Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.9 LAccepted-AOC NEAR MPEB OFFICE DHANA DISTT SAUGOR MP 470228 | DHANA | SAUGOR | MP | 470228 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹21.1 L+₹15,857 (0.76%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹24.0 L+₹3.1 L (15.0%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹24.2 L+₹3.3 L (15.7%)Rejected-Finance | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹25.6 L+₹4.7 L (22.3%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
Tender Value
₹27.3 L
EMD Value
₹55,000
Closing Date
31 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER SAUGOR
GARRISON ENGINEER SAUGOR-470001
SPECIAL REAPRS TO BLDG NO. FET 3, 4, 7A INCLUDING CERTIN REV AND MINOR WORKS UNDER GE SAUGOR
2023_MES_612115_1
GE/SGR/TOK-38 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
SAUGOR
Class D a (i) and as per tender documents
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹55,000
Yes
14 Oct 2023
4 Aug 2023
2 Sept 2023
4 Aug 2023
31 Aug 2023
19 Aug 2023
5 Aug 2023 - 14 Aug 2023
Amount
Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m deep in soft/loose soil and getting out complete all as specified and directed
M&L for excavating over areas, not exc 1.5m deep & getting out in soft / loose soil complete all as specified and directed
M&L for approved earth filling in floors or pavings, laid in layers not exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed
M&L for broken stone or boulders hard core of gauge not exc 63mm deposited spread and levelled in layers not exc 15cm thick watered and rammed to a true surface complete all as specified and directed
Removing excavated soil exc. 50m but not exc 100m & depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed
M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) mass concrete as in foundation filling and mass concrete complete all as specified and directed
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded mechanically crushed stone aggregates) for foundation including rafts, footings, foundation beams, plinth beams and bases for columns complete all as specified and as directed.
M&L for reinforced cement concrete (design mix) M-25, (using 20mm graded mechanically crushed stone aggregates) as in columns, pillars, piers, post and struts complete all as specified and directed
M&L for reinforced cement concrete (design mix) M-25, (using 20mm graded mechanically crushed stone aggregates) as in beams/ lintels over 1.5m span complete all as specified and directed
M&L for reinforced cement concrete (design mix) M-25, (using 20mm graded mechanically crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc, complete all as specified and directed
M&L mild steel "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed
All as per item 11 above but for 5mm dia and over upto 10 mm dia and including 10mm dia in stirrups, spacers and binders.
M&L for form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed
M&L for form work to sides of columns getting rough finished surfaces of concrete complete all as specified and directed
M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. fair finished surfaces of concrete flat complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n.exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and directed
M&L for brickwork with subclass `B' bricks, old size, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed
M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed
M&L for rendering 15mm thick on fair face of brickwork in CM (1:6) finished even& smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) in ceiling complete all as specified and directed
M&L for two coat cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall be paid seperately under respective item)
Supplying only integral waterproofing compound complete all as specified and directed
M &L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and directed.
M&L for applying two coats of acrylic distemper, white or tinted over a coat of wall primer and applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed
M&L for preparation of new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed
M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in CM(1:6) complete all as specified and directed.
M&L for glazed ceramic tiles of size 450mm x 300mm x 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match colour of tiles laidover and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .
S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed
S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed
S&F two way bib cock with wall flage chromium plated brass complete all as specified and directed. Make:- Parryware cat-No-G3334A1 or equivalent make as specified in Appx 'C' of Particular specifications
S&F CP hot & cold water wall mixure unit with arrangement for overhead shower and with hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe complete all as specified and directed.
S&F 15mm bore stop cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions (weight not less than 400gms) complete all as specified and directed
S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed
S&F Ball PVC valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed
S&F wash hand basin mixture15mm bore cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes complete all as specified and directed. Make:- Parryware cat-No-G3314A1 or equivalent make as specified in Appx 'C' of Particular specifications
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered wall construction, ISI marked hoisted & fixed in position of 1000 Ltrs Capacity complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with adhesive joints fixed to walls complete all as specified and directed.
S&F stack clamps out of 50mm X 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securing ends of stays to wall or roof for 110 mm bore pipe complete all as specified and directed.
S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed.
S&F PVC Bends any radius 110mm dia provided with access door complete all as specified and directed.
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed.
M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.
S&F CP soap dish CP brass complete all as specified and directed..
S&F CP fancy type Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F vitreous China bowl urinal angle back of size 430mm x 370mm x 340mm white (min.), with grating & union for discharge pipe including waste pipe (excluding flushing cistern, flush pipe ) complete all as specified and directed.
S&F vitreous China bowl urinal half stall type white with grating & union for discharge pipe including waste pipe (excluding flushing cistern, flush pipe ) complete all as specified and directed.
S&F vitreous China wash basin, white, flat back, size 550mmx400mm including 32 mm brass waste coupling,waste pipe and brackets complete all as specified and directed..
