Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹30.8 L
EMD Value
₹30,800
Closing Date
22 Jun 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Facilities Management Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED Facilities Management Division, Bangalore
Providing Improvement Works to Horticulture Department Nursery Area located at Facilities Management Division, HAL Bangalore.
7795
TENDER NOTICE/NCP/06/24-25/04
Works
Contract Section Civil-FMD-Bangalore
₹1,180
₹30,800
22 Jun 2024
8 Jun 2024
8 Jun 2024
22 Jun 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE FACILITIES MANAGEMENT DIVISION
NAME OF THE WORK: “Providing Improvement Works to Horticulture Department Nursery Area located at Facilities Management Division, HAL [Bangalore]." CONTRACT NO. HAL/FMD/R-61A/23-24
Name of the Contractor :
Sl. No Specification Quantity Unit Rate in Figs [Excluding GST] Rate in words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any.
1 Earthwork excavation in Trenches in all soils of depth and width not exceeding 1.50m and getting out including refilling after the work in layers of 20Cms thick, watering, curing, consolidation, shoring, clearing grass, shrubs, stacking, spreading, etc., all complete as directed by Engineer-in-Charge. 25.00 Cu m 0.00
2 Earthwork Excavation over areas for Column Foundation in all soils of depth not exceeding 1.50m, including getting out, depositing, etc., all complete as directed by Engineer-in-Charge. 30.00 Cu m 0.00
3 Earth Work Excavation in post holes (or similar holes) each not exceeding 0.50Cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth in layers not exceeding 25cms including depositing, spreading, watering, consolidation, removing the surplus earth to a distance not exceeding 50m,etc., all complete as directed by Engineer-in-Charge. 125.00 Nos 0.00
CEMENT CONCRETE
4 Supplying, mixing and placing cement concrete (1:3:6) using 40mm down graded granite aggregate thickness as required including consolidation, curing, formwork, etc., all complete for foundation bed, filling and mass concrete, etc., all complete as directed by Engineer-in-Charge. 26.00 Cu m 0.00
5 Supplying, mixing and placing plain cement concrete (1:2:4) with 20mm and down graded aggregates with reinforced cement concrete, thickness as ordered in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,, etc., at all levels including necessary formwork, consolidation, levelling, curing, all materials, labour, lead & lift, tools, plant & machinery, etc., all complete as directed by the Engineer-in-Charge. [Reinforcement shall be paid seperately] 22.00 Cu m 0.00
6 Brick work with table moulded bricks built in cement mortar (1:6) for superstructure at all levels, straight or curved on plan exceeding 6m mean radius for 230mm thick walls, including raking out joints 10mm deep scaffolding, curing, cost of materials, labour, at all heights, etc., all complete as directed by the Engineer-in-Charge. (Brick conforming to IS 1077 Sub Class ‘A': having compressive strength not less than 35Kgs/ Sq.cms). 15.00 Cu m 0.00
STEEL, IRON & ALUMINIUM WORK
Note : For measurement, the weight of steel sections, plates, reinforcement steel bars, wire fabrics etc., shall be calculated from the tables given in relevant Indian standards or actual whichever is less. Where the weight is not given in Indian standards, it shall be calculated at 7850 kg/m³. No tolerance on account of rolling margin shall be allowed on the nominal weight of steel sections etc.
7 Supplying, straightening, fabricating and fixing Steel reinforcement of HYSD TMT Bars of not less than Fe 415 grade conforming to IS 1786-1985 for all concrete reinforcment members / works including cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it, etc., complete
all as per specifications, drawings and as directed by the Engineer-in-Charge. Note: (i) Only authorized laps, chairs etc., shall be considered for measurement, (ii) The standard weight including Tolerances as per IS 1786 shall be considered for acceptance of material. The Rolling margins shall be accounted by the contractor without any extra cost. 1.50 M T 0.00
8 Supplying, fabricating and fixing Joist, channel, angle, or tee sections, fixed independently including welding, cut to ordinary lengths i.e. within 20mm of the length, making holes in the wall, inserting the structural members, grouting with cement concrete and also painting with a coat of approved zinc chromate primer, preparation, etc., all complete as directed by the Engineer-in-Charge. 12.00 M T 0.00
9 Supplying and fixing in position MS plain / chequered plate Fe 410 W (E 250) quality - B conforming to IS 3502 square or notched [Ordinary and counter sunk] forming holes including cutting to required size, edges truly squared, providing lifting arrangements, providing holes, strengthening, etc., all complete as directed by the Engineer-in-Charge. Note: Frame if any shall be paid separately. 0.25 M T 0.00
10 Supplying MS galvanized chain link fencing of approved manufacture and of any size or type to framed metal or wooden frame work including necessary clips, staples, etc., all complete as directed by Engineer-in-Charge. 1.80 M T 0.00
11 Fixing only above chain link fence to MS Posts / Frame work with all required scaffoldings, supporting structures, etc., and fixed with galvanized steel wire / wire stapples / pins or bolts, nuts and washers and welding if required including provision of binding wires, etc., all complete as directed by Engineer-in-Charge. 450.00 Sq m 0.00
12 Supplying and fixing in position Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket, etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings, etc., all complete as directed by the Engineer-in-Charge. 50.00 Kgs 0.00
13 Supplying and fixing in position Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings, etc., all complete as directed by the Engineer-in-Charge. 30.00 Kgs 0.00
14 Supplying, fabricating and fixing single skin trapezoidal profiled precoated coloured galvalume sheets of approved colour for roofing, cladding, flashings, curves, gutters, ridges to match the profile of the sheet, etc., the sheet shall be 930-1020mm cover width with 28-32mm crest depth at 186-250mm c/c manufactured out of 0.50mm (TCT) total coated thickness High tensile steel plain sheet with Aluminium zinc alloy coating substrate (as per AS1397). The profile & length of the sheet shall be to suit site requirement. The steel base material shall have minimum 550 MPA yield strength made out of cold rolled steel & shall be coated with anti-corrosive layer of zinc aluminium alloy coating, zinc 43.5% & aluminium 55% with minimum 150 gms/Smtr mass total on both sides. All specials & accessories should be factory fabricated flashing, rigid pieces or any other covering shall be made out of the same material as that of roofing. The product shall be fastened using No 14-10X20mm [Or as per design] galvanized Lex-self drilling fasteners of
& quality including Neoprene washer on each crest of sheet for connecting with purlins, pre cast RCC beams [Purlins]. All side & on each crest of sheet for end laps shall be adequate to make the roof leak proof. The work shall be carried out as per manufacturers specifications. The payment will be done on the actual finish / curved surface areas of the sheets. No separate payment will be made for the laps of sheet, accessories, bolts, nuts, washers, adjustable bolts & supports for gutter & other fixtures. These are assumed to be indicated in the net quoted rates. Necessary cutout in the roof / cladding shall be provided for exhuast fans / turbo ventilators, fixing translucent sheets for natural light & the roof shall
be ensured leak proof after fixing the translucent sheets etc., complete including necessary cutout will be made for windows, exhaust fans etc., complete all as directed by EIC. [Note: The price of roofing and cladding shall include manufacture, supplying and transportation to site, sheeting materials for roofs for fasteners, necessary for AC duct and proper sealant, flashings, trims, gutters and down spouts to ensure a weather tight buildings. The agency shall submit test certificate regarding specification of materials and other properties from the manufactuer and sample shall be got approved before ordering and lap will not be considered for payment] [ Performance Guarentee bond for 5 Years for leak proof roofing shall be given by the contractor on Non judicial stamp paper of Rs.200/- . The 10% of completed value of this item shall be dedcuted as defect Liability Deposit and the same shall be returned after sucessful completion of 5 Years from the date of completion of contract / project as a whole] 225.00 Sq m 0.00
15 Supplying and fixing in position 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall, etc., all complete as directed by the Engineer-in-Charge. 90.00 Sq m 0.00
16 Supplying and laying Cement concrete type B-1, (1:2:4) 20mm graded aggregate of average thickness 75mm for flooring concrete including laying to required gradient and finishing the surface smooth using extra cement, etc., all complete as directed by the Engineer-in-Charge. 40.00 Sq m 0.00
17 Supplying and laying Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, etc., all complete as directed by the Engineer-in-Charge. 15.00 Sq m 0.00
18 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, etc., all complete as directed by the Engineer-in-Charge. 20.00 R Mt 0.00
19 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, etc., all complete as directed by the Engineer-in-Charge. 430.00 Sq m 0.00
20 Providing, applying and laying cement mortar (1:4) plastering 15mm thick on brick/concrete surfaces, finished even and smooth with trowel including lime rendering over damaged surface with necessary materials, labour, scaffolding, curing, tools and tackles etc., at all heights, all complete as directed by the Engineer-in-Charge. 80.00 Sq m 0.00
COLOUR WASH AND DISTEMPERING
21 Supplying and providing 3mm thick wall care putty for walls and ceiling of approved make [Birla / JK] over the plastered / damaged wall surface, pitting in plaster shall be made good with plaster of Paris mixed with colour to be used. The surface shall then be rubbed down again with a fine grade sand paper and made smooth and even to receive further treatment, with all materials, labour, tools, tackles, etc., at all heights, etc., all complete as directed by Engineer-in-Charge. 450.00 Sq m 0.00
22 Painting one coat of Alkali Resistant primer of approved make over the new plastered internal wall / ceiling surface including necessary preparation, scrapping old treatment, making the surface smooth to receive the further treatment, with all materials, labour, tools, tackles, etc., at all heights, etc., all complete as directed by Engineer-in-Charge. 500.00 Sq m 0.00
23 Painting Two coats of distemper oil emulsion of approved manufacture, colour, shade, tint to existing interior surface of walls and ceiling conforming to IS applied evenly to give a uniform finish including preparing the surface using necessary sand paper and using roller for painting the distemper, cleaning the dirt and other impurities, scrapping smooth and filling crevices, brooming down with wire brush, scrapping down smoke soot, moulds, necessary scaffolding, to include pigments if required, with all materials, labour, tools, tackles, etc., at all heights, etc., all complete as directed by Engineer-in-Charge. 475.00 Sq m 0.00
24 Painting with Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with all materials, labour, tools, tackles, etc., at all heights, etc., all complete as directed by Engineer-in-Charge. 550.00 Sq m 0.00
25 Painting with Two coats of synthetic enamel paint conforming to I.S.2932 of approved colour and manufacture of any description having girth or width more than 10cm on previously painted surface over a coat of approved primer including preparation of surface by wire brushing/sand papering the loosen paint and wiping the surface clean with mineral solvents to remove grease and hard marks, scrapping down smoke soot, moulds, complete removal of existing treatment wherever required, applying acrylic putty to fill the dents, etc., prepare the surface for smooth & even using sand paper, metal paste for steel surface, KPF putty for wooden surface and putty paste for plastered surface before painting the first coat. Paint shall be applied to ensure smooth and even surface, free from brush marks, with all materials, labour, tools, tackles, etc., at all heights, etc., all complete as directed by the Engineer-in-Charge.
a) For Steel Surface [New] 550.00 Sq m 0.00
b) For Wooden Surface [Old] 28.00 Sq m 0.00
DISMANTLING & DEMOLITION
26 Demolition of SSM / Brick Work built in cement mortar of any description, thickness, height including disposal of demolished material to a distance exceeding 500m but not exceeding 1500m and depositing as and where directed, etc., all complete as directed by Engineer-in-Charge. 25.00 Cu m 0.00
27 Dismantling of Cement Concrete of any description, thickness, height and in any position not otherwise specifically provided for including disposal of demolished material to a distance exceeding 1500m but not exceeding 5000m and depositing as and where directed, etc., all complete as directed by Engineer-in-Charge. 2.50 Cu m 0.00
28 Dismantling existing wrought iron or mild steel work of any description not otherwise provided for in any description including stacking and handing over all the serviceable materials to HAL Stores / Maintenance Department, etc., all complete as directed by Engineer-in-Charge. 2.00 M T 0.00
29 Dismantling existing Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in any description including handing over all the serviceable materials to HAL Stores / Maintenance Department, etc., all complete as directed by Engineer-in-Charge. 250.00 Sq m 0.00
Grand Total 0.00
Add 18% GST 0.00
Grand Total (Including GST) 0.00
HINDUSTAN AERONAUTICS LIMITED
Facilities Management Division
Pre-Qulification Profile (To Be uploaded along with Part A)
Tender Ref No. or Contract No.: HAL/FMD/R-61A/23-24
Name of Work: Providing Improvement Works to Horticulture Department Nursery Area located at Facilities Management Division, HAL [Bangalore].
Estimated Amount in Rs.: 3080000
Tender Notice Date : 22.05.2024
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory Please Enter Name of the Individual/firm/company
2 Type of ownership PlsEnter Type of Ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc., Pls enter Details of Constitution
4 Address for correspondence: Pls Enter Address
5 (a) PAN No.: Pls Enter Pan NO
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code 3 #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 I.T Returns for past 03 years 999999 5 J 6
2023-24 Pls Select 'Yes' ' No' for IT Return for All Three years 1000000 4 K 7
9 Average annual financial turn over during the last 3 years, ending 31st March 2023 of the previous financial year [ should not be less than 30% of Amount put to tender] 4999999 3
YEAR TURN OVER IN Rs. Enclosed / Not Enclosed REMARKS 5000000 2
2022- 2023 Rs. Pls Enter Turn over in Rupees for all the 3 years 7499999 2
Average annual Financial turn over 0.00 924000.00
Avg Annual Turnover criteria is not met 10000000 1
10 ESI & PF Nos with proof Nos Enclosed / Not Enclosed
ESI Registration No/. with proof if any Remarks if any
PF Registration No. with proof if any
11 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No. Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)
Name of the Bank
Type of Account
12 Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the last date of Tender submission solvency cal
Name of Bank & Branch Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs #REF! 28-Jun 0 40000
Date of Issue 200000 40000
Value in Rs. 200001 150000
Solvency value is NOT as per NIT
13 Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender. 1232000 500001 250000
Completed similar works during last 7 years Pls Select %of similar works completed during last 7 years 1000000 250000
Work NoI Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 1000001 500000
Brief Description of Work: Please enter Details for Work No 1 2000000 500000
Completed value of Work in Rs. 2000001 1000000
Date of Commencement of Work 4000000 1000000
Date of Actual Completion of Work: 4000001 2000000
Work No II Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal 10000000 2000000
Brief Description of Work: Pls Enter Details for Work No II
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work: work done
Work No III Type of Work: [ Incase of private works the same shall be supported with TDS certificate] Related Document to be Uploaded to eProcurement Portal #REF! 2555
Brief Description of Work: Pls Enter Details for Work No III #REF!
Completed value of Work in Rs.
Date of Commencement of Work:
Date of Actual Completion of Work:
14 Details of person holding the power of Attorney (If different from contact person)
Name Related Document to be Uploaded to eProcurement Portal
Mobile No. Pls Enter Details for Person holding Power of Attorney
Ph. No. with STD code
FAX No. with STD code
15 DECLARATION I
The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
16 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be uploaded for evaluation of offer. Pls Accept the Delaration II
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
TN06.pdf
TENDER_DOCUMENT • 2.61 MB
61ATB.pdf
TENDER_DOCUMENT • 1.96 MB
ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
amd.pdf
TENDER_DOCUMENT • 0.51 MB
61AChecklist.pdf
TENDER_DOCUMENT • 0.11 MB
61AUndertaking.pdf
TENDER_DOCUMENT • 0.55 MB
61APQ.pdf
TENDER_DOCUMENT • 0.21 MB
61APBF.xlsm
TENDER_DOCUMENT • 0.03 MB
61APB.pdf
TENDER_DOCUMENT • 0.34 MB
61APQF.xlsm
TENDER_DOCUMENT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .