Labour charges for providing foundation plinth for all structure and equipments, supply fabrication and erection of RSJ poles for enhancement of 230/110KV Auto Transformer capacity from 3X 50MVA to 2X100MVA (Second unit) at 230/110KV Karaikudi SS

Amount

Clearing the site with scrub jungle( AS per the PWD Schedule of rates - to be done by contractor)

Ordinary soil Earth work excavationg and deposting on bank with initial lead of 10m & initial lift of 2M in sand, slit or other loosesoil, wet sand or Slit not under water, light balck cotton soil, sandy loam and ordinary soil including excavated earth

Earth Excavating depositing on bank with an initial lead of 10m and lift of 2 m inSoft Disntegrated rock, latterite soft rock or kankar not requiring blasting.

Earth excavating, deposting on bank with an initial lead of 10m and lift of 2 m in medium rock and dense medium rock not requiring blasting

Removing hard rock by weding chiseling and trimming to proper shape where blasting is prohibited

PCC 1:3:6 using 40mm HBS jelly including cost of all materials, lead, lift, etc, complete without form work.

PCC 1:3:6 using 40mm HBS jelly including cost of all materials, lead, lift, etc, complete with form work.

PCC 1:2:4using 20mm HBS jelly including cost of all materials, lead, lift, etc, complete with form work.

Plastering with CM 1:3, 12 mm thick including cost of all materials, lead, lift, curing etc., complete.

Labour charges for painting of RCC poles, plinths of structure etc., with two coats of snowcen over one coat of white cement including cost of paint and other material, lead, lift, curing etc., complete.

Labour charges for providing /placing grouting bolt by template for breaker/230 or 110KV C.Ts structure foundation as directed by the field engineer.

Labour, machinery, consumables for the Fabrication for stell structures. Heavy section (14kg/m and above)

Labour, machinery, consumables for the Fabrication for stell structures. Light section (Below 14kg/m)

Labour for the Erection of the Fabricated stell structures Heavy section (14kg/m and above)

Labour for the Erection of the Fabricated stell structures Light section (below 14kg/m)

Supply of paint of reputed make and Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint including consumables, after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer .

Supply of paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour for Second coat of Painting using Aluminium paint including consumables.

Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs &2.5inch dia for 2mtrs)including single/double fitting fixing arrangements,1 inch dia B class pipe arms,yard light box fixing flat and one coat of redoxide and Two coat of Aluminium paint.

Supply and Erection of yard light fuse unit mounting box of size 200X200X150mm (BXHXD) out of 18 SWG(1.22mm) G.I shet as per drawing provided with 16/20A rewirable Prorceian Fuse carrier unit, 16A Bakalite connectors including its cost material, consumables, GST, Fright, etc and as directed by the field Engineer on the site requirments,(The Box shall be vermin proof, shall be provided with sturdy hings with provision for cable entry and looking arranments.

Supply and Erection of 1x72W or 2x36W, 240V LED street light Aluminum case fitting ISI- Make as per direction of site engineer.(inclusive of all taxes).

Labour charges for laying of control/ yardlight cable by digging cable trench of size 0.3mX0.6m filling with for a depth of 0.2m, covering with one layer of country bricks and refilling with excavated earth and including cost of sand and bricks,etc.

Labour for Dismantling of Breaker using crane arranged by the Contractor including the cost consumables 110 KV Breaker

Labour for Dismantling of Breaker using crane arranged by the Contractor including the cost consumables 230kV Breaker

Labour for Dismantling of Measurement transformers, reactor units, using Crane arranged by the Contractor including all consumables. 110 KV CTS

Labour for Dismantling of Measurement transformers, reactor units, using Crane arranged by the Contractor including all consumables. 230kV CTs

Labour for Dismantling of LAS station/Distribution type single unit including monitos, accessories & consumables. 230 KV LAS

Labour for Dismantling of Isolators including accessories and consumables. 230 KV without Earth - Motor operated

Labour for Dismantling of Isolators including accessories and consumables. 110 KV without Earth

Labor for Dismantling of Jumper/Droppers using Moose/Zebra/panther Conductors including consumables.

Labor for Dismantling of Jumper/Droppers using Moose/Zebra/panther Conductors including consumables with LC 30%

Labour for Dismantling of Busbar including consumables. 75 mm (1 length)

Labour for Dismantling of Busbar including consumables. 75 mm (1 length) with LC 30%

Labour for Dismantling of Insulator single pole stack for supports/Underhang including consumables. 230KV

Labour for Dismantling of Insulator single pole stack for supports/Underhang including consumables. 110 KV

Labour for Dismantling of Strung bus including insulators, hardwares, fittings, clamps and consumables, 230 KV Single Conductor Strung Bus

Labour for Dismantling of Strung bus including insulators, hardwares, fittings, clamps and consumables, 230 KV Single Conductor Strung Bus with LC 30%

Labour for Dismantling of Strung bus including insulators, hardwares, fittings, clamps and consumables,230 KV Double Conductor Strung Bus

Labour for Dismantling of Strung bus including insulators, hardwares, fittings, clamps and consumables,110 KV Single Conductor Strung Bus

Labour for Dismantling of Control Panels includings consumables. Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/Relay Panels of Grid type (P&C)

Labour for Dismantling of cables from duct/trench/structures etc. Up to 8 Core

Labour for Dismantling of cables from duct/trench/structures etc. Above 8 Core

Supply of steel Items as per TNEB specification including coat of material, loading, transporting, unloading and delicery at site, complete, 200x100 mm RS Joists

Supply of steel Items as per TNEB specification including coat of material, loading, transporting, unloading and delicery at site, complete, 50X50X6 mm M.S Angle

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

C ILANGAMANI