Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹37.4 L+₹3.8 L (11.4%)Rejected-Finance RANGAPAHAR RAILWAY CROSSING GATE NO 1 DIMAPUR 797112 NAGALAND | DIMAPUR | NAGALAND | 797112 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹37.5 L+₹3.9 L (11.7%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹38.0 L+₹4.4 L (13.2%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹38.2 L+₹4.6 L (13.8%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹35.3 L
EMD Value
₹71,000
Closing Date
13 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 869 EWS
GE 869 EWS C/o 99 APO Pin-913869
PROVN OF STORAGE ACCN AT R AND O FLT AND CERTAIN MINOR WORKS AT LEIMAKHONG MIL STN
2022_MES_539134_3
8424/E8
Open Tender
Civil Works
Item Rate
210 days
LEIMAKHONG MIL STN
AS PER TENDER CODUMENTS
2 documents required · 2 mandatory
₹500
GE 869 EWS
₹71,000
Yes
21 Feb 2023
22 Dec 2022
14 Jan 2023
22 Dec 2022
13 Jan 2023
30 Dec 2022
Amount
Schedule 'A'
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavation over areas exc1.5m and n.exc 1.5m deep and getting out in soft/loose soil for foundation complete all as specified.
ditto item no. 3 but for each additional 1.5m or part thereof in depth beyond the first 1.5m upto 3.0 m depth complete all as specified.
ditto item no. 3 but for each additional 1.5m or part thereof in depth beyond the first 3.0m upto 4.5 m depth complete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick as in soft/loose soil complete all as specified and as directed.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Removing excavated material/soil exc. 250 m but n exc. 500 m and depositing where directed complete all as specified.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping including necessary formwork complete all as specified and as directed.
M&L for plain cement concrete (PCC) type B1 1:2:4 (20mm graded aggregate) as in copings including necessary formwork complete all as specified and as directed.
M&L for cement concrete (1:2:4) type B1 using 20mm graded crushed stone aggregate as in coping, benching, padding, back filling in chowk complete all as specified and directed.
M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.
M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.
M & L for cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.
M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with gray cement and pigment complete all as specified and directed.
supply only Fine aggrigate(sand) for concrete complete all as specified
M & L Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar complete (1:6) all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B0 with using liquid WPC at the rate of 200ml per bag (50kg) of cement and using necessary formwork complete all as specified and as directed.(Note: Integral water proofing compound shall be measured and paid separately.)
M&L for Hardcore of broken stone or boulder of gauge exc. 63 mm but not exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L hardcore of gauge n exc 63mm, broken stone or boulders deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed
M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:4) complete all as specified and directed.
M&L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.
M & L for brick work with sub class ‘B’ brick with sewer brick straight or curved on plan exc 6 m mean radius for man holes/septic tank /soakage well etc in sewer works, built in cement mortar( 1:3) complete all as specified and directed.
Material and labour for brick work with sub class “B’ bricks in one brick thick in honey comb walling in cement mortar (1:4) complete all as specified and directed.
M & L for loose filling of Aggregate gauge 80 to 150 mm in soakage pits and soakage well complete all as specified and directed.
M & L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Using Dimapur Sand)
M&L for rendering 15mm thick on fair faces of brick work in CM (1:4) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing the surface even and smooth without using extra cement all as specified.(Using Dimapur Sand) (Note: Integral water proofing compound shall be measured and paid separately.)
Supply of Integral WaterProofing Compound ISI Marked complete all as specified and directed.
M & L for preparation of new external plaster surface of wall by removing all loose adhering powder materials of defective paint by brushing scraping and water jetting and make the surface smooth using a coat of white birla putty and applying two coat of weather proof paint over a coat of water thinable cement primer complete all as specified & directed.
M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed
M&L for Reinforced cement concrete (nominal mix) type B-1 (1:2:4) using 20mm grade stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for Reinforced cement concrete (nominal mix) type B1 1:1:2 using 20mm grade stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed.
M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised surface of concrete complete all as specified and directed
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed.
Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, fair finished complete all as specified and directed
Use and waste of formwork to flat rough finished faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed
M & L for Precast cement concrete type B1 1:2:4 (Nominal mix) using 20mm graded crushed stone aggregate as in cover slab, set in cement mortar 1:6 complete all as specified and as directed.
M & L for reinforced cement concrete (nominal mix) type B1 (1:2:4) using 20 mm graded stone aggregate in roof beams, cantilivers, bressummers, lintels over 1.5 m span complete all as specified and directed
M&L RCC (Nominal Mix) (Nominal Mix) Type B1 1:2:4 mix using 20 mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed
M&L for RCC grade(Nominal Mix) type B1 1:2:4 using 20 mm graded aggregate in slab supported on walls,beams and columns,roof/chajja , landing ,balconies ,canopies,deck slab and shelves etc complete all as specified and directed. (Note- Form work and reinforcement will be measured and paid separately.)
M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.
All as per item here in before as above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders all complete as specified and as directed .
M & L TMT mild steel bars 6mm to 8 mm dia and over ,cut to length,bend to shape required, including cranking ,bending spirally for hooping for columns,hooking ends and binding with the including mild steel wire(annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed.
M & L for 75mm thick cement concrete type C-2 1:3:6 using 40mm graded aggregate as in sub base complete all as specified and as directed by the Engineer-in-Charge
M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15 mm thick sreed bed in CM 1:4 complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 grade (Nominal mix) Type D2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.
