Improvement and Green Space Development of Park, Childers play material and out door GYM Equipment at Poonga Street Park in Ward No 70 in Zone-5

Amount

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Providing Stainless steel entrance name board 20 feet x 3 feet size board SS stand pipes from gl to 15 feet hight aluminium composit pannel leteer board and fixing in metal letters 12inches hight including cost and conveyance of all materials fabrication charges and all labour charges and foundation arrngements ec complete

Supply and fixing of Ornamental light Post 20 feet length with gradually reduce type pole 3 stages using 75mm and 50mm size and 25mm and bent up on top edge with 30w LED fitting including fibre connection junction box interial wiring works on each pole including cost of light fitting foundation works Complete

Supply Delivery and Fixing of 30w LED fitting including fibre connection junction box interial wiring works on each pole including cost of light fitting foundation works Complete

Supply, Delivery and Providing Three Seater back slope Granite stiff sitting benches 5 feet in length 1.50 feet width 600x450x100 mm size Hard Granite slab side walls, 150x45x100 mm size bench slab back slope slab including cost and conveyance and fixing in position etc complete

Supply and delivery of FRB Solid waste bin 1 m hight Animal and Bird Models including cost and conveyance and all handling labour charges etc complete

Supplying and fixing of Double Swing of height 2.40m height with 40mm dia MS pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers

Supplying and fixing of slide for below 12 years old childrens to a length of 3.00 m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of moulded plastic. The ladder frme is made up of 25mm M.S. ppe., hanrail 20mm dia MS pipe and the centre support is 80mm dia MS pipes. The cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of Rocking Swing of 40mm dia GI pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supplying and fixing of family Swing with shelter of 40mm dia GI pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Single Twister Sitting Twister- Outdoor Gym Equipment Maximum User Weight of 100 kilogram, Main Central Pipe & Main Frame Pipe of 100mm dia G.I. Pipe with 3.6mm Thickness Standing/ Sitting Twister Frame Pipe 32 mm G.I. Pipe 32 mm dia with 3.2mm Thickness, Disk Support Pipe at Bottom Pipe 80 mm dia G.I. Pipe, Rotating Disk Support, Handle Frame Pipe 32mm dia G.I. pipe Thickness with 3.2mm Thickness,Foundation Pipes 750mm deep GI pipe, supported with M.S. Angle 25 X 25 X4mm of Foundation Pipe 100mm with 3.6mm Thickness,Ball Bearing Foot Rest Aluminum casting material inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Rower Maximum User Weight 120 kilogram, Main Central Pipe 100mm dia G.I. Pipe Heavy, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, 32mm dia G.I. Pipe, Connecting Links Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 12 millimeter 750mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm Seat and Back Rest 2.5mm thick, M.S. Perforated with uniformbending radius to avoidsharp edges Bearings Tapered Roller Bearing inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Air Walker/ Stroller Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Chest Press SINGLE for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Supply and fixing of Leg Press Single Maximum User Weight 100 kilogram, Main Central Pipe 80mm dia G.I. Pipe, Moving Frame Pipe 80mm dia G.I. Pipe, Foot Rest Frame/ Foot Rest Hinging Pipe 25mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm, Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers.

Lattering and Painting Emblem in accordance with the size and specifications as approved by the Board on the compound wall including cost of all consumables, one coat of base paint charges including cost of all materials and labour charges etc complete

Repair and Painting Work Damaged Play Materials including Labour charges etc to Complete

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 750 X 750cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.

Lakshmipathy (BID ID -1175078)

KHALSA EXPORTS PRIVATE LIMITED (BID ID -1175046)