Development of Malagalu Burial Ground at ward no 2 Kanakapura CMC limits

Development of Malagalu Burial Ground at ward no 2 Kanakapura CMC limits

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per d...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) ...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (I. No 5.1.4 P. No-9 of PWD & IWTD, Vol-2 SR 2023)

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with su...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, ty...

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel ...

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and f...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and rem...

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of

unserviceable...

Removal of stumps and roots including backfilling with suitable material to required compaction Girth from 300 mm to 600 mm (I. No 2.2 b i, P. No-9 of PWD & IWTD, Vol-3 SR 2023)

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and ...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to m...

Wet Mix Macadam (Plant mix method Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical m...

Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...

Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, ...

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge (I. No 19.2.1 P. No-187 of PWD Vol...

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (Pg.no:117, I.no: 13.5.3 VOL-2 of PWD SR 2023-24)

Development of Malagalu Burial Ground at ward no 2 Kanakapura CMC limits

PSCC Pole - 8 Mtr Long, 140 Kg WL(Dwg No. BESCOM/GM/QS&S/17 Dtd 24.11.2018) as per REC Standards (P.No.03, I No.1.04 in ESCOMs SR 2023-24)

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing.(P.No.43, I No.1.1.1 in ESCOMs SR 2023-24) (LABOUR COST)

Erection of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth.(P.No.44,I No.2.02 in ESCOMs SR 2023-24) 9LABOUR COST)

1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995.(P.No.18, I No.42.09 in ESCOMs SR 2023-24)

Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3 95) (Phase Conductor) (1 70) (Insulated Messenger Neutral) (1 25) (Street Light Control) (P.No.54, I No.24.04 in E...

Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations.(P.No.18, I No.43.01 in ESCOMs SR 2023-24)Suspension Clamp suitable for insulated Messsenger wire of size 25 to 95 Sq...

Erection of Suspension Clamp - 25 to 95 Sqmm bare/Insulated messenger (P.No.54, I No.24.06 in ESCOMs SR 2023-24) (LABOUR COST)

Piercing Connector Suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connection (P.No.19, I No.43.12 in ESCOMs SR 2023-24)

Installation of Insulation piercing connector for Main to Street Light Main : 16-95 Sqmm, Tap: 1.5-10 Sqmm (EP95).(P.No.54, I No.24.12 in ESCOMs SR 2023-24) (LABOUR COST)

Guy Clamp - GI.(P.No 05, I No.5.10 in ESCOMs SR 2023-24)

Turn Buckle (GI)(Dwg No. BESCOM/GM/QS&S/07 Dtd 24.11.2018). (P.No 05, I No.5.11 in ESCOMs SR 2023-24)

Anchor Rod using 12 mm rounds/Guy Rod - GI. (P.No 05, I No.5.13 in ESCOMs SR 2023-24)

GI Fish Plate.(P.No 05, I No.5.15 in ESCOMs SR 2023-24)

Digging of Pit for GUY SET. (P.No 44, I No.1.7.1 in ESCOMs SR 2023-24) (LABOUR COST)

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antiglare clear diffuser with Injection moulded poly...

Supplying and Fixing of........mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket streetlight fitting of all capacities to GI or GI or rail or RCC pole/wal...

Supplying of.....feet-PVC Batten with integrated LED tube....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80.Power Input :220-240V 50/60 Hz & Power f...

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twint wisted PVC insulated wires, required Nos ...

Fixing all types and all capacities of fluorescent/false ceiling/spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twint wisted PVC insulated wires, required Nos ...

Supplying heavy gauge PVC conduit pipe.......dia.......mm thick confirming to IS 2509 with suitable size bends,junction boxes,adhesive paste etc,and fixing using inverted wood plugs in case of RCC cei...

Three outlet in a row,above 6Mts upto 10Mtr from tapping point to out let via switches. (P.No 05, I No.2.1.5 in PWD Ele SR 2023-24)

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.Cwall,including necessary rawl plugs, Machine/NF ...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting backplate with required nos.of machine screws,boltsnuts etc.,complete on the existing metal/...

Supplying and fixing regular MCB distribution boards onwall/woodboard/flush mounting using required clamps,bolts,nuts etc.,with provision for fixing suitable type capacity MCB's single phase/3phase/si...