M & L for 20mm thick screed bed or bedding layer in cement mortar (1:3) for laying floor tiles etc complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.(Note: Screed bed will be measured & paid seperately)
M&L for machine cut kota stone slab 20-25mm thick in riser of steps,skirting,dado and pillar over & including 10 mm cement mortar backing in cm (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
M&L for 2nd class hardwood plain , solid, straight chowkhats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as complete all as specified and directed..
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as complete all as specified and directed.
Supply & Fix for 30mm thick factory made of shutter 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); kiln seasoned and chemically pressure treated complete as sepecified and directed by Engineer-in-Charge.
S&F for 100 mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified.
S&F for 100mm dia pipe Cast Iron cowl for vent pipes complete all as specified.
S& F 150 mm dia reinforced concrete pipes class NP-2 laid and jointed complete with collars complete all as specified and directed
M & L for concrete bed to drain pipes 150 mm including packing under ,and haunching against the sides of pipes after they are laid and tested in cement concrete(1:4:8) type D2 using 40 mm graded stone aggregate complete all as specified and directed.
S & F mild steel flat iron as in hold fast including screwing or welding complete all as specified and directed
S & F 2nd class hard wood small fittings such as brackets of any type ,latch and hinge block ,shaped door and window stops and the like including all necessary labours articles n exe 200 cu.cm each complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150mm long alumiunium alloy handles fabricated type anodised complete all as specified and directed.
S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.
S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with 150mm overall length of cover plate complete all as specified and directed.
M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.
S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.
S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed.
S&F structural steel work in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for 2nd class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15mm to 20mm and fixed with 30mm laps complete all as specified and directed
Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross "T" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing truss with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights all as specified and directed
S & F 75mm bore PVC (SWR) pipes, single socketed in any legths with rubber ring joints using solvent adhesive fixed to walls with brackets etc
M&L for PVC (SWR) vent cowl of bore 75mm complete all as specified and directed.
S&F 110mm PVC (SWR) Tee dia as complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints ,laid in trenches or in floors as in waste/soil pipe complete all as specified and directed
M & L for PCC 1:3:6 type C2 (nominal mix) concrete bed to 100mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Cutting into existing manholes for connecting new drains for pipe of 100mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (Nominal mix) using 20mm graded crushed stone aggregate, smooth finished, and reforming benching as required complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing unserviceable materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.
Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed) (a) One light point controlled by one, one way switch
(b) One Ceiling/exaust fan point controlled by one, one way switch
(c) One socket outlet 5 Amps 5 Pin on independent board
(d) One socket outlet 5 Amps 5 pin on same board
All as per item No.87.00 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.
S&F modular switch, 6 Amps, single pole, one way, one module complete all as specified and directed.
S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.
Supply and fixing modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module.
S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.
S&F modular switch, 16 Amps, single pole, one way, one module complete all as specified and directed.
S&F modular white cover plate with frame for fixing of 8 module complete all as specified and directed
S&F modular white cover plate with frame for fixing of 12 module complete all as specified and directed
S&F modular white cover plate with frame for fixing of 2 module complete all as specified and directed
S&F modular white cover plate with frame for fixing of 3 module complete all as specified and directed
S&F blank spacer plate for single module complete all as specified and directed.
S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed.
Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 4 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 12 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.
S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole and neutral 63 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 06 to 32Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F MCB single pole 63 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.
S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.
S&F LED tube light fitting 20W LED 6500K basic all purpose surface and wall mounted LED robust and high perfomance batten LED luminair comprises of extruded channel in thermally conductive material glare and smooth lightwith complete all as specified and directed.
Supplying and fixing 1100 volts grade heavy duty cable PVC, insulated aluminium conducotrs of size 51.10, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable 2 core of 10 sqmm complete all as specified and directed
Supplying and fixing 1100 volts grade heavy duty cable PVC, insulated aluminium conducotrs, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable 2 core of 10 sqmm size complete all as specified and directed
M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of G I or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & as directed.
M & L for sub main wiring with 2 single core 6.0 Sqmm PVC FRLS insulated unsheathed cable multi-stranded copper conductor drawn through and including PVC casing/capping of suitable size with all fittings and fixing accessories on roof, walls, ceiling etc. including 6.0 Sqmm PVC insulated unsheathed one core multistranded copper conductor earth wire complete all as specified and directed.
Taking down LED tube light fittings and kept in safe custody for refixing to its original position including provision of cable from ceiling rose or connected to light complete as directed.
Taking down old unserviceable service cable from and including battens/suspending wires complete as directed.
Taking down ceiling fan/exhaust fan, dismantling blades and kept in safe custody for refixing to its original position including provision of cable from ceiling rose or connected to light complete as directed.
Hanging only/ Refixing ceiling/exhaust fan received from under item Srl No above and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed.
S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP-66 high power LED light 25 watt including suitable size of wall bracket and connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.
S&F Air termination, single pointed aluminium rod 12mm dia and 300mm long complete all as specified and directed.
S & F galvanised iron strip 32 x 6 mm with saddles and fixing screws etc complete all as specified and directed.
S & F Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.
Supply and laying 40 mm bore GI tubing , light grade with all fittings complete in walls , ceiling or in floors complete all as specified and directed.
MAURYA CONSTRUCTIONS
APPLE CONSTRUCTION
M/S BIJOYA LAXMI ENTERPRISE
SHARMA ENTERPRISE
M/s Ritz Marketing
L BINOD CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .