SPECIAL REPAIR TO BLDG NO E-85 AND E-86 OTM ACCN AND PROVN OF GARBAGE BIN AT ARTY CENTRE UNDER AGE B/R-I OF GE GOLCONDA

Amount

Dismantling AC/Galvalume/GI Sheets (corrugated, semi corrugated etc) as in roof coverings etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed

S & F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

M&L pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, ridges, gutters, fixed with self tapping screws complete all as specified and directed

S & F for MS framed structure roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Excavating post holes or similar holes, each not exc 0.5 Cum, getting out in hard/dence soil, returning, filling and ramming earth and broken rubble mixed with earth around , in layers not exceeding 25cm, watering and removing surplus soil complete all as specified and directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in foundation filling, mass concrete and similar works complete all as specified and directed

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and removing from site of work complete all as specified and directed.

Taking down cement plaster on wall of any description including racking out joints for key, scrubbing with water etc. complete all as specified and directed.

M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement and including preparing newly plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed. Note: IWPC measured and paid separately.

Supply only integral water proofing compound (BIS Mark)

M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement including prepation of newly plastered surfaces of wall and two coats of oil bound distemper over a coat of alkali resistant primer on wall complete all as specified and directed.

M&L for Random rubble masonry built in cement Mortar 1:6 uncoursed, well bonded, bedded and solidly hearted complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts wells, cesspits, manholes, pier holes etc not exc 10sqm on plan and getting out in hard/dense soil complete all specified and directed.

M&L Returning, filling in, inclu spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and directed.

M&L for removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Supply and spread approved M-Sand / Robo Sand for cable laying /foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as all as specified and directed.

M&L brick protection with common burnt bricks sub class ‘B’ of size 230 x 115 x 75mm for cable protection complete all as specified and directed.

S&F galvanized steel water tubing light grade of 40mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions for cable protection complete all as specified and directed.

Material and labour Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all specified and directed.

M&L for hold fasts Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made slidings bolts; clamps; hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 GDE E-165 complete all specified and directed.

Raking out joints,hacking for key, scrubbing down with water, and Flush pointing to squared rubble masonry, coursed or uncoursed in CM 1:4 complete all as specified and directed

Material and labour Preparation of old painted steel surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

S&F for Butt hinges,100mm medium weight, cold rolled mild steel, and fixed complete all as specified and directed

Supply and fix Galvanised wire netting 0.71mm dia size of mesh in 12mm fixed with nails on concrete surfaces complete all as specified and directed

Surface excavation n exe (not exceeding) 30 cm dep and averaging 15 cm deep and getting out soft/ loose soil complete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass Concrete complete all as specified and directed.

M&L for factory made solid precast cement concrete block Type C1 1:3:6 grade blocks of approved size shape and dimensions as in kerb stone set in CM 1:4 etc complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete walls finished the surface even and fair without using extra cement and including preparation of newly plastered walls surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L Moorum / red bajri filling in floors or paving, laid in layers n exc. 15 cm thick, spread, leveled & rammed including watering complete all as specified and directed.

M&L Screed bed or bedding layer of mortar 15mm thick for laying floor finishes CM 1:6 complete all as specified and directed.

Cutting holes in brick walls Exc half brick but not exc one brick in cement mortar for inserting holdfasts & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed.

S & F Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet 1.60 mm, etc complete all as specified and directed.

Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone/brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

All as per item No.39 but One 5 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed

All as per item No.39 but One 5 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed

All as per item No.39 but for One 5 pin 15 / 16 Amps switch socket outlet point on independent board with 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed

S&F Switch socket outlet combination universal type 2 in 1, 2 and 3 pin 5Amps piano flush type, 240 Volts complete all as specified and directed

S&F Switch socket outlet combination universal type 2 in 1 and 3 pin 5 and 15 Amps piano flush type, 240 Volts complete all as specified and directed

S&F lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed

S&F Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed.

S&F for LED Tube light fitting 20W, 220W, AC, decorative box type with driver, and holder including LED Tube light and including connecting up with three core flexible PVC copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F for RCBOs SPN 32 Amp, 240Volts, 50Hz AC supply complete all as specified and as directed.

Supply and fixing LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F Sheet metal enclosure MCB distribution board including suitable rated bus-bar single pole and neutral 240V, 8 Ways, IP-43 double door complete all as specified and directed.

All as per item No. 52 above but SPN 12 way double door complete all as specified and directed at site.

Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6.00 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for concealed type and making good the disturbed wall surfaces to match with existing specification all as required at site complete with all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 Sq mm x 3.5 core complete all as specified and directed.

All as per Item No.57 but 70.00 Sqmm x 3.5 Core

Supplying, installing, commissioning and testing in repair factory made outdoor type LT Kiosk box with canopy of size 750mm x 500mm x 450mm made out of 3.15mm thick CRCA sheet duly power coated and locking arrangement with 4 Nos 200 Amps aluminium busbar and 4 nos aluminium lugs of size 40mmx5mm of length 75mm including grouting in PCC (1:4:8) type D-2 and taking down old unservicable LT Kiosk Box complete all as specified and directed.

S.R.M.K Enterprises (BID ID -3133961)

Sri Lakshmi Enterprises (BID ID -3133595)

STANDARD AGENCIES (BID ID -3133167)

BHATNAGAR ASSOCIATES (BID ID -3132732)

NAVANAND ENTERPRISES (BID ID -3133335)

VACON INFRASTRUCTURES (BID ID -3133555)