REPAIR, MAINT OF CERTAIN B/R WORKS OF OTM ACCN OF 536 ASC BN, ROU,MANDIR MARG, V.K LINE, 336 FIELD HOSPITAL, 56 ENGR REGT, 636 EME, PRO UNIT, ETC., IN AGE BR-II. AREA

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed..

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 but not exc 4 Sqm each complete all as specified and directed. .

Taking down shutters of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in concrete, brick work, masonry complete all as specified and directed.

M&L for PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregates complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed well bonded, bedded and solidly hearted built in cement mortor 1:6 including demolition of rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed.

M&L for precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded stone aggregates set in CM(1:4) in landings,kitchen platform, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including demolition of RCC in precast cover slab any thicknes (reinforced) complete all as specified and directed..

M&L for providing precast cement concrete louvers and jallies 35 mm thick, Type B-0 (1:2:4)(12.5 mm graded aggregate) set in cement mortar (1:4), (Measured solid), including all mouldings including dismantling of existing jallies of any description complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in cement mortar including dismantling of tiles with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and n. exc. 0.18 sqm (400 x 400 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 including dismantling of tiles with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per Srl item No. 17 above but in dado / skirting laid over and including 10mm thick rendering in CM (1:4) -ditto-

M&L for coloured non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed in CM(1:6) including dismantling of tiles with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per Srl item No. 19 above but in dado / skirting laid over and including 10mm thick rendering in CM (1:4) -ditto-

M&L for for glazed ceramic tiles of size 600mmx 300mm x 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado set and jointed in neat cement slurry and pointed in white/ coloured cement to match the colour of tiles laid over and including 15 mm thick rendering in CM 1:4 including dismantling of tiles with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for 600mm x 600mmx 8mm to10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 including dismantling of tiles with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

All as per Srl item No. 22 above but in dado / skirting laid over and including 10mm thick rendering in CM (1:4) -ditto-

M&L for mirror polished machine cut Kota stone slab flooring 18-20 mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of Kota stone slab with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for Kota stone slab 12mm to15 mm thick in skirting laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing including dismantling of Kota stone slab with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for 16mm to 18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs including dismantling of Granite slab/tiles with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed..

M&L for coloured designer tiles exterior grade ( ENDURA or equivalent make as approved by GE) 10 mm thick laid over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floorincluding dismantling of tiles with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block glossy finished chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 30 to 50mm stone dust cushioning including demolition of stone sett paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 40 mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregates, surface finished even & smooth using extra cement complete all as specified and directed..

S&F glass dividing strips, 3mm thick & inserted in position to conform to design width of strip 38 mm complete all as specified and directed..

M&L for cement concrete 1:3:6, type C-2 using 40mm graded stone aggregates as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound complete all as specified and directed...

M&L for 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor complete all as specified and directed..

M&L for plain cement concrete type D-2, 1:3:6 (using 20 mm graded stone aggregate) as in sub base complete all as specified and directed..

M&L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed..

M & L for rendering 20 mm thick cement plaster in cement mortar 1:6 on stone masonary / other than fair finished surfaces of brick wall finishing the surfaces even and smooth without using extra cement complete all as specified and directed..

M & L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / Concrete surfaces of finishing the surfaces even and smooth etc.

M&L for rendering 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) mixed with water proofing compound @ 2% by wt of cement complete all as specified and directed.. Note:- WPC shall be measured and paid separately

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed..

M & L for cement concrete 1:2:4, type B0 ( using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work complete all as specified and directed..

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed..

M&L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and directed..

M&L for applying two coats of synthetic distemper , white or tinted on new wall surface including preparation of surface complete all as specified and directed...

M&L for applying two coats of synthetic distemper, white or tinted on old wall surface including preparation of surface complete all as specified and directed...

M&L for applying two coats of exterior emulsion anti fungal paint on newly platered surface of walls incl preparation of surfaces with one coat of primer complete all as specified and directed. Note:-ACE or equivalent make as approved by GE

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F coloured Non Asbestos designer ceiling cement boards 4 mm thick including dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed

M&L for gypsum boards in suspended system ceiling as in flat or vertical step up or down pattern (GS-MFSC-4.1) comprising the following:- (a) GI perimeter channel of size 0.55 mm thick (having one flange of 20 mm and another flange of 30 mm and a web of 27 mm ) along with perimeter of ceiling, screw fixed to brick wall with partition with the help of nylon sleeves and screws at 610 mm centre to centre. (b) GI intermediate suspending channel of size 45 mm (0.9 mm thick with two flanges of 15 mm each) from the soffits ot 1220 mm centres with ceiling angle of width 25 mm x 10 mm x 0.55 mm fixed to soffits with GI cleat and steel expansion fasteners. (c) Ceiling section of 0.5 mm thickness having knurled web of 51.5 mm and two flanges of 26 mm each with lips of 10. 5 mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457 mm centres to centres, 12.5 mm tapered edge gypsum boards (conforming to IS 2095 –1982) is then screw fixed to ceiling section with 25 mm dry wall screws at 230 mm centres to centres. (d) Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. (e) The board are to be jointed and finished the tapered and square edges of the board with jointing compound, joint paper tape and applying two coats synthetic distemper over a coat of primer suitable for Gypsum board complete including dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed)

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs fixed with L-type or J-type or cranked hook bolts including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling and refixing Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed..

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern with guard film of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling old plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling old plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

M&L for second class hardwood in scantlings , timber clean sawn framed and fixed including dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed..

M&L for preparing surfaces of wood & wood based materials, new or old, of any description & girth, not otherwise described & treated with one coat of cresote complete all as specified and directed..

M&L for second class hardwood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

M&L for second class hard-wood clean sawn straight scantling area exc. 13 & n. exc. 25 sqcm each for fixing to existing chowkats with nails complete all as specified and directed.

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 using 20 mm graded stone aggregate and M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed

All per Srl item No 57 above but size 125mm x60mm -ditto-

S&F mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and as directed. [Single shutters of approx width0.8 to 1.2 m and ht 1.9 to 2.10 M.]

S&F steel window with side hung shutters with glazing bars dovetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.

All as per Srl item No. 60 above but without glazing bars -ditto-

S&F in replacement fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F in replacement glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83 x 44.45x 2mm mm , & lock rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45 x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS.

S&F in replacement aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F 35mm thick second class hardwood factory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed(with double or single shutter complete all as specified and directed.

S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); complete all as specified and directed

S&F second class hardwood factory made 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (with sash bars any numbers), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, for windows and ventilator all as per SSR Part-I clause 8.24 (b) complete all as specified and directed

S&F 30mm thick second class hardwood factory made glazed and skeleton shutters , open rebated and prepared to receive glass, guaze, etc.(without sash bars), edges of framing plain chamfered or rounded fitted with cut and metered beads for securing glass etc . size of members of shutters as specified in SSR-I , section-8, clause-8.24(b) complete all as specified and directed

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm prelam PVC sheet on back face complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.46 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in replacement second class hardwood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of new wooden surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm complete all as specified and directed.

S&F Mild steel barrel tower blots 100mm long, stove enamelled black, with bright bolt complete all as specified and directed

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed

S&F Mild steel pressed handles,150mm oval type, stove enamelled black complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300mm complete all as specified and directed.

S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed

S&F 75mm size butt hinges meadium weight , cold rolled MS and fixed complete all as specified and directed

S & F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws complete all as specified and directed

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in filling of hold fast etc, complete all as specified and directed.

Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M&L for preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described, & treated with tar or coal tar black paint complete all as specified and directed

All as per Srl item No 94 as above but treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc area not exc 0.1 sqm each complete all as specified and directed

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples, chains, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters;and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed.

S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F for Steel work in tubular trusses or post, perline and rafters, etc using tubes, pipes, hollow section complete all as specified and directed

Hacking out old broken glass (any tickness, size,quality or description) from wooden / steel framesglazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall including mild steel clamps complete all as specified.

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors complete all as specified and directed

S&F in repairs PVC (SWR) bends 75mm dia all as specified and directed.

S&F in repair PVC(SWR) vent cowl of 75mm dia complete all as specified and directed

S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed

S&F in repairs 25 mm dia aluminium powder coated droppery rod including brackets complete all as specified and directed

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed

Taking down and refixing 15mm bore GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections complete all as specified and directed

Taking down and refixing 20mm bore GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed

Cutting existing steel tubing for alterations or additions (Each cut measured) 15 /20 mm pipe complete all as specified and directed

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 15 /20 mm pipe complete all as specified and directed .

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia (Make prayag) complete all as specified and directed.

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed

S&F in repair C P bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

Supply and fixed in repair angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm- 90gm) complete all as specified and directed

S&Fin repair pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, fixed in repairs complete all as specified & directed.

S&F in repairs PTMT PVC grating of 100 mm dia complete all as specified and directed

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed

S&F in repair vitreous China WHB white flat back size 550x400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including Pors Trap, etc complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed

S&F in repair Brass CP bottle traps 40mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and directed

S&F in repairs Vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed

S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm complete all as specified and directed

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend etc. complete all as specified and directed.

S&F in repairs Tolilet paper holder, vitreous China white, box type to walls with CP (CP) brass screws complete all as specified and directed

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed

S&F in replacement rotational moulded three layered wall construction polyethylene water storage tanks 1000 ltrs capacity (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

S&F in replacement rotational moulded three layered wall construction polyethylene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

M&L for point wiring with 1.5 Sqmm PVC insulated FR, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC trunking of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead, colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor:-

For one light point or fan point controlled by one switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board all as directed by Engr-in-charge

All as per Srl item No 138.00 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated, unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-

M&L for concealed point wiring with 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqm cable as continuous earth lead, colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor:-

For one light point or fan point controlled by one switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per item No 140.00 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-

S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed .

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed .

S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed

S&F switch piano type flush, single pole, one way 5 A, 230 V complete all as specified and directed

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.

S&F switch piano type flush, single pole, one way 15 A, 230 V complete all as specified and directed.

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed.

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed .

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed.

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S&F in replacement concealed sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR , 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire, colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F in replacement surface conduit sub main wiring with two single core PVC FR insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit PVC trunking of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire, colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

S&F in replacement testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed

S&F in replacament TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.. Make:- ORIENT Cat Part No LBLN-18-C-AL, 4 feet/ Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

S&F in replacement LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed .Make - BAJAJ cat part No BIBWP10WLED /CG cat part No LBHE-10-CDL.

S&F in replacement box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed. Make ORIENT Cat Part No LBLN-10-C-SQ/Bajaj cat part No BCLSB10WH/ CG Cat par No LCTL-9-CDL.

S&F PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site complete all as specified and directed

S&F PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed.

M/s Mohan Singh

maharaja construction and suppliers