REPAIR / MAINT OF SECURITY STREET LIGHT FLOOD LIGHT LIGHTENING CONDUCTOR POST TOP LANTERN GATE LIGHT AUTOMATIC TIMER SWITCH POLE PAINTING AND CONNECTED MISC ITEMS OF WORK AT LACHUNG LANKA AND BITCHU AND REPAIR / MAINT OF DG SET PANEL E/M EQPT LIGHTE

Amount

Taking down unserviceable fitting of any type or any wattage i.e. 100/90/80/72/60/ 45/30/25 Watt energy efficient street light fitting, identifying the fault, repair / replacement of old unserviceable accessories with new accessories, reassembling and make the street light fitting functional and refixing in existing location including three core copper PVC insulated conductor of 1 sqmm size (nominal area) of suitable length to connect the lumaniries to overhead conductor / existing lines, complete all as specified and as directed. Note : Spares part/material required for repair to street light fitting shall be measued and paid separtely under relevent items as supply only.

Supply only 1100 volts grade heavy duty cable PVC insulated and FR PVC rounded sheathed, copper conductor (flexible) industrial cable, conforming IS: 694 of size 1.5 sqmm 3 core laid along pole from junction box to light fitting, complete all as specified and as directed.

Supply only in replacement of street light driver of 25 watt to 50 watt, 230V,50Hz suitable for operation over voltage range of 140V to 270V by emoving from existing position, complete all as specified and as directed.

Supply only in replacement of street light driver of 55 watt to 100 watt, 230V,50Hz suitable for operation over voltage range of 140V to 270V by emoving from existing position, complete all as specified and as directed.

M & L in for DK Thermoplastic cable junction boxes IP 65 with of size 300x200x105 of metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 2/4 core and fixed to the PSC/Steel Poles by means of suitable size of clamps with nut and bolts and incl provn for fixing 01 No. of single pole MCBs 6-32 amps,10KA and MCB TP 6-32 amps, 10 KA, ‘C’ series 01 No inside the box incl taking down old u/s junction box, complete all as specified and as directed.

S&F in repairs LED street light fittings, IP-66, 70 watt including bracket made out of 40 mm dia light grade GI pipe not less than 1.2 mtr long bend to shape duly fixed with MS clamps of 3mm thick, nut, bolts etc complete fixed to steel tabular poles including electrical connection complete with 3 core 1.5 Sqmm PVC sheathed stranded copper wire ISI marked from junction box to fitting, complete all as specified and as directed. Make : Havells, cat part No "ENDURAOMNIPLUSSL70WLED757SASYTOPC" or equivalent model of Crompton/Bajaj/Philips

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 95 Sqmm, 3.5 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 50 Sqmm, 3.5 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 35 Sqmm, 3.5 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 25 Sqmm, 4.0 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 16 Sqmm, 4 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade, armoured, heavy duty LT UG cable of size 10 Sqmm, 2 core with XLPE insulated stranded aluminium conductor including cable gland, lugs, testing and commissioning including taking out existing cable alongwith protection covers, complete all as specified and as directed.

Excavation in trenches/ foundation in soft/ loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for foundation and getting out including forming bottom surface to required level or slope, complete all as specified and as directed.

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and as directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and as directed.

Supply and lay DWC Cable duct pipe of size 40 mm dia confirming to IS : 16205 part 24 for laying of LT cables etc complete with all accessories, complete all as specified and as directed.

Supply and lay DWC Cable duct pipe of size 75 mm dia confirming to IS : 16205 part 24 for laying of LT cables etc complete with all accessories, complete all as specified and as directed.

Supply and lay DWC Cable duct pipe of size 120 mm dia confirming to IS : 16205 part 24 for laying of LT cables etc complete with all accessories, complete all as specified and as directed.

M&L for painting of LT structure pole of any size , vertical complete with cross arms with one coat of aluminium paint after cleaning and preparation of surfaces of poles, cross arms, painting 30 cm wide Yellow and black strip on poles up to 1.5 mtr high above coping level and numbering of size 70mmx40mm by using stencil to the pole with black synthetic enemal paint (1st grade ), complete all as specified and as directed.

S&F in repair GI Pipes 40mm bore light grade in any position for protection of cable fixed at pole/laid under road , nallah, crossing walls under floors etc, complete all as specified and as directed.

Supply and fixing of automatic control panel (Nature switch) designed for automatic control of night senstive electric circuits using space grade infra -red sensor which auto matically adjusts ON and OFF time as per the seasonal variation of day light independtently of altitude and latitude for Three Phase load complete with contractor MCB and timer upto 32 Amp capcity, complete all as specified and as directed. Make HEALER EnterPrices (Model-Navdeep-54-18KW3P)/ Crompton / L&T.

Dismantling and removing old unserviceable in repairs earthing and material and labour for earthing complete wih galvanised steel earth plate electrode 60cmx60cmx6.00 mm thick burried directly in ground vertically toa depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth of not less than 1.5 m below ground level connected to and including galvanized iron earth strip of size 32x6 mm by means of bolts, nuts , chucknut, and washer etc , made of GI and connecting to earth test point all as shown as electrical plate to 5 of SSR Pt -1 2009 an as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C-I earthing chamber, precast RCC slab 50 mm thick in cement concrete (:) type B1 reinforced with welded steel wire fabricated weight not less than 4 Kg/ Sqm . Funnel with GI watering pipe 20 mm bore medium grade wire mesh test point etc, complete all as specified and as directed.

M&L in replacement of Earthing complete with galvanized steel earth plate electrodes 600x600x6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron wire 4mm dia by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, complete all as specified and as directed.

Supply and fixing in repairs post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp, complete all as specified and as directed. Crompton Make : LPTO-40-CDL/M or equivalent in Havells/Philips or equivalent

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 4 sqmm, 2 core nominal cross section in service connections including taking down old unserviceable cable, complete all as specified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm, 2 core nominal cross section in service connections including taking down old unserviceable cable, complete all as specified and as directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sqmm, 2 core nominal cross section in service connections including taking down old unserviceable cable, complete all as specified and as directed.

S&F in repairs, NG Series AIO LED solar street light fitting 40 watt is made with high efficiency mono crystalline solar PV module, lithium ferro phosphate battery with in - built BMS technology, high efficacy LED, MPPT solar charge controller with dusk down sensor with aluminium extuded body & is specially programmed to automatically control the dimming and brightness of light, which will increases the backup time, including galvanised steel pole 80mm bore dia 6 m long, embedded in PCC (1:2:4), type B2 concrete, excavation and earthwork, complete all as specified and as directed.

M&L for Routine maintenance consisting of normal repairs with periodical routine maintenance and testing of 15 to 20 KVA DG Set complete of following ( i,e. Engine, alternator etc under GE 867 EWS all including consumables items like cotton waste cloth kerosene oil etc. Maintenance will be carried out as and when ordered in writing by Engineer-in-Chare of maintenance schedule, complete all as specified and as directed. Note - Accessories / spares/ new engine oil required for replacement will be measured and paid separately under respective items of schedule ‘A’ as supply only. (i) Change engine oil. (ii) Changing of oil filters, fuel filters screen filters assy. (iii)Changing of water filter. (iv) Making up coolant. (v) Clean alternator winding in position by forced air and internal surfaces lubricate. (vi) Tightining of all nut bolts. (vii) Greasing of all points. (viii) Checking of any leaking in fuel & oil lines

M&L for Routine maintenance consisting of normal repairs with periodical routine maintenance and testing of 7.50 to 12.50 KVA DG Set complete of following ( i,e. Engine, alternator etc under GE 867 EWS all including consumables items like cotton waste cloth kerosene oil etc. Maintenance will be carried out as and when ordered in writing by Engineer-in-Chare of maintenance schedule, complete all as specified and as directed. Note - Accessories / spares/ new engine oil required for replacement will be measured and paid separately under respective items of schedule ‘A’ as supply only. (i) Change engine oil. (ii) Changing of oil filters, fuel filters screen filters assy. (iii)Changing of water filter. (iv) Making up coolant. (v) Clean alternator winding in position by forced air and internal surfaces lubricate. (vi) Tightining of all nut bolts. (vii) Greasing of all points. (viii) Checking of any leaking in fuel & oil lines

Supply only new Engine oil 15 W 20, complete all as specified and as directed. Make : HP/BP/Indian

Supply only fuel filter suitable for 15 to 20 KVA DG Set, complete all as specified and as directed.

Supply only fuel filter suitable for 7.5 to 12.5 KVA DG set, complete all as specified and as directed.

Supply only lubricant oil filter suitable for 15 to 20 KVA DG Set, complete all as specified and as directed.

Supply only lubricant oil filter suitable for 7.5 to 12.5 KVA DG set, complete all as specified and as directed.

Supply only air filter element suitable for 15 to 20 KVA DG Set, complete all as specified and as directed.

Supply only air filter element suitable for 7.5 to 12.5 KVA DG set, complete all as specified and as directed.

Supply & top up water coolant in radiotor of DG set of any capacity any make, complete all as specified and as directed. Make : TVS Girling/volvo line or of equivelent make all as directed by Engr-incharge.

Cleaning of the fuel tank of DG sets of 20/15/7.5 KVA capacity after decaning the diesel, after through cleaning with kerosene oil including replacement of level indicator pipe, complete all as specified and as directed.

M & L for cleaning/washing the radiator, complete all as specified and as directed.

M&L for replacement of Radiator hose Kit suitable for 7.5 to 20KVA DG set KVA DG set, complete all as specified and as directed.

M&L for replacement of Fan belt suitable for 15 to 20 KVA DG Set, complete all as specified and as directed.

M&L for replacement of Fan belt suitable for 7.5 to 12.5 KVA DG set, complete all as specified and as directed.

M&L for replacement of Dynamo 12 Volts, 35 amps as per existing in 20 KVA DG set, complete all as specified and as directed.

Supply and fix in replacement of Lid acid battery 12 volt 90 AH suitable for 50/ 40 KVA DG set, complete all as specified and as directed.

M&L for servcing the starting panel of DG Set, cleaning and adjusting the time setting, cleaning and tightening the lose connection of contactor, timer, HRC fuse ammeter, voltmeter etc and making for smooth functioning of the starting operation of 7.5 to 20 KVA cap, complete all as specified and as directed.

Material and labour for Load balancing of LT panel connected in DG set in all three phases of all outgoings, complete all as specified and as directed under:- a) Taking of load of LT panel out going cables with the help of tong testing three times in a day to assess maximum unbalance of load. (b) To disconnect the LT cables/ TC wires and reconnect the same as per the load of the MCCB to balance the circuit. (c) Take the building wise load on the panel and make the load balance at bldg end.

Material and labour for Reconditioning and reconnecting of AMF panel in Various type of DG set including removing of rust particles ad corrotion/ carbon from panel connected items likepower contactor, CTs, MCCB/ MCBs, complete all as specified and as directed.

Supply and fix in Replacement of Off load Change over switch 4 pole, 415 Volt, 100 Ams capacity including all incomming and outgoing electric connectios, complete all as specified and as directed.

M&L submain wiring with two single core PVC insulated, unsheathed, stranded copper conductor cable (FRLS), 1100 volts grade of size 10 Sqmm (nominal area) each and one single core 10 Sqmm (nominal area) as earth continuity conductor drawn into PVC casing capping, complete all as specified and as directed. NOTE: (i) Rates for PVC casing capping with accessories are deemed to be included in the unit rate.

Supply install in replacement and testing out door wheather proof bus bar chamber of size 100 cm x 60cm x 30cm made out of 3.15mm CRCA MS sheet having one side openable hinged door shuter with looking arangement/provn of two nos 80cm long 40x40x6mm anlge iron legs welded and 04 nos copper bus bar of 200Amp rating provn of one MCCB 4 pole 160 Amp 25 KA for controlling Electric supply complete erracted on ground with necessary PCC 1:3:6 type C2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland , lugs/thimbles with framework 1000mm (W) X 600mm (H) X 300mm (D), complete all as specified and as directed.

S&F Sheet Metal enclosure for TPN DBs, 6 way, Double Door (IP-54) TPN MCB incomer, built- in 200 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, complete all as specified and as directed.

S&F Sheet Metal enclosure for SPN DBs, 4 way, Double Door (IP-54) 240V with 200 Amps rated bus bars double door complete in and including of existing electric connection/ circuit, complete all as specified and as directed.

S&F Sheet Metal enclosure for SPN DBs, 8 way, Double Door (IP-54), built in 200 Amps bus bar complete suitable for 240 Volts, AC, 50 Hz complete in and including of existing electric connection/ circuit, complete all as specified and as directed.

M&L in replacement of u/s MCCB 04 pole of capacity 63 to 100 Amps 415 Volts with breking capacity 16 KA, complete all as specified and as directed.

M&L in replacement of u/s MCCB 03 pole 125 Amps adjustable type, 415 Volts, with breking capacity 36 KA, complete all as specified and as directed.

Supply and fix MCB, Tripple Pole & Neutral, 40-63 Amps, 415 volts, 50 Hz, 16kA, complete all as specified and as directed.

Supply and fix MCB, Tripple Pole 63 Amps, 415 volts, 50 Hz, 16kA, 'C' curve, complete all as specified and as directed.

S&F MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed.

S&F MCB, SP,240 volts, breaking capacity 10 KA, rating, 'C' curve 40 to 63 amps, complete all as specified and as directed.

S&F MCB, SP,240 volts, breaking capacity 10 KA, rating 6 to 32 amps, complete all as specified and as directed.

Dismantling and taking down Aluminium strip fixed on roof, floor wall and taking out old saddles and refixing aluminium strip on new porcelain saddles and connecting to earthing strip in original state, complete all as specified and as directed.

Supply & fix in replacement of single pointed air termination Alminium rod 12mm dia and 300 mm long incl support block incl taking down u/s, complete all as specified and as directed.

Supply & fix in replacement of single pointed air termination Copper rod 12mm dia and 300 mm long incl support block incl taking down u/s, complete all as specified and as directed.

Supply and fix in replacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawin in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32x6mm GI strip incl taking down u/s strip any type, complete all as specified and as directed.

Supply & fix in replacement of aluminium strip 25mmx 3mm as a roof conductor or down conductor complete all with saddles and fixing screws for fitting the strip, complete all as specified and as directed.

M&L for straighting and alignment of existing aluminium strip connected as lightning condoctor in roof/ wall in any type of building, complete all as specified and as directed.

Supply & fix in replacement of HDPE/porceiline insulator 15 BMD type T alongwith wooden gutkha with nut bolts / screws for fixing of copper / aluminium strips / GI strips on walls etc to the wall / floor/pole or any indicated location etc, complete all as specified and as directed.

Supply and fixing in replacement of test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm , drilled and screwed including 3 nos. 8mm dia 25 mm long hex. head screw, complete with suitable polycaronate box with locking arrangement, complete all as specified and as directed.

M&L for Reconditioning of Lightning terminal by using of required insulators and necessary screwing work in roof and refixing of air terminatin as per existing, complete all as specified and as directed.

M&L for Reconditioning/ recharging of existing earthing including excavation of earth work upto 1.5 mtr from ground level and removing of soil and old materials near from earthplate as a distance of 300 mm and add salt and coal in a layer of 15 mm from bottem level upto earth plate, reassembling of funnel and water pipe, returning filling of soil and fifing of eath chamber, complete all as specified and as directed.

Material and labour repair to self starter 12Volt of upto 20 KVA DG set as rewinding by using new supper enamelled copper wire of existing size, design and weight and replacement of bush & other unserviceable parts as required including taking down and transportation for repairs & re-fixing in original stae after duly repaired as a perfect working condition to the entire satisfaction of Engineer-in-Charge. Cat No SLF.001.00, complete all as specified and as directed.

M/s Garuda International (BID ID -3500968)

M/S KARCHEN LACHUNGPA (BID ID -3500492)

M/s Yadav Prasad Sharma (BID ID -3492175)

GEETA CONSTRUCTION (BID ID -3499547)

KAMLESH ENTERPRISE (BID ID -3498322)