Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹6.5 L+₹1.3 L (25.0%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹7.2 L+₹2.0 L (38.9%)Rejected-Finance | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹8.1 L+₹2.9 L (55.7%)Rejected-Finance | L4 | Rejected-Finance Other than lowest bidder |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
21 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jammu
Air Force Station Jammu
CA NO GE/AFJ-25/2022-23 PERIODICAL SERVICES TO CERTAIN OTM BLDGS AT TECH AREA AND KALUCHAK AT AFS JAMMU UNDER GE (AF) JAMMU
2022_MES_553404_1
CA NO GE/AFJ-25/2022-23
Open Tender
Civil Works
Item Rate
330 days
Jammu
As per tender documents
8 documents required · 8 mandatory
₹500
GE (AF) Jammu
₹20,000
Yes
23 Dec 2022
21 Sept 2022
24 Oct 2022
21 Sept 2022
21 Oct 2022
7 Oct 2022
Amount
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed.
Brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.
M&L for except brick work with old size bricks, using old serviceable bricks, as retrieved from dismantling of brick work under respective item, after removing mortar from and cleaning bricks; straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
Taking down cement plaster on brick/concrete surfaces etc including racking out joints, hacking for keys and scrubbing down with water etc and removing all debris to a distance exc 50 mtr but not exc 100 mtrs complete all as specified and directed.
Rendering 10 mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), complete all as specified and directed by Engr-in-charge.
Rendering 15 mm thick on other than fair faces of brick work/stone wall or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), including mixing of liquid water proofing admixture as per manufacturer's instructions complete all as specified and directed by Engr-in-charge. Note: Supply only liquid water proofing admixture shall be measured and paid separately under relevant item of this BOQ
Supply only liquid water proofing admixture @ 0.20 litre per bag of cement complete all as specified and directed by Engr-in-charge.Make : Fosroc Conplast / Nitoband SBR/Pidilite/Asian
Complete removal of exisiting treatment and applying two coats of oil bound distemper on walls over and including one coat of Birla white ware care putty and a coat of primer (as per manufacturer's instruction of plastic emulsion paint) complete all as specified and directed by Engr-in-charge.
Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper, over a coat of primer (as per manufacturer's instruction) over and including one coat of Birla white wall care putty complete all as specified and directed by Engr-in-charge.
M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.
Preparation of old surfaces of ceiling by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply one coat of white wash to ceiling complete all as specified and directed by Engr-in-charge.
Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply one coat of white wash to walls complete all as specified and directed by Engr-in-charge.
Preparation of old/previously decorated unplastered or plastered surfaces of wall/ceiling/roof and Writing Stops, commas, short lines, dashes, hyphens, brackets, etc. with one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and applying one coat of distempering with oil emulsion distemper white or any tinted on walls, filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, complete all as specified and directed by Engr-in-charge.
Preparation of newly plastered surfaces of walls and applying two coats acrylic Smooth exterior paint of required shade : New Surfaces (Two or more coats applied @1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) with like wall roof projection facias, chajja etc all as per manufactures instructions all as specified and directed by Engr-in Charge.
Complete removal of exisiting treatment Finishing walls with acrylic Smooth exterior paint of required shade : Old Surfaces (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over one coat of birla white wall care putty on wall roof projection facias, chajja etc all as per manufactures instructions all as specified and directed by Engr-in Charge.
Preperation of old plastered wall surfaces and applying one coat of acrylic Smooth exterior paint of required shade over one coat of exterior primer applied @0.835 ltr/10 sqm complete all as specified and directed by Engr-in Charge.
M&L for preparation of old decorated wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
M&L for preparation of old steel surface of any discription over 10 cm width or girth not otherwise and applying one coat of synthetic enamel paint complete all as specified and as directed.
Preparation of old decorated surfaces of steel or iron works of any description exc 10 cm over width or girth and applying one coat of synthetic enamel paint, in camouflaging pattern/sigma pattern (with RGB value of each bldg as approved by user) complete all as specified and directed by Engr-in-charge.
Preparation of old/previously decorated unplastered or plastered surfaces of wall/ceiling/roof and applying one coat of "AQUA Crete Paint" complete all as specified and directed by Engr-in-charge.
Preparation of old/previously decorated unplastered or plastered surfaces of wall/ceiling/roof and applying one coat of "bituminous paint" complete all as specified and directed by Engr-in-charge.
Material and labour as in repairs for mild Steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed by Engineer-in-Charge.
S&F in repair 110mm bore, PVC (RWP) pipes, pressure rating 4 kg/sqcm, single or double socketed, in any length with rubber ring joints, fixed to wall with clamps, (work to be commenced upto 30 metre height), complete all as specified and as directed by Engr-in- Charge.
S&F in repair PVC (RWP) bend and shoe, any radius, for 110 mm bore pipe, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.
Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.
3.00mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exc 0.5 Square metre in each pane etc complete all as specified and directed.
S&F for 3.00mm thick figured type pin headed glass sheet ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exc 0.5 Square metre in each pane etc complete all as specified and directed.
5mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exc 0.5 Square metre in each pane etc complete all as specified and directed.
S&F for 5mm thick figured type pin headed glass sheet ordinary quality and glazing with oil putty/ wooden beads with nails in square n.exc 0.5 Square metre in each pane etc complete all as specified and directed.
Securing glass of any description in existing wooden frames glazed with oil putty/beads including removing loose or decayed putty/beads, painting/oiling one coat of rebates, grooves, reputtying and painting/oiling puttied surface to match with existing work (New length of frame reputtied shall be measured) ) complete all as specified and directed by Engr-in-charge.
Disconnecting existing tanks capacity of tanks exc 250 Litre and n.exc 500 Litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge.
Disconnecting existing tanks capacity of tanks exc 500 Litre and n.exc 1000 Litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge.
Preparation of old/previously decorated unplastered or plastered surfaces of wall/ceiling/roof and Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.
Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge in the Air Force station area
Rakesh Kumar Malia
JK BUILDERS AND DEVELOPERS
M/S Shesh Paul Gupta
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .