REPAIR TO JOINERY, FALSE CEILING AND ALLIED WORKS IN OLD PROJECT AREA AT AF STN MANAURI

Amount

Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed.

M&L brick work with sub class "B" old size bricks, straight or curved on plan exec 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster or cement lime plaster on brick or stone walls etc.Including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick in cement plaster 1:4 with WPC (@ 3%by weight of cement) on fair faces of brick work or concrete surface finishing the surface even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured & paid seprately.

M&L for preparing new suface and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L rendering 15 mm thick in cement plaster 1 : 6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces and applying 2 coats of OBD over a coat of primer complete all as specified and directed.

Taking down chowkhat with shutter without taking off shutter from chowkhat not exceeding 1.5 Sqm each complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinge with steel handle and steel peg stay, with glazing bars, dovetailed or welded complete all as specified and directed.

Taking down Shutters of any description n exc 1.00 sqm each complete all as specified and directed.

S&F Steel ventilator with top hung/Side hung shutter including hinges, steel peg stay, complete all as specified and directed.

Taking down Shutters of any description exc. 1.00 sqm but n. exc. 2.00 sqm each complete all as specified and directed

S&F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and complete all as specified and directed.

Taking down chowkhat with shutter without taking off shutter from chowkhat but exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed.

S&F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Taking down Shutters of any description exc 2.00 sqm each complete all as specified and directed.

S&F 35 mm thick 2nd class hard wood glazed and skelton door shutter, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for scuring glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, ection 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F 30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both side fixed to chowkhat all as specified and directed .

Dismantling wrought iron or mild steel work of any description (i.e. wind tie etc) not otherwise provided for etc complete all as specified and directed.

S&F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 -W (Gde- E- 250) quality- A with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete all as specified and directed.

S&F Mild steel framed work such as window grills or guard bars, with ends of bars shouldered and or riveted or forged in to spikes, framed guard bar and similar work confirming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F 1.25 mm thick Mild Steel Plain, black sheet in Chullah hood, covering to door shutters, ducts, etc., cut to size, holes punched including fixing to MS clamps with necessary bolts and nuts complete all as specified and directed.

S&F powder coated aluminium doors frames and shutters fixed or side hung including jointing cleat for fixing including all fittings like handles, locks, hinges, stoppers, latches etc as specified in Drg No: CE (AF)/NGP/03/TD/32, Sheet 1 to 2/2 complete all as specified and directed.

S&F powder coated aluminium grills of approved design and pattern, with approved standard section fixed to the window frame complete all as specified and directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and complete all as specified and directed.

S&F rubber beading size 65x5 mm for Doors complete all as specified and directed.

M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F Pressed steel frames for door frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed.

S&F Pressed steel frames for door frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 12.5 mm graded crushed stone aggregate) for fiiling of hollow section complete all as specified and directed.

M&L PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) for fixing of hold fast etc complete all as specified and directed.

S&F Butt hinges, 100mm, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles, anodized 150 mm size complete all as specified and directed.

S&F Aluminum Barrel tower bolt 150mm complete all as specified and directed.

S&F aluminium anodised 300mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type complete all as specified and directed.

S&F in replacement stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F in replacement 100 mm Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers & complete all as specified and directed.

Hacking out old broken glass from metal frame including punching or drilling out old glazing complete all as specified and directed.

M&L for 4mm thick plain sheet glass ordinary quality including glazing with putty/rubber gasket area n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F sheet glass, 3 mm thick ordinary quality and glazing with oil putty complete all as specified and directed.

M&L Running welding in repairs thickness of metal to be welded n exc 6mm thick complete all as specified and directed.

M&L spot welding in repairs n. exc. 2.5 cm in lenghth, thickness of metal to be welded n. exc. 6mm thick complete all as specified and directed.

S&F in reapirs Aluminium(Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in replacement 300 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for preparation of new wooden surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed.

M&L for preparation of new Steel surface of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

S&F in replacement mild steel chromium plated curtain rod 25 mm dia on SS brackets and fixing with decorative side finials both ends etc complete all as specified and directed.

S&F in replacement MS steel window peg stay stove enamelled for supporting windows shutter complete all as specified and directed.

S&F in replacement MS steel window handle left/right including necessary welding for windows shutter complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) any thickness, including cover fillets etc complete all as specified and directed.

S&F ceiling 4mm thick Non asbestos fibre cement building boards only and including two coat of white wash, complete all as specified and directed.

S&F gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed.(except grids)

S&F in replacement gypsum board 12mm thick in ceiling over and including anodised aluminium snap grid frame work for false ceiling, size of grid 605 x 605mm complete all as specified and as directed.

M&L for preparation of ceiling surface and applying two coats of OBD over a coat of putty as required and complete all as specified and directed.

S&F cement building board/designer E-Board only with all finishes size 595 x 595mm fixed in ceiling required complete all as specified and directed.

S&F grid false ceiling in GI system powder coated prelude main runner section 38 x 24 x 0.40mm, cross 'T' 28 x 24 x 0.40mm, wall angle 24 x 24 x 0.40mm and including providing and fixing 4mm thick non asbestos fibre fire resistant cement building board/designer E-Board with all finishes size 595 x 595mm fixed in ceiling frame work with all necessary hanging washers, expansion holding fasteners etc for securing framework to ceiling wherever required complete all as specified and directed.

Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri

RK Enterprises

HIMANSHU TRADERS