REPAIR TO OPEN DRAIN FOOTPATH, ROAD SIDE FURNITURE FENCING UNDER AGE BR-II AT AMRITSAR CANTT

Amount

Demolition of PCC in ground floors and paving not exc 15cm thickness (below or above ground level) ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Cement concrete 50 mm thick type C-1 (1:3:6) using 20 mm graded stone aggregate as in plinth protection & sub base etc ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for 75 mm thick PCC ( 1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for sand filling 25mm thick for laying of interlocking block ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Cement concrete machine pressed interlocking pavour block any shape and size confirming to IS 1568-2006 in M-35 grade, tiles 60mm thick Jointed and pointed in neat cement slurry as in floors ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing precoated chequered cement concrete tile 20 cm x 20cm x 25 mm thk set,jointed & pointed in neat cement slurry with grey cement and pigment in floor including screed bed 20mm thick in CM 1:6 ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for cement concrete 100 mm thick (1:2:4) type B1 using 40 mm graded stone aggregate as in floor ; Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs solar stud size 125x125x25 mm made from aluminium alloy and PC construction solar powered by monecrystaal solar pane type of battery one high capaacity no cd rechargeable battery view distance approximaate 1000 mtr LEDs 10mm,3pieces each side and pieces are used for high brightness of red colours backup 12 hours of continous lighting at night mounted on concrete or muddy ground water proof and hardness tested ; Complete all as specified and directed by Engineer-in-charge.

Supply & fixing in repairs plastic road stud DA-972 of aluminium alloy body reflective panel dynamically designed to bear maximum load with two highly reflection moulded in PMMA material size of stud 110x120x24mm weighing approx 435 gm ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for forming fair finished drain or channel in cement concrete,using extra cement, including forms,moulds,mitred/stopped ends etc; Complete all as specified and directed by Engineer-in-charge.

Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) as in boundary wall, drain etc; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Brick work but except brick (old serviceable brick obtained from dismantling shall be reused after necessary cleaning of mortar) in CM 1:6 ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as in boundary wall, drain etc ; Complete all as specified and directed by Engineer-in-charge.

Taking down cement plaster on brick or stone or concrete surfaces of wall etc ,icluding raking out joints , hacking for key, scrubbing down with water etc ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for preparation of new plastering surfaces of walls and applying two coat of cement base paint over a coat of primer etc. ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished the surface for even and smooth ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for preparation of old painted steel surfaces of any description, over 10cm in width or girth, not otherwise described for One coat of synthetic enamel paint ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for One coat of synthetic enamel paint after preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for applying one coat of synthetic enamel paints to kerb stone over 10 cm width or girth complete ; Complete all as specified and directed by Engineer-in-charge.

Demolition and breaking up AC drain pipe set in cement morter.etc ; Complete all as specified and directed by Engineer-in-charge.

Supply and fixing 110 mm bore PVC (SWR) pipes rain water pipe single socketed in any length joints fixed to walls with and including clamps, nut bolts etc ; Complete all as specified and directed by Engineer-in-charge.

Supply and fixing 110 mm bore PVC (SWR) bends any radius with access door ; Complete all as specified and directed by Engineer-in-charge.

Dismantling of One Way Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately) ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for providing precast cement concrete louvres and jallis, 40mm thick(measured solid) of type C0 1:3:6(12.5 mm graded aggregate and set in cement mortar 1:4), including all moulding but excluding frame ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for Pre-cast cement concrete type B-1 (1:2:4) 20mm graded stone aggregate for kerb stone block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1 : 4 ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour preparation of new surface of curb stone of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint ; Complete all as specified and directed by Engineer-in-charge.

Material and labour for preparation of old decorated brick/ concrete plastered or unplastered surfaces of walls, pillars,cornices by Brooming down etc and applying one coats of cement base paint on walls, pillars, cornices etc ; Complete all as specified and directed by Engineer-in-charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided ; Complete all as specified and directed by Engineer-in-charge.

Dismantling RCC fencing posts any section incl taking out embedded portion and making good distrubed ground (posts embededed in natural ground) ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. ; Complete all as specified and directed by Engineer-in-charge. (each line wire to be measured)

Fixing only Chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire ; Complete all as specified and directed by Engineer-in-charge.

Supply only MS galvanished chain link fencing using 4mm dia GI wire 50 x 50mm mesh as in fencing ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing and other steel section, drilled and countershunk, embedding in concrete and screwing etc post and struts in fencing inluding cutting tops to shape as directed, drilling holes, notching for wires etc flat iron fillets, round bar and nut/bolt (for securing wire mesh ) ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing mild steel bolts screw (machine made) with hexagonal or square head at one end and screw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 11 to 15mm, ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing mild steel bolts screw (machine made) with hexagonal or square head at one end and screw the other or screw both ends, each each screwed ends, to be fitted with washer and one hexagonal or squre nut exceeding 10cm and not exceeding 15 cm long and dia meter of shank 11 to 15mm, ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for PCC (1:3:6) type C-2 using 40 mm graded aggregate as in foudation Filiing Etc ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing rolled mild steel sections ( angles, tees etc ) as in post fixed with angle cleats, MS plate etc including necessary welding etc ; Complete all as specified and directed by Engineer-in-charge. ( Fe-410 w gde E-250)

Supply and Fixing MS work ( MS angle Fe-410 w gde E-250 quallity A) as in roof truss (framed), purlins, rafters including distance pieces, cleats etc including necessary cutting, welding etc ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing for pre-painted galvalume aluiminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws ; Complete all as specified and directed by Engineer-in-charge.

Material and Labour for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer on new surface ; Complete all as specified and directed by Engineer-in-charge.

GEE EMM ASSOCIATES

ESS KAY BUILDER

Sai Construction Co.

RAJ KAMAL BUILDERS

m/s. gopal krishan