S&F in repair vitreous China wash down water closet pan (pedastal pattern), white including white seat cover complete all as specified and directed.
S&F PVC valveless, syphonic action type, flushing cistern (dual 5/10ltr capacity), low level, white, with intel, ball valve, float , handle and flush pipe 32mm bore,and brackets complete all as specified and directed.
M&L for reinforced concrete pipes 150mm dia ,class NP2 ,laid and jointed complete with socket and spigot joint and sealed complete all as specified and directed
M&L for concrete bed of PCC 1:3:6 type C2 using 40mm graded stone aggregate for NP2 150mm bore, bedding and hanching completely after pipes are laid, jointed and tested complete as specified and directed
M&L for cutting chases, pinning in, in brick/ stone wall making good to facings where required and pointing in cement mortar 1:3 or P. C. C 1:2:4 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring insert sheet in wall. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.
S&F factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube complete all as specified and directed.
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed.
S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150 mm complete all as specified and directed.
S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.
S&F Butt hinges of 100 mm size, Medium weight, stainless steel and fixed complete all as specified and directed.
S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Al. section thickness 1.50 mm }
M&L for precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.
M&L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in surface channels and drains complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate laid in panels incl finished even and smooth with using extra cement as in plinth protection incl necessary form work to edges and filling of joints with bituminous sealing compound complete all as specified and directed.
M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregates) as in coping ,benching in man holes or similar work complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block glossy finished, chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment over complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M&L for septic tank for 10 users as in any type of soil , foundation in PCC 1:2:4 , brickwork in CM 1:4 , RCC Slab in M-25 design mix including plate embeded all arround / fibre reinforced cover with angle iron frame vent shafts and sludge chambers etc complete all as specified and shown on Drgs.
M&L for soakage well excavation in any type of soil, foundation PCC 1:3:6 wells of honey combed and solid in M-25 Design mix including intercepting chamber screen chamber brick work in CM RCC cover slab in M-25 filling with brick bat complete of size 2.40 mtr dia and 3.00 mtr deep complete all as specified and shown on Drgs
M&L for rendering 10mm thick on fair faces of roof concrete surfaces in CM (1:4) finished even & smooth without using extra cement mixed with water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed. Note:-WPC shall be measured and paid separetly under respective Item.
M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified as under:-
(a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (c ) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (d) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (e) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (f) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .
Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed..
Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.
Demolition of PCC of any description and in any position unreinforced complete all as specified and directed.
Dismantling of wall ceiling board (fibre,pulp,insulation etc)or insulation board/slab/blankers,any thickness ,including cover fillets complete all as specified and directed.
Taking down wooden roof trusses,coupled rafters or trussed beams of span exc 4metres and not exc 8 metres complete all as specified and directed..
Taking down cement plaster on brick wall including raking out,joints hacking for key's scrubbing down with water complete all as specified and directed.
M&L for mirror polished machine cut Kota stone slab flooring 20mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
M&L for mirror polishing existing kota stone flooring including filling all existing cracks and jointing with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and not exc. 0.18 sqm (400mm x 400 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for 16mm to 18 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc complete all as specified and directed.
M&L for 40 mm thick PCC type B-1, (1:2:4) (using 20mm graded stone aggregates) surface finished even & smooth using extra cement complete all as specified and directed.
M&L for forming construction joint 30mm deep x 10mm wide filled with Grade A sealing compound complete all as specified and directed.
S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F white Non Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed.
Taking down and refixing existing GI ( cold rolled) snap grid of any size & any description with ceiling boards complete all as specified and directed.
M&L for moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering complete all as specified and directed.
M&L for PCC 1:4:8, Type D2 (using 40 mm graded stone aggregates), 100mm thick, as in sub base complete all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles or Kota stone complete all as specified and directed.
M&L for two coat cement plaster ,first coat 15mm thick CM 1:6 on brick wall surfaces and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed. Note:-WPC shall be paid seperately under respective item
M&L for rendering 15 mm thick on surface other than fair face of brickwork with CM 1:6 finished even & fair complete all as specified and as directed
M&L for precast cement concrete 1:1.5:3 type B1 using 20mm graded stone aggregate as in kitchen platform slab, shelf slab, manhole cover slab etc including necessary form work etc., complete. Note : Reinforcement shall be measured and paid separately.
S&F 25 mm bore MS chromium plated conduit drapery rods, suitable for door/widows curtain with dooms with brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified and directed.
Taking down chowkats/Frames of area notexc 1.5 Sqm with shutter (without taking off shutters from the frame) each complete all as specified and directed.
Taking down door Shutters and frames of any description exc 1sqm and exc 2 sqm and re-fixing same opening or different opening after closing and adjusing to the size including necessary hinges etc
S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X18 mm,shutter top &bottom of size min 18X39 mm ,shutter interlock min size 39X18 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }
S&F Steel work in purlins/rafters/posts with round/rectangula/square hollow mild steel section complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws complete all as specified and directed.
S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for profile pattern sheet fixed with self driving screws complete all as specified and directed
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for one coat of synthetic enamelled paint on old painted steel based surface of any desription over 10cm width or girth including preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed
M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed
M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of acrylic distemper, white or tinted over a coat of wall primer and applying birla / J. K. wall care white putty 2mm thick for levelling the surfacesof walls complete all as specified and directed.
M&L for applying two coats of acrylic distemper, white or tinted over a coat of wall primer and applying birla / J. K. wall care white putty 2mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls and applying two coats exterior emulsion paint over one coat of exterior primer complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE
M&L for complete removal of existing treatment of wall surfaces and applying two coats exterior emulsion paint over one coat of exterior primer complete all as specified and directed. Make:- Asian ACE or equivalent make as approved by GE
Taking down GI tubing and connections of 15mm bore complete all as specified and directed
Taking down GI tubing and connections of 20mm bore complete all as specified and directed
S&F in repair PVC float valve assembly including assessories with float valve 20mm dia (Make prayag) complete all as specified and directed.
M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , pillars and other similar situations complete all as specified and directed
M&L for mild steel framed & hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks ,cattle traps & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.
M&L PCC type C- 2, 1:3:6 (using 40mm graded stone aggregates) 100mm thickness as in flooring complete all as specified and directed
M&L for 600mmx 600mmx 8mm to 10 mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
All as per Srl item No. 119 above but as in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) -ditto-
S&F mild Steel plates (Plain or chequred) channels, square cut or notched forming holes, with riveted, bolted, welded attachement conforming to Fe 410 - W (Gde-E-250) Quality-B complete all as specified and directed.
M&L for applying Birla / J. K. wall care white putty 2mm thick for levelling the surfaces of walls and applying two coat of synthetic distemper over a coat of interior primer incl. preparation of new plastered surfaces of walls complete all as specified and directed.
M&L for cement concrete 1:2:4, type B0 ( using 12.5mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work complete all as specified and directed
Taking down existing plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.
Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed
Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed
M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed:-
One light, fan point controlled by one switch
One 5 Amp independent socket point controlled by one switch
One 3 pin ,5 Amp socket point with other switch on the same board
All as per Srl item No.126 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed
S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed
S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed
S&F switch modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed
S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed
S&F ceiling rose, surface backlit,three terminal complete all as specified and directed
S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed
S&F modular fan step regulator 120W, 2 module complete all as specified and directed
S&F MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed
All as per Srl item No.135 above but SPN 40 Amps, 240 V.
S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed
S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 63 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed
S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed
S&F in replacement LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make Havells Cat Part No LHEXBLP7PN1W020, 4 feet or eqvt make as pecified in Appx 'C' of Particular Specifications
S&F in replacement conventional recess mounted fitting to LED 2' X 2' ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make:-Havells cat part no PLANO2X2PLR36WLED857S or eqvt make as pecified in Appx 'C' of Particular Specifications
S&F in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed
M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed
S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed
S&F exhaust fan, Metal body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed
S&F exhaust fan, Metal body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed
Taking down fan ,sealing cable end,dismantling blades and removing fan and blades to store and refixing/hanging in only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed by Engr-in-Charge.
M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.
S&F in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed
M&L for GI pipe bracket of size 40 mm dia medium grade of length not less than 1.5 Mtr long and bent to a shape incl fixing wall with 02 Nos MS flate clamp of suitable size incl nut bolt and washers complete all as specified and as directed.
Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 50 sqmm 3.5 core complete all as specified and directed
Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and directed
M&L for sand cushioning in trenches for the cable complete all as specified and directed. Note:- Punned thickness shall be measured and paid
Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed
Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed
S&F in replacement of GI Pipe light grade 50 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed
S&F box type LED optic fitting 1x9 Watt 2 feet box type complete .Make:Havellls /Wipro/CG ll as specified and directed by Engr -in -Charge . Make Havells Cat Part No LHEXBLP7IN1W009, or eqvt in Bajaj cat part No BCLSB10WH/ CG Cat par No LCTL-9-CDL
S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM complete all as specified and directed
S&F LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed.
S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make -Havells Cat Part No GHWAMGTWH025) or equivalent make as specifed in Appx 'C' of Particular Specifications
S&F GI tubing 25 mm bore medium grade with all fittings laid in floors trenches complete all as specified and directed
Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of pipeline as the case may be and getting out in any type of soil complete all as specified and directed
S&F the Gun metal gate valve iron wheel head both end screwed of size 25mm bore for iron pipe approved all as specified and directed.
Cutting existing GI tubing for altrations, screwing existing tube size of 40mm and 50mm dia for new connection including earth work and clamp necessary fitting as per site required complete all as specified and directed.
Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 Sqmm, 2 core complete all as specified and directed
m/s mohansingh
v k builder
maharaja construction and suppliers
d k suppliar
M K Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .