Siemens make) with suitable M.S angle frame etc. complete – 20 HP to 25 HP pumpsets – (ML-1.5).
10.20 Providing and fixing bolts including nuts and washers complete.
31.259. 1B Supplying of 3.5/4x50 sq.mm underground cable (Paragon/ Suncab/ Empire) complete – suitable for (30 HP to 40 HP pumpset)/(upto 40 KVA Genset).
15.53.2 Dismantling of C.I. Sluice valve including stacking of useful material within a lead of 50metres – above 150mm diameter.
31.48.3F Providing and fixing C.I. sluice valve (PN 1.6) (with Cap) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.complete (the tail pieces if reuired will be paid separately) – 250mm dia.
31.161. 1K Providing, laying and jointing UPVC metre pipes (Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcaps etc.,complete all as per IS and CPWD specification. - 250mm dia.
31.172. 1H Providing and fixing in position UPVC moulded tail piece without flange (Finolex/jain) (0.6Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc,complete - 200mm dia.
31.52.2 Constructing masonry Chamber 90 x 90 x100 cm inside with 35 class designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter 160 mm bottom diameter and 180 mm deep (inside) with chained lid and R.C.C. top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design-with brick class designation 35.
14.43 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete.
13.48.1 Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacture's specification - Two or more coats applied on walls @ 1.25 ltr / 10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm.
13.48.3 Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr / 10 sqm of approved brand and manufacture.
13.48.2 Painting wood work with deluxe multi surface paint of required shade. Two or more coat applied @0.90 ltr / 10sqm over an under coat of primer applied @ 0.75 ltr / 10 sqm of approved brand and manufacture.
Basic Code No.E381 Supplying and fixing of 100Aporcelain fuse.
Basic Code No. 1372E Supplying and fixing 150mm dia (Rubber insertion for flanged pipe joints)
Basic Code No. 1544 Supplying and fixing 100 A,TPN, Oneway, tap off box with TPN disconnector FSU and ISI Marked HRC fuses for rising mains.
Basic Code No. 1610 Supplying and fixing 3 Pole MCCBm 100A, 16KA
Basic Code No. 1105 Supplying and fixing 10 Sq.mm ISI Marked, FRLS PVC insulated, single core copper conductor cable (Multistand).
Basic Code No. 1101 Supplying and fixing 1.5 Sq.mm ISI Marked, FRLS, PVC insulated, single core copper conductor cable (Multistrand)
Basic Code No.3330 Supplying and fixing Difital Ammeter Range (0-1200A) Make: Siemens/Legrand-Lexic.
Basic Code No. 3332 Supplying and fixing Difital voltmeter (0-500V). Make: Siemens/Legrand-Lexc.
Basic Code No.3334 Supplying and fixing 100/5A current transformer (0.5% precision. Make: L&T-Hager/ Legrand-Lexic-Burden 5VA.
Basic Code No. 3338 Supplying and fixing Toggle switch. Make: C&S
Basic Code No.3298 Supplying and fixing DOL starers 0.5HP to 7.5HP with relay range 0.63A to 13A. Make: Siemens/ BCH/ L&T.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .