Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.5 LAccepted-AOC 137 2 OLD LAL BAGH NEAR PRIMARY VICTORIA SCHOOL PATIALA 147001 | PATIALA | PATIALA | PUNJAB | 147001 | 1 | Accepted-AOC l1 | |
| 2 | 2₹2.8 L+₹34,656 (13.9%)Rejected-AOC | 2 | Rejected-AOC l2 | |
| 3 | 3₹2.9 L+₹41,968 (16.8%)Rejected-AOC | 3 | Rejected-AOC l3 |
Tender Value
₹3.0 L
EMD Value
₹6,100
Closing Date
23 May 2022, 1:00 pmClosed
XEN BML DIV PTA
XEN BML DIV PTA
Estimate for repairing renovation of Kothi No.-1 BML colony Patiala
2022_WR_85636_1
3/2022-23
Open Tender
Civil Works
Item Rate
90 days
patiala
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Yes
₹6,100
Yes
3 May 2023
14 May 2022
23 May 2022
14 May 2022
23 May 2022
14 May 2022
Amount
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats)
Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.
Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.
12.5 mm thick plaster 1:4
Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete
Nicking cement concrete surface (over 28 days old including preparation and laying slurry
Scraping:-White wash and colour wash
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 6-32amp. (10kA, Curve-C)
Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB double Pole 50, 63amp. (10kA, Curve-C)
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:-Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in thedistribution board (For SP&Ndistribution board with provision DPMCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- SP&N Double Door Distribution Board 8 way each
Providing and laying resilient vinyl sheet floorcovering 2 mm thick, having a vinyl plastic wear layer with backing intended for use in ligh tcommercial and residential buildings, duly fixed to the base floor using adhesive as approved by the manufacturer.
scraping Cement Plaster
Renewing glass panes and refixing existing wooden fillets:- Glass panes weighing 8.44 Kg/sqm
Dismantling cement conglomerate floors (25mm to 50mm) thick including concrete base
Providing & fixing in position stop cock/ Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.:- C.P. brass 15mm Angle valve without Flange
Providing and fixing in postion chinaware European type water closet suit symphonic type with P trap or S trap ( to the approval of engineer in charge) suit-consisting of 10ltr PVC flushing cistern including cost of solid white cover complete in all respect and to the entire satisfaction of engineer in charge:- Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect.
Providing and fixing jet spray with 2'-6" long PVC pipe. :- With C.P. Brass nut
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect:- Size 450mm x 300mm
Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect.(2987.00)
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge):- b. Size 550mmx400mm
Providing & fixing 4" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.
Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects.
Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-incharge )with various fixtures complete in all respect. (a)C.P. Brass extension piece, 25mm long to 50mm long
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.:- C.P. brass Bib cock long nose/ long body foam flow without flange
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect.:- C.P. brass Bib cock foam flow without flange
Providing and fixing in position PVC flexible tube connection of approved make ( to the approval of Engineer-in-charge) complete in all respect. :- PVC tube connection of size 15mm x 450 mm with C.P. Brass nut
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.
Providing and fixing in position automatic brass ball cock in tank. Plastic ball cock with rod and plastic ball:- 20mm i/d
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect:- C.P. brass towel Rails size 15mm dia 610mm long
Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.
Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ).Size 600 x 600
Wire gauze fixed on chowkats with 25mm normal red meranti wood cover molding of full width
Providing and laying jointing fixing and testing ISI marked uPVC pipe line laid as per ISI 4985-2000:- 20mm i/d
THE ROYAL PATIALA CO-OP L & C SOCIETY LIMITED
THE AHRU KALAN CO OP L AND C SOCIETY LIMITED
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .