Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC 1 218 1C SADAR BAZAR DELHI CANTT 110010 | NEW DELHI | DELHI | 110010 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹39.2 L+₹48,445.50 (1.25%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹40.5 L+₹1.8 L (4.54%)Rejected-Finance A 47D RAM DUTT ENCLAVE UTTAM NAGAR NEW DELHI 110059 | WEST | DELHI | 110059 | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹41.7 L+₹2.9 L (7.48%)Rejected-Finance N A | NA | NA | 121004 | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹44.0 L+₹5.3 L (13.6%)Rejected-Finance FLAT NO 101 UGF FRONT LHS RZ B 49 A GALLI NO 09 KAILASHPURI PALAM COLONY NEW DELHI 110045 | NEW DELHI | NEW DELHI | DELHI | 110045 | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹47.3 L
EMD Value
₹94,580
Closing Date
22 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
SPL REPAIR TO BLDG NO T-22A AT STN HQ, ADDN/ALTN TO BRIG LOGISTIC AND OC OFFICE AT DGNCC CAMP, SEWAGE LINE OF DELHI AREA PROVOST UNIT ADDN/ALTN AT 5 MANDIR MARG UNDER GE (EAST) DELHI CANTT-10
2023_MES_611735_2
GE/DE-56/2023-24
Open Tender
Civil Works
Item Rate
120 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹94,580
Yes
20 Oct 2023
25 Aug 2023
25 Sept 2023
25 Aug 2023
22 Sept 2023
8 Sept 2023
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.
S & F for Aluminum alloy powder coated door including frame and channel of section (Door frame single groove 101.6mm x 44.45mm x 2.1mm, shutter top section 47.62mm x 44.45mm x 1.95mm thick, shutter bottom section 114.30mm x 44.45mm x 2.15mm thick, shutter vertical section 85mm x 44.45mm x 1.80mm thick, shutter middle section 83.50mm x 44.45mm x 2.40mm thick & glazing clips weighing not less than 0.097 Kg/RM) including shutter fixed to sliding type/openable frame and channel as directed and approved by GE and as per IS specifications including provn of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring heavy duty “SAMRAT” , locking arrangement “GODREJ”, rubber gasket and door stopper complete.
S & F for Aluminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete.
S & F Aluminium alloy powder coated standard hollow section for ventilotors as per approved sample and as per IS specifications, shutters weighting 0.55 kg/RM, rectangular frames of section 101.6mm x 44.45mm x 3.18mm weighing not less than 2.54Kg/RM including provision of 5.5mm thick tinted glass of superior quality including handles, tower bolt, hinges and all standard fittings complete.
S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge.
S & F 100mm size butt hinges stainless steel complete all as specified and as directed.
S & F 150 mm size aluminium handles cast type anodised complete all as specified and directed
S & F 150mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 after dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and removing rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M & L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 after dismantling of existing floor tiles of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete.
M&L for machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed base 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing after dismantling of existing floor wall , stone slab of any description complete all as specified and as directed.
M & L for 18/20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed in CM 1:4, rounding to edge of granite after dismantling of existing granite of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete.
M & L Coloured Glazed ceramic tiles in vertical surface 200 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 10 mm thick rendering in CM 1:4 after dismantling of existing tiles of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:6 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
Taking down cement or cement lime plaster , any description on brick or stone walls or from ceilings etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair without using extra cement in any position incl scafolding etc, complete all as specified and as directed.
M & L for 15mm thick rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and fair without using extra cement in any position incl scafolding etc, complete all as specified.
M & L rendering 10 mm thick on concrete surfaces as in ceiling in CM 1:3, finished even and fair without using extra cement complete all as specified and as directed.
Providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR of ASIAN PAINT or equivalent in STP/ SIKA/ FOSROC/ BERGER/ NEROLAC) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat of SBR polymer (@ 10% of cement weigh) modified cementious bond coat @ 2.2 Kg Cement/Sqm incl taking down existing roof treatment of any type and with cement plaster on concrete surfaces, incl raking out joints, hacking for key, scrubbing down with water etc. to receive further treatment complete all as specified and as directed. Note: The application shall be executed on any type of surface and on Horizontal/Vertical areas.
Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP/SIKA/FOSROC. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers.(4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
M & L for Preparation of newly plastered internal surfaces of walls/ceilings and applying 1mm thick layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applying Two coats of Oil Bound Distemper over a coat of interior wall primer, complete all as specified and as directed.
M & L for Preparation of newly plastered external surfaces of walls upto 4 storied buildings and applying 1mm thick layer of Birla White/J K White wall care putty, again sand papering to make surfaces smooth and applying two coat of weather proofing exterior acrylic emulsion paint premium quality on wall surfaces over a coat of exterior wall primer, complete all as specified and as directed.
M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of flooring or in any position including demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete.
M & L for coloured Chequered cement concrete tiles 25cm x 25cm x 20-22mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed in CM 1:6 after dismantling of existing flooring or tiles of any type and size complete all as specified and as directed.
M & L for Coloured Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade with grey cement and pigment laid dry in floor/path incl dismantling of existing flooring or tiles of any type of any size complete.
S & F E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected.
S&F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed
S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F in repairs Angle valve of CP any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed. (Make: Jaquar/Kohler/Prayag/Plumber)
S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. Make: Jaquar/Kohler/Prayag/Plumber)
S & F in repairs 20mm dia Chromium plated towel rail 60cm long fixed to wall including all fittings for fixing complete all as specified and directed. Make: Jaquar/Kohler/Prayag/Plumber)
S & F in repairs Sinks with drainage board made of stainsless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor on to dwarf walls or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx 160mm all as specified and directed.
S & F in repairs 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.Make: Jaquar/Kohler/Prayag/Plumber)
S & F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in repairs Stainless steel Grating dome 125mm dia with or without hole for waste pipe complete all as specified and as directed.
S&F in repairs 32 mm bore PVC waste pipe with fittings of approved make suitable for WHB, Urinals and Sink etc all as specified and directed.
Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete.
M & L for form work to soffits of suspended slabs such as roof slabs, floor, slabs landings and stair and similar work not exc. 20 cm thick flat rough to receive plaster all as specified and directed.
M & L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete.
M & L for mild steel TMT bar 10mm dia and over cut to length,bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M & L for RCC (1:2:4) nominal Mix using 20mm graded agg as in slabs, supported on walls, landings, balconies and in shelves and the like complete all as specified and as directed.
Dismantling timber scantlings (Purlins/Rafters) any sec and size, in any position complete all as specified and as directed.
S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 complete all as specified and directed
S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing corrugated or semi corrugated as in roof coverings complete all as specified and as directed.
S & F painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing corrugated or semi corrugated as in roof coverings complete all as specified and as directed.
S & F in repairs 100mm dia sand cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or fixed to wall or in floors complete all as specified and as directed.
S & F in repairs 100mm dia Cast iron Bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.
S & F in repairs 100mm dia Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S & F in repairs 100mm dia cast iron cowls complete all as specified and as directed.
S & F in repairs PVC (SWR) Floor/Nahani trap, plain dia of outlet 125mm, complete all as specified and as directed.
Demolition and breaking up drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar for 150mm to 300mm dia pipe, and removal of debris from site and deposited where directed at a distance not exc 1KM from site complete all as specified and as directed.
M & L for 150 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.
M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 150 mm bore incl forming cradles complte all as specified and directed.
Eacavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation exc on for walls, shafts, manholes not exc 10 Sqm on plan or for laying pipes/cables etc and getting out in soft/loose soil complete all as specified and as directed.
Returing filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soft or loose soil complete all as specified and as directed.
Removing excavatged matereials to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified and as directed.
Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and as directed.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete including demolition of existing PCC as in plinth n exc 15cm thk all as specified and as directed.
Providing and fixing factory made uPVC white/Off colour casement (Openable) door made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + –0.2 mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated). Corner strikers Secondary striker, Cylinder. Door transmition gear made of mild steel with multi point locking system with strikes] 3D hinges of zinc alloyed (white powder coated) and 8mm thick tinted/frosted glass. (Note: The unit rate quoted by contractor include cost of glass and all other connected accessories. Net opening will be measured for payment purpose.)
Providing and fixing factory made uPVC white/Off colour casement (Openable) door made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 78mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + –0.2 mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated). Corner strikers Secondary striker, Cylinder. Door transmition gear made of mild steel with multi point locking system with strikes] 3D hinges of zinc alloyed (white powder coated) and with stainless steel wiremesh (0.36mm nominal dia of wire and average width of apreture 1.40mm. (Note: The unit rate quoted by contractor include cost of glass and all other connected accessories. Net opening will be measured for payment purpose.)
Powder coated aluminium partition with frame of standard powder coated aluminium sections of size 101.60mm x 44.45mm x 2mm in vertical and horizontal members and glazed with 5mm thick tinted glass and 12mm thick prelaminated particle board interior grade with laminations on both faces as directed by Engr-in-Charge according to site requirement including jointing cleats, glazing pins, rubber packing and fixing accessories as per site requirement, complete all as specified and as directed.
S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with ' T ' , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm and including dismantling of walls and celing existing old board (fibre pulp.insulation etc)or insulation boards/slabs/blanks any thickness including cover fillets etc including two coat of OBD over a coat of interior primer complete all as specified and directed.
M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm tile not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 and including dismantling of existing floor tiles of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick screed bed in CM 1:4 after dismantling of existing tiles of any description with cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
S & F Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, Health Faucet, flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Hindware Cat Part No 192055 or equivalent in Cera/Parryware).
S & F in repairs ready made floor/wall mounted Vanity box made of HDHMR board, both side laminated consisting of the following combination :- (a) Wash Hand Basin 810mm x 500mm. (b) Base Cabinet 780mm x 485mm x 460mm. (c) Side Cabinet 300mm x 250mm x 1800mm. (d) Mirror cabinet size 780mm x 160mm x 800mm. Make : Hindware - Cat Part No. 70089 or 70084. Make : Kohler : Cat Part No. K-31602IN-E63
S & F in repairs Brass CP basin mixer central hole, for mixing hot and cold water fixed as per manufacture's manual, with long shunk and cup washers, screwed both ends suitable for 15mm bore GI pipe joints to GI pipes or unions, complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. KUP-35051BPM, Jaquar-Cat No. KUP-35005BPM, Kohler-Cat No. K-74013IN-4BND-CP, Kohler-Cat No. K-74026IN-4BND-CP.
S & F in repairs Vitreous china urinal (White/Off White) type size (Fullstall)420 x395 x635mm incl all fixing accessories, fixed in repair complete (Make: Jaquar/Marc/Kohler)
S & F in repairs Two way Angle valve 15mm bore dia or pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete Make: Jaquar/Kohler/Prayag/Plumber)
S & F in repairs 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified. Make: Jaquar/Kohler/Prayag/Plumber)
S & F in repairs Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and as directed.
S & F in repairs CP toilet paper holder fixed with plug and brass screws, complete Make: Jaquar/Kohler/Prayag/Plumber)
S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
S& F in repairs Brass chromium plated towel rack of size 600 mm x 350mm, fixed with brass screws, fixed in repairs, complete all as specified and as directed. Make: Jaquar/Kohler/Prayag/Plumber)
M & L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.
M & L for Brick work with sub class 'B' bricks of old size, straight or curved on plan to any radious built in CM 1:4 including demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified.
S & F for Precast RCC manhole covers 75 mm thick medium duty conforming to IS-12592, complete all as specified and as directed .
M & L for 200 mm dia (internal dia) RCC hume pipe class NP -2 laid and and jointed complete with colleres complete laid in trenches and tested complete all as specified and as directed.
M& L for PCC 1:3:6 type C2 using 40 mm grade stone aggregate as in bed to drain pipe 200 mm bore incl forming cradles complte all as specified and directed.
Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm bore drain pipe complete all as specified and as directed.
M & L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in surface channels complete.
All same as per srl item No 12 here-in-before but except dismantling
All same as per srl item No 14 here-in-before but except dismantling
Provn of making hole in marble/granite slab of cooking plateforme for cooking gas pipe etc by means of drilling machine all as directed.
S&F Wall mixer 3 in 1 inlet system with provision of both shower (hand shower and over head shower) complete with suitable long bend pipe connecting leg, CP flange etc., fixed in repairs, complete all as specified and as directed.
S&F in repair Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specifed and directed.
S&F 105mm x 60mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed as per SSR Part-I complete all as specifed and directed by Engr -in- Charge.
S&F Factory Made flush shutter 30 mm thick solid core construction with block board core and ply wood faced pannels commercials type on both sideswith decorative rubber beading complete all as specified and directed.
M&L for 100 mm thick PCC cement concrete type D-2 1:4:8 as in sub bases and floor complete all as specified and as directed
M & L for OUT DOOR coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified MAKE-ENDURA BY NITCO OR EQUIVALENT
S&F Aluminium alloy powder coated (50micron) anodised auminium door frame section 100xmm x 44mm x 2mm thickness, shutters of aluminium section of size 85mm x44mm x 2mm thick Top rail and both styled of size 100mm x 44mm x 2mm thick lock rail and bottom rail of size 115mm x 44mm x 2mm thick including aluminium anodised snap beading and rubber packing & 5.50mm thick frosted designer glass/12mm thick PVC board (as approved by GE) including 100 mm long aluminium butt hinges 04 Nos each leaf 200mm long tower bolt, 200 mm long fancy type aluminium handle -02 Nos on each leaf, 4 leaver brass 100mm long mortice lock & double action floor door spring/door closer heavy duty suitable for 1mtr wide shutter for each leaf, complete all as specified and as directed.
Aluminium anodized grills with 6mm x 5mm aluminium section having square or diamond shap with fixing rails of channels 12-15mm complete all as directed.
Providing & fixing of Modular kitchen wardrobes & cupboards, all front side, bottom, top, two vertical sides, partitions, and back sides etc made out of 15-18 mm thick HDHMR board with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations. (laminates as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18'' / 20'' long, etc as required complete all as specified and as directed. (Note - Only front face measured for payment, the tenderer shall required to quote his rate accordingly and no claim whatsoever shall be entertained on account of any misunderstanding)
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, in soft/loose soil complete all as specified and directed.
M&L for Mild steel work as in Hollow section, angle Iron, flat Iron for fixed indepently connecting purlin, rafters, MS plate as reqd forming holes bolted and welded attchment and curved shaped by welding (thickness of metal n.exxc.6mm) making jointless by filling including cutting etc complete all as specified.
M&L for newly prepared surface with two coats of synthetic enamel paint over a coat of red oxide primer surface of any description over 10cm in width or grith not other wise descried
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc.
M&L point wiring with 1.5 Sq mm (nominal area) FRLS, PVC insulated un-sheathed multistranded copper conductor cable ISI marked in and including concealed PVC conduit 20mm dia medium grade ISI marked with all fittings, 1.50 Sqmm PVC FRLS insulated unsheathed multistranded copper conductor earth wire connected to common earth dolly, Metal flush box & modular cover plates of suitable sizes for fixing of modular switch, socket, fan regulator etc complete all as directed by Engr-in-Charge.
(a) one light point / fan point/ wall fan point/ bell/ buzzer controlled by one 1-way switch/ bell push.
(b) one socket outlet point 5 amps on the same board.
(c) one socket outlet point 5 amps on the independent board.
All as per srl item No. 107 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire
S&F of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.
S&F of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.
S&F of Modular socket 6 Amp, 2 in 1, universal type, 2 module size complete all as directed.
S&F of Modular socket 6/16 Amp multipurpose, 2 module size complete all as directed.
S&F of Modular bell push 6 Amp, 1 way, 1 module size complete all as directed.
S&F of Modular Fan regulator step type, 120 watts, 2 Module size complete all as directed.
S&F in replacement of electric bell of , 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed.
S&F in replacement of Modular Telephone socket Jack 01 Module size as per site requirement, complete all as specifed and as directed.
S&F in replacement of Modular TV socket Jack 01 Module size as per site requirement, complete all as specifed and as directed.
M&L in Replacement of TV Wiring with Co axial RG-6 heavy duty PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to TV socket, drawn in and including concealed PVC conduit 20mm dia medium grade with all fittings & making good complete all as specified and as directed.
M&L in Replacement of telephone Wiring with twin core PVC insulated, PVC sheathed cable having single strand of 0.7 mm dia taped suitable for telephone wiring and making all necessary connections from terminal box to telephone socket, in and including concealed PVC conduit 20mm dia medium grade with all fittings & making good complete all as specified and as directed.
S&F in Replacement of Modular AC Socket with 25 Amp SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.
Supply and fixing in Replacement of LED ceiling/Recess light fitting 10 watt, in round shape, and making all electric connections complete all as directed.
S&F in Replacement of LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Material and labour in replacement for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, in and including concealed PVC conduit 25 mm dia medium grade with all fittings and 4.0 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to AC point complete all as specified. (Note: 2 RM of main wire, 1 RM of earth wire and 1 RM of conduit with fittings shall be measured as 1 RM)
Material and labour in replacement for Sub main wiring with 2 run of 10 Sqmm (nominal area) FR, PVC insulated, unsheathed andmultistranded copper conductor cable ISI marked, drawn in to existing PVC conduit with 10 Sqmm (nominal area) FR, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked as earth wire, connected with complete all as specified.
Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.
Supply and fixing in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as directed.
Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.
Supply and fixing in replacement of isolator 63 Amp, SPN type with over load and short circuit protection complete all as directed.
S&F in replacement of LED bulk head fitting 6.5 watt including making comfort alloy with opal glass diffuser , complete all as specified and as directed.
S&F in replacement of ventilatiing fan 200mm sweep 230 volt AC with & including louvers and all fixing arrangements complete all as specified & directed.
Supply and fixing of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps complete all as directed.
S&F of automatic hand dryer hot air dispenser with infrared sensor metal body with all accessories including all electrical connection complete complete all as specifed and as directed.
S&F of instant heating Geyser 03 litre capacity vertical type with steel tank and glass inner linen complete including fastners (2No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock complete all as specifed and as directed.
S&F of Wall Mounted Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES Yard store yard complete all as specified and as directed.
Supply and fixing ceiling fans complete with blades, down rods, electronic and accessories, 230 V, 1200 mm sweep with service value not less than 6.00 BEE. Five star rated with brushless direct current motor (BLDC).complete all as specified and as directed and depositing the old u/s to MES store yard.
M&L in replacement of LT underground cable XLPE insulated, PVC Sheathed armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 2 core ISI marked including all connections with thimbles of suitable size, complete all as directed.
M&L for sand cushioning to under ground cable provided with layers of snad(8 cms deep before laying the cable and 15 cms deep after laying) complete allas specified and directed at site by Engineer-in-Charge.
Supply and laying burnt bricks class - B for protection of cable complete all asspecified and directed at site.
S&F in Replacement of change over switch off load type, AC, 415Volts, TPN, 63 Amp side handle operated heavy duty in sheet metal enclosure, complete all as specified and as directed.
Supply and fixing 25 mm PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as directed.
S & F of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.
S & F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed.
Supply and fixing in replacement of Ventilating fan 250 mm sweep plastic body type including self cosing louver and making all electric connections complete all as directed.
S&F of Exhaust fan 450mm sweep single phase heavy duty ( inbuilt gril), fixed in wall with proper nuts & bolts as reqd and depositing the old u/s to MES store yard complete all as directed.
Supply and fixing of Geyser 25 ltr capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners for hanging and CP and PVC connection for water inlet ,outlet and depositing the old u/s to MES store yard complete all as directed.
S & F in repair of energy efficicent LED fittings 45W LED 6K suitable for builing security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.
Supply and fixing in street light fitting bracket, 01 mtr long made out of galvanized iron pipe of 25mm dia size light grade complete with nut, bolts, washer etc inclusive of one primer coat, complete all as directed.
Supply and fixing of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amp, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections complete all as specified and as directed.
Supply and fixing in replacement of MCCB 3 pole ,415 V Adjustable type 100Amp with breaking capacity 16KA. complete all as specified and as directed.
S&F in replacement of SPN Isolator, 40 Amp, 240 Volt. complete all as specified and directed.
Supply and fixing in replacement of galvanized iron pipe of 40mm dia size medium grade with all fittings ,complete all as directed.
M&L XLPE insulated armoured heavy duty electric cable with aluminium conductor ,1100 volt, size 6sqmm 2 core complete all as specified and as directed. .
M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with two coat of synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed
Taking down exhaust hooder fabricated out of PCZ sheet keeping in safe custody and refixing after repair work complete all as specified and as directed
Material and labour for earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground not less than 2.25 mtrs below ground level with top edge of plate not less than 1.5 mtr deep below normal ground level connected to galvinised earth wire 4 mm by means of nuts, bolts and check nut to earth plate and to main board or DB including necessary PCC 1:2:4 type B-1 pit, cover frame , GI pipe 15 mm dia light grade for protection and GI pipe 20 mm dia medium grade for watering with funnel, wire mesh, salt and charcoal dust all over the plate all as specified and as directed.
N.M. ASSOCIATES
Akhil Enterprises
Vipul Construction
HIND CONSTRUCTIONS
Keshav Brothers
SREE BABA TRADERS
imran construction company
M/S KAPIL ENTERPRISES
tarun construction co
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .