Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹41.3 L+₹1.2 L (3.02%)Rejected-Finance | L2 | Rejected-Finance Due to not lowest bidder | |
| 3 | L3₹41.7 L+₹1.6 L (3.94%)Rejected-Finance OPPOSITE RADIO STATION TOWER TILAK NAGAR SAGAR ROAD BIKANER 334001 RAJASTHAN | BIKANER | RAJASTHAN | 334001 | L3 | Rejected-Finance Due to not lowest bidder | |
| 4 | L4₹41.8 L+₹1.7 L (4.17%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance Due to not lowest bidder | |
| 5 | L5₹42.6 L+₹2.5 L (6.26%)Rejected-Finance | L5 | Rejected-Finance Due to not lowest bidder |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
6 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) BIKANER
GE (N) BIKANER MIL STN BIKANER
SPL REPAIR TO BLDG NO P-80, WASHROOM IN P- 78 AND CERTAIN MINOR WORK AT VARIOUS LOCATION AT MIL STN UNDER GE (N) BIKANER.
2023_MES_594232_1
GE (N) BKN-TOKEN/17/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (N) BIKANER
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (N) BIKANER
₹98,000
Yes
28 Jul 2023
10 May 2023
13 Jun 2023
10 May 2023
6 Jun 2023
24 May 2023
Amount
Demolition of cement conc. In any description and inc any position not otherwise specially provided complete all as specified and directed
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed by engineer in charge.
Dismanting floor, hearth or wall tiling including cement mortar bedding and removal of rubbish out of the premises. complete all as specified and directed by engineer in charge.
Taking down cement plaster on brick or stone walls, including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed by engineer in charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) size n.exc 1.5 sqm each.complete all as specified and directed by engineer in charge.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) size exc 1.5 sqm and n.exc 4 sqm each complete all as specified and directed by engineer in charge.
Taking down shutters of any description n exc 1 Sqm each pane complete all as specified and directed by engineer in charge.
Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each.complete all as specified and directed by engineer in charge.
Taking up or down steel tubing 15 mm dia and connections and stacking neatly for offering credit complete all as specified and directed by engineer in charge.
All as per item N 09 but 20 mm dia complete all as specified and directed by engineer in charge.
Taking down shutter of any description exc 1 sqm but not exc 2 Sqm each and refixing in the same opening after necessary easing, repairs, adjustment ect complete all as specified.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frame or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by engineer in charge.
3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames complete all as specified.
S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns complete all as specified and directed by engineer in charge.
S&F Second class hard wood plain, framed, panelled shutters 35mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats complete all as specified and directed by engineer in charge.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube suppling & fixing in opening all as specified and as directd.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bttom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, Panneling of plain color PVC sheet to be fitted in the MS frame welded /sealed to the stiles &rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site all as specfied and as directed.
S&F Butt hings, 100 mm long, extructed aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed by engineer in charge.
S&F Extruded aluminium alloy handles, 100 mm long, fabricated type anodised complete all as specified and directed by engineer in charge.
S& F Aluminium, anodised , 100 mm long, barrel tower bolts of extruded section and fixed complete all as specified and directed by engineer in charge.
S&F 100 mm long, Butt hinges, stainless steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F 250 mm long sliding door bolt, plate type, mild steel, stove enamelled black with bright bolt of not less than 12 mm dia with & including a minimum of six bolts and nuts, four on bolt plate and two on staple plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F 150 mm long, mild steel, barrel tower bolt, stove enameled black with bright bolt, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F 150 mm size mild steel, stove enamelled black, pressed handles, oval type, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F curtain rods, 20mm dia mild steel, chromium plated including brackets, stops etc and fixed in repairs.
M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.
S&F Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick cement screed in 1:4.complete all as specified and directed by engineer in charge.
M&L Dark shade Vitrified Ceramic tiles 10 mm thick (square /rectangular) polished , area of each tile not exceeding 0.36 sqm, in floors on 20 mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.
Ditto all as per item no 29 above but in skirting /dado over and incl 10 mm thick rendering inCM 1:4 all as specified and as directed.
M & L PCC 25 mm thick 1:2:4 type B0 (12.50 mm graded aggregate) in any position in ground floor/roof complete all as specified and as directed by engr-in-charge.
PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and directed by engineer in charge.
PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring jointed fixed to walls complete all as specified and directed by engineer in charge.
PVC (SWR) branch piece, single (single Y) equal or unequal, 75mm bore complete all as specified and directed by engineer in charge.
PVC (SWR) branch piece, single (single Y) equal or unequal 110mm bore complete all as specified and directed by engineer in charge.
PVC (SWR) bends any radius 75mm bore complete all as specified and directed by engineer in charge.
PVC (SWR) bends any radius 110mm bore complete all as specified and directed by engineer in charge.
PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement.complete all as specified and directed by engineer in charge.
S&F 150 mm Floor door stoper of aluminium alloy and insulation and tounge, anodised with`hard steel spring in floor complete all as specified and as directed by Engineer-in-Charge.
M& L GI Tubing, medium grade galvanised, 15 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by engineer in charge.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.
M& L GI Tubing , medium grade galvanised, 20 mm bore with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by engineer in charge.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.
S&F in repair vitreous china wash down water closet pan with fixing bolts, trap (pedestal pattern), white, (excluding flushing cistern and flush pipe) complete fixed in repairs
Supply and fix in repair vitreous china wash hand basin Oval type back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand etc complete fixed in repairs.
S & F in repair PVC valveless syphonic action type flushing cistern, 10 ltr capacity low level , white with inlet, ball valve, float and handle including brackets fixed in repairs.complete all as specified and directed by engineer in charge.
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by engineer in charge.
S&F in repair Stainless steel tubular towel rail, 20 mm dia D type 60cm long between flanges complete all as specified and directed by engineer in charge.
M&L in repair Bib tap 15 mm dia, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe and fixed in repairs complete all as specified and directed by engineer in charge.
M&L in repair Stop valve, 20 mm dia, fancy type, Chromium plated, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs. complete all as specified and directed by engineer in charge.
M&L in repairPillar taps, 15mm dia, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs.
S& F in repair Plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device as directed by Engineer in charge.
S&F in repair CP Health Faucet fixed type suitable for EWCs with 1,5 mtr stainless steel tube complete all as specified and directed by Engineer-in-charge.
S&F in repair CP toilet paper holder fancy type complete all as specified and directed by Engineer-in-charge.
S&F in repair angle valve cast copper alloy fancy type CP with long shank and cup and screwed for 15 mm iron pipe fixed as directed by Engineer in charge..
S&F in repair grating 100mm dia of stainless steel with and without hole having minimum weight 75 gm complete all as specified and directed by Engineer-in-Charge.
S&F Waste pipe 32mm for WHB with coupling fixed in repairs complete all as specified and directed by engineer in charge.
Rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.
Rendering 15 mm thick in CM 1:4on other than fair faces of brick work or concrete surfaces finished fair and even as directed by engineer in charge.
Rendering 5mm thick on fair faces of conc. Surfaces in cement mortar 1:3,even and smooth w/o using extra cement as on ceiling complete all as specified and directed by engineer in charge.
M&L for preparing new surface of wood of any desc over 10cm width or girth and applying two coats of synthetic enamel paint .over pink primer as directed by engineer in charge.
preparing new surface of steel of any desc over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide as directed by engineer in charge.
Preparing old decorated surfaces of wall and applying two coat of white wash as directed by engineer in charge.
M & L for preparation of old surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying white wall care putty for filling the undulations as required and finished with two coat of oil bound distemper white/ tinted complete all as specified and as directed by Engr-in-Charge.
Preparing surfaces of plaster or unplaster new and applying three coat of white wash on ceiling complete all as specified and directed by engineer in charge.
Preparing newly plastered surfaces of wall and applying two coats of colour wash as directed by engineer in charge.
Preparing of New decorated surfaces of wall and applying two coat of distemper oil emuision as directed by engineer in charge.
Providing and fixing in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief
S&F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any thickness in each pane for metal frames complete all as specified.
Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge..
M&L for 10 mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only)
S&F for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per sq m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge
M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified
M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge.NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.
M&L 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.
Ditto all as per Srl item No 76 but except tiles complete all as specified and directed by engineer in charge.
S&F in repair towel ring with material brass with glossy finish with fitting all as specified and as directed by engineer in charge.
M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in filling in chowkats, hold fast block etc. complete all as specified and as directed by Engineer-in-Charge.
Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge.
M & L for preparation of old surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying two coat of exterior emulsion/ weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry-215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and directed by GE.
M & L for preparation of New surfaces by complete removal of existing treatment of painted wall incl pillar etc by mechanical equipment like electric wall sander and applying two coat of exterior emulsion/ weather proof exterior grade paint of first quality by using over a coat of primer incl sealing the cracks all as specified in manufacturers instruction Make STP Ltd (Shallcry-215)/ Asian Paint (Apex Ultima)/ Berger Paint (Weather coat long) all as specified and directed by GE.
S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with L-type or J-type or cranked hook bolts as specified.complete.
S&F in repair Plain, galvanised 0.63 mm , mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating as specified and as directed by Engineer in charge.
M&L for Mild steel work conforming to Fe-290 Gde E-165 in wind ties for roof including securing bolts including all necessary drilling, bolting or riveting etc complete.
Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including automatic flushing cistern with brackets, flush pipe, grating and Union including discharge pipe.
M&L for Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S.1161-1979 grade St.-240 complete.
Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed by engineer in charge.
M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified
PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. complete all as specified and directed by engineer in charge.
Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by engineer in charge.
Dismanting of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by engineer in charge.
Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by engineer in charge.
Demolition of brick work built in cement mortar including all quions arches pillars etc complete all as specified and directed by engineer in charge.
M&L for Fly ash Brick work with sub class ‘B’ old burnt brick , straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.
M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete
M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates
S&F Prelaminated partical board 18/19mm medium density ,prelaminated with one side with decorative choice laqmination and other side balancing with white lamination fixed with screws as in shelves to kitchen almirah and cub board fixed in repair complete all as specified and directed by engineer in charge .
M and L for 20mm thick granite (of any type) work in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as specified and as directed by enineer bin charge.
M&L in repair Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union fixed as directed by Engineer in charge .
M&L 18-20 mm thick single piece machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L 18-20 mm thick single piece machine cut kota stone slab on vertical surface and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 500 lit complete all as specified and as directed by Engineer-in-Charge.
M&L Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 2 layers, HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.)
Ball valve high pressure of PTMT with epoxy coated almn rod and high density plastic ball screwed for iron pipe and fixed fixed in repair.of 20mm .
M&L welding in repairs not exc 2.5 cm in length and not exc 6 mm thick of metal complete all as specified and directed by Engineer-in-Charge.
S&F in replacement Vitreous china squatting pan of orissa pattern, white of size 580x440mm with integral foot rest and P or S trap in cluding provision of lime concrete bedding min 150mm thick (1:2:5) inc taking out old WC complete.
S&F mild screw bolts (machine made) 5 to 10 mm diameter of neck with haxagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted wwith washers and one haxagonal or square exc 5 cm but not exc 10 cm long complete all as specified and directed by engineer in charge.
Dismantling of stone slab and tiles of any description or thickness in floor, apron etc laid bedded and pointed in any mortar as directed and specified by engineer in charge.
Preparing surfaces of plaster or unplaster old surface and applying two coat of white wash on ceiling as directed by engineer in charge.
M&L for PCC 1:4:8 type D2 using 40 mm graded crushed brick aggregate as in Sunken portion, surroundings of WC seats and similar works, complete all as specified & as directed.
M&L for rendering 10mm thick in cement mortar 1:3 on fair faces of brick masonry or concrete surfaces of walls in Sunken portion, mixed with integral liquid water proofing compound as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified. Note : Supply only integral liquid water proofing compound shall be measured and paid for separately.
M&L for removal of loose concrete and cleaning the surfaces and filling the cracks with Polymer modified mortar using Dr Fixit Pidicrete URP or other equivalent product as approved by GE and thereafter applying two coats of Dr Fixit Bathseal WPC or other equivalent product as approved by GE in Sunken areas complete all as per manufacturer’s instructions, specified & directed. Note : Where contractor desire to use equivalent product of Dr Fixit Pidicrete URP and Dr Fixit Bathseal WPC, he shall submit the technical literature of equivalent products to establish the equivalency of products to the entire satisfaction of GE and both products shall be of same manufacturer as approved by the GE.
Dismantling and disconnecting of existing CI soil vent pipe upto 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories.complete all as specified and directed by engineer in charge.
S & F 75mm dia (Spun pipe) Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.
S & F 75mm dia (Spun pipe) Cast Iron soil waste & vent pipes in any length with or without ears, with cement joints but fixed to walls with & including fixing clamps complete all as specified and directed by Engineer-in-Charge.
Ditto all as per item no 117 but except pipes complete all as specified and directed by engineer in charge.
Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 75 mm pipe complete all as specified and directed by Engineer-in-Charge.
Extra over cast iron pipe and fittings if lead joint is provided in lieu of cement joint for 100 mm pipe complete all as specified and directed by Engineer-in-Charge.
S & F in 100 mm dia branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.
S & F in 75 dia branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed by Engineer-in-Charge.
S&F in 75 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete complete all as specified and directed by Engineer-in-Charge.
S&F 75 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) without oval access door complete complete all as specified and directed by Engineer-in-Charge.
S & F 100 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete complete all as specified and directed by Engineer-in-Charge.
S & F 100 mm bore CI bends (any radius), diminishing pieces or tapers (larger bore measured) without oval access door complete complete all as specified and directed by Engineer-in-Charge.
S & F 100 mm bore CI tee (any radius), diminishing pieces or tapers (larger bore measured) with oval access door complete complete all as specified and directed by Engineer-in-Charge..
S & F , 100 mm CI bends (any radius) with duck's foot or heel rest complete complete all as specified and directed by Engineer-in-Charge.
S & F for cast iron vent cowls 100 mm dia complete complete all as specified and directed by Engineer-in-Charge.
S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof 75 mm bore complete all as specified and directed by Engineer-in-Charge.
S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof 100 mm bore complete all as specified and directed by Engineer-in-Charge.
Preparing of old decorated surfaces of wall and applying one coat of distemper oil emuision including applying white wall care putty for filling the undulations as required as directed by engineer in charge.
M&L for Preparing of old decorated surfaces of ceiling and applying one coat of distemper oil emuision complete all as specified and directed by engineer in charge.
M&L for Preparing of New decorated surfaces of ceiling and applying two coat of distemper oil emuision complete all as specified and directed by engineer in charge.
S&F in repair Plain, galvanised 0.63 mm , mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating as specified and as directed by Engineer in charge.
Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed by engineer in charge.
Removing surplus spoil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by engineer in charge.
M&L for 100 mm thick PCC(1:4:8) type D-2 using 40 mm graded stone gregate as in sub base of floor finished even and rough complete all as specified.
Hardcore of Broken stone or boulders of gauge n exc 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed by engineer in charge.
M&L 60 mm thick factory made coloured glazed precast concrete interlocking paver block of grade M-35 confirming to IS 15658-2006 manufactured by vibratory process laid over sand cushioning complete all as specified & directed.
M&L for 25 mm Sand filling under floor,cushioning under interlocking tiles or in foundation complete all as specified.
Providing precast cement concrete 1:2:4 type B-1 as in kerb stone , fair faces including chamfers, weatherings, throat- ing etc. and setting in mortar (1:4) complete with joints to match as specified and directed by Engineer in charge.
M&L for preparation of new concrete surfaces , not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer as specified and as directed by engineer in charge.
S&F PVC Pipe (SWR) for waste and vent pipe with or without ears, with cement joints 110 mm dia laid in trenches complete all as specified and directed by engineer in charge.
Taking down carefully (aluminium) point wiring complete of any type (batten/ surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as spcified and directed.
Taking down old U/S existing VTPN 4way, DB TPN 4 way and DB SPN 8 way including MCB/MCCB of any capacity and any size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
Taking down submain wiring Aluminium/ copper of any size including earth continuity condutor on teak wood or conduit and removing from site and making good the disturbed surface of wall etc complete all as specified and directed.
M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic rigid PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE
(b)One pin 5 amps socket point on the same board with other switches complete
(c) One 3 pin 5 amps socket on independent board.
Ditto all as per item No 148 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .
Ditto all as per item No 148 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .
S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.
S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.
M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.
M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and as directed by engineer-in-charge.
S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.
Removing and refixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.
Taking down ceiling fan,sealing cable end,dismantling blades of any make, any sweep, and deposited to MES store.
Supply and hanging/fixing ceiling fan 1200mm sweep AC supply (input voltage range 120 to 280v), BLDC type, 5 star rated BEE and ISI marked, super enameled copper winding of 'B' class insulation, single phase 20 watt (+ 10%), PF 0.90 (MIN), air delivery of 220 CUM per min (CMM), 350 RPM (+ 10%), TEMP RISE 40 DEGREE MAX, without remote, with electronic regulator, 3 blades, down rod including accessories, total harmonic less than 10%, 5 speed, hanging in position, including making connection wih and including flexible cord twin core twisted copper conductor of size 23/0.0076 from cealing rose to fan complete all as specified and as directed. Note :- (i) Sl No of cealing fan and GE office name shall also be writing on fan with red colour permanant marker. Cost for the same shall deemed to be included in quoted unit rate. Nothing shall be paid extra on this account.
supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.
S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.
Supply and fixing LED mirror light fitting , type with high out put diffuser 2 feet, 5watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by engineer in charge.
S&F LED Bulb 9W, operating voltage- 220-240 volts, starting time < 0.5s, color temperature-6500K, lumens: min 825 complete all as specified and directed by Engineer-in-charge.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by engineer in charge.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.
S&F sheet metal enclosure MCB DB, double door, v TPN 4 way with 200 Amps rated busbar all as specified and as directed. Make:- Hegar/Legrand/Seimens
S&F MCCB 100 amps, 4 pole, 415 volts, fixed type breaking capacity 16KA complete all as specified and as directed by Engr-in-charge.
S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.
S & F MCB SPN, 5-32 Amps , 240 volts, breaking capacity 10KA 'C' Curve complete all as specified and as dircted by Engr-in-charge.
S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA 'C' Curve complete all as specified and as dircted by Engr-in-charge.
Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 250 Amps complete all as specified and as directed.
Repairing of Duct cooler along with cover, vent cement covered including total duct cleaning & sealeing for efficient functioning complete all as specified and directed by Engr-in-charge.
Supply and fix desert cooler electric driven (singal phase) having nominal air flow capacity of 4000 CUM per hour, steel body.
M&L for submain wiring with 4 runs of 10.0 Sqmm (nominal area) size main cable & 1 runs of 10.0 Sqmm size earth continuity conductor single core PVC insulated unsheathed FRLSH multistranded copper conductor 1100 volt grade ISI marked cable drawn through & including suitable size of heavy duty non metalic rigid PVC concealed conduit ISI marked & conduit fittings/accessories, fixede concealed in wall/ceiling including dismantling & taking down old unserviceable sub main wiring complete all as specified & directed. Note :-(i) 04 runs of 6.0 Sqmm size main cable, 01 run of 6.0 Sqmm size earth continuity conductor cable & Conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall be included in quoted rate of this item.
M&L for submain wiring with 2 runs of 6.0 Sqmm (nominal area) size main cable & 1 runs of 6.0 Sqmm size earth continuity conductor single core PVC insulated unsheathed FRLSH multistranded copper conductor 1100 volt grade ISI marked cable drawn through & including suitable size of heavy duty non metalic rigid PVC concealed conduit ISI marked & conduit fittings/accessories, fixede concealed in wall/ceiling including dismantling & taking down old unserviceable sub main wiring complete all as specified & directed. Note :-(i) 02 runs of 6.0 Sqmm size main cable, 01 run of 6.0 Sqmm size earth continuity conductor cable & Conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall be included in quoted rate of this item.
M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.
Excavation in trenches n. exc 1.5 m in depth and not exc 1.5 m width for laying of cable lines etc and getting out in hard/ dense soil complete all as specified.
Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified.
Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5 above the starting point complete all as specified and as directed by Engr-in-charge.
Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.
Supplying and laying un-reinforced precast concrete cable cover, class LVP,type 1 with peak, size 250mm x 150mm x 40mm complete all as specified and directed by engineer in charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50sq mm 3.5 core complete all as specified and directed.
S&F GI tubing light grade 40mm dia for protection of cable on pole/ wall etc complete all as specified and as directed by Engr in charge.
M/S ASHRAFI CONSTRUCTION CO
M S GROUP
N.K. CONSTRUCTION COMPANY
Aman Corporation
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .