Tender ID

Karnataka

AOC

Works

Buildings

Proposed Construction of Madivala Samudaya Bhavana at Beluru Town in Belur Taluk.

Public Works Department

PWD Division Office Hassan | Hassan, Karnataka

Amount: ₹84.4 LCloses: 1 Apr 2026Closed

Timeline

Published16 Mar 2026
Closed1 Apr 2026
Awarded—

Bids

1 Bid1 Apr 2026

#	Company	Amount	Status
1	CP RAVISHANKAR CONSTRUCTIONS LLP ₹88.6 Laccepted-aoc	₹88.6 L	accepted-aoc

Tender Value

₹84.4 L

EMD Value

₹84,400

Closing Date

1 Apr 2026, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Bharath K S

Office Number

Work Description

Proposed Construction of Madivala Samudaya Bhavana at Beluru Town in Belur Taluk.

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT33477

Reference Number

PWD/2025-26/BD/WORK_INDENT33477

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Division Office Hassan

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredKPWD Class-III and above Registration Certificate

RequiredContractors has to upload the EPF Registration

RequiredAnnual Turnover Certificate certificate issued by Approved Chartered Accountant with UDIN i.e., 2020-21,2021-22 , 2022-23, 2023-24 and 2024-25 as per KW-3 Rs.84.40 Lakhs

RequiredAny Construction work done certificate as per KW-3 i.e., Rs.21.10 Lakhs certificate should be issued not below the rank of Executive Engineer

RequiredLine of credit as per KW-3 Rs.25.32 Lakhs

RequiredQuantities of Work 1.Earthwork -403.00 Cum 2.PCC/RCC-206.00 Cum 3.Steel-10.54 Tonne 4.Solid concrete block- 254.00 Sqm 5.Plastering-667.00 Sqm 6.Flooring-20.00 Sqm 7.Painting-652.00 Sqm

RequiredAssessed available tender capacity-AxNx5 -B should be greater than or equal to Rs.84.40 Lakhs

RequiredThe contractor belonging to Category-IIA should upload Caste Certificate issued by the Competent Authority of Government of Karnataka

RequiredThe contractor belonging to Category IIA shall be domicile of the State of Karnataka for more than 10 years Should upload Certificate issued by Competent Authority of Government of Karnataka

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any StateGovernment/ Government of India/ Union Territory

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder. The Tender processing fee shall not be refundable.

The employer reserves the rights to reject one or all Tender without assigning any reasons and Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for these costs

The employer is not responsible for any delay in accessing E-Procurement Portal

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Government order LD/300/LET/2006 Bangalore dated 1.01.2007 nad Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund

Successful bidder has to furnish 0.1% of award contract amount as insurance during entering in to agreement.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval and all the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise tender will be rejected.

Materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work.

Contractors should be registered with KPWD Class III and above Registration

To qualify for award of this contract, each tenderer should give all details and documents as per K.W-3 and Work should be carried out as per K/W-3 STD attached with tender .

The period of completion of this work is 9 Months & the eligible contractor should maintain the work for ONE YEAR after the successful completion of the project.

Contractors has to upload the EPF Registration and Contractors has to submit their labour EPF details with every Running Bill. Contractor shall bound to comply the prevailing rules and regulations with regard to the EPF Contribution rules and any modifications thereof before and after execution of agreement

Estimate rates are excluding GST as per govt Circular No:FD 417 Exp-12/2024, Banglore Dtd:09.08.2024 and prevailing GST (18% of amount put to tender) amount is kept in form of Lumpsum in sanctioned estimate. Therefore amount put to tender and ECV amount are excluding GST. But the itemwise rates do not include GST. Hence GST will be paid separately for the quoted amount accordingly.

The GST shall not be paid in the extended period of contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time. The Government and the Contractor are abide to any increase or decrease in GST during agreement period

The FSD deducted in RA Bills will be refunded only after the successful completion of Defect Liability Period.

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured according to ENVIRONMENTAL MANAGEMENT SYSTEM (EMS ISO 14001:2015) & QUALITY MANAGEMENT SYSTEM (QMS ISO 9001:2015) Policies, so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum, the contractor should make all efforts to validate and to get additional data if required at his own cost.

Contractor should take all precautions to ensure that no damage is caused to the existing public/ private properties which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project.

The Contractor should upload original scanned copy of Purchase invoice/RC Book/Sale Deed duly attested by Notary along with original purchase invoice/Ownership transfer in RC book/Hire or Lease Agreement duly attested by Notary along with original purchase invoice or RC book

Contractors are responsible for ensuring Safety and also whole & Sole responsibility for any injury or risk factors of workers

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the bid document (Section-3 Clause 1.10) only. Otherwise tender is liable for rejection.

The contractor belonging to Category-II A should upload Caste Certificate issued by the Competent Authority of Government of Karnataka

If the contractor is a firm, then all the partners or members of the firm shall belong to the Category-II A as the case may be

The contractor belonging to Category-II A shall be domicile of the State of Karnataka for more than 10 years(Should upload Certificate issued by Competent Authority of Government of Karnataka).

Technical Criteria

Past Experience

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2020-21,2021-22 , 2022-23, 2023-24 & 2024-25 (b) Mandating Satisfactorily completion as prime contractor, for atleast any construction work to an extent of value not less than Rs.21.10 lakhs (Updated to 2025-26 Price Level) (usually not less than 25 percent cost of the work)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

ITT Clause 3.2 (c)Executed in any one year i.e., 2020-21,2021-22,2022-23,2023-24 & 2024-25 the following minimum quantities of work 1.Earthwork -403.00 Cum 2.PCC/RCC-206.00 Cum 3.Steel-10.54 Tonne 4.Solid concrete block- 254.00 Sqm 5.Plastering-667.00 Sqm 6.Flooring-20.00 Sqm7.Painting-652.00 Sqm(usually 50 percent of peak annual rate of construction)

Others -- Certificate issued from the competent authority not below the rank of Executive Engineer

The tenderer or his identified sub contractor should possess required valid electrical license for executing building electrification works and should have executed similar works totaling Rs.0.85 lakhs in any one year during last five years i.e., 2020-21,2021-22 , 2022-23, 2023-24 & 2024-25 (Updated to 2025-26 Price level)

Others -- certificate issued from the competent authority not below the rank of Executive Engineer

The tenderer or his identified sub contractor should possess required valid license for executing building water supply/ sanitary works and should have executed similar works totaling Rs 0.47 lakhs in any one year during last five years i.e., 2020-21,2021-22 , 2022-23, 2023-24 & 2024-25 (Updated to 2025-26 Price level)

Others -- certificate issued from the competent authority not below the rank of Executive Engineer

Capabilities of Vendor

ITT Clause 3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under : Assessed available tender capacity:(AxNx5 -B ) should be greater than or equal to Rs.84.40 lakhs where A-Maximum value of works executed in any one year during the last five years taking into account the completed as well as works in progress. (updated to 2025-26 price level) N-Number of years prescribed for completion of the works for which tenders are invited-9 Months. B-Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 9 Months. (Period of completion of the works for which tenders are invited)

Others -- Submit information as per Section 3 of Tender Document

Financial Status

ITT Clause 3.2 To qualify for award of this contract, each Tenderer in his name should have in the last five years period i.e., 2020-21,2021-22 , 2022-23, 2023-24 & 2024-25 (a) Achieved in atleast one financial year a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.84.40 Lakhs (Updated to 2025-26 Price Level) (Usually not less than the estimated annual payments under this contract)

Others -- Balance Sheets, Profit & Loss Statements certified from an Registered Chartered Accountant with UDIN

ITT Clause 3.3 Each Tenderer should further demonstrate (b) Liquid assets and /or availability of credit facilities of not less than Rs.25.32 Lakhs (credit lines / letter of credit/ certificates from Nationalized banks) for meeting the fund requirement etc (usually 30percent of the amount of contract) (The fomat should be as per KW-3 Bid document Section-3 Para 1.10)

Others -- Certificate from Schedule Bank in the prescribed form as per KW-3

Others

KPWD Class-III and above Registration Certificate

Others -- Others -- KPWD Registration Certificate

Contractors has to upload the EPF Registration

Others -- Others -- Valid EPF Certificate

The contractor belonging to Category-IIA should upload Caste Certificate issued by the Competent Authority of Government of Karnataka

Others -- Others -- Valid Caste Certificate

The contractor belonging to Category-II A shall be domicile of the State of Karnataka for more than 10 years(Should upload Certificate issued by Competent Authority of Government of Karnataka).

Others -- Others -- Valid Caste Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹2,110

EMD Fee Amount

₹84,400

Important Dates

Last Activity

1 Apr 2026

Published

16 Mar 2026

Bid Opening

2 Apr 2026

Download Ends

30 Mar 2026

BOQ Preview

•

Proposed Construction of Madivala Samudaya Bhavana at Beluru Town in Belur Taluk.

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, tr...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each depos...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Size Stone masonry with hard stone in foundation & plinth with

•

Cement mortar 1:6 (1 cement : 6 coarse sand) ---- With all lead and lift including cost and conveyance of all materials,labour,...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 con...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement conc...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic E...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior pai...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a pri...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Bridge Maintenance & Testing - Providing and fixing 25mm diameter steel anchor dowel in hard rock including drilling hole of 32 mm diameter up to 0.75 mtrs depth, placing the dowel in position and eff...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...

•

Mechanical Means -

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including co...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Water supply & Sanitary works

•

Providing and fixing C.P. brass bib cock of approved quality conforming

•

to IS:8931 ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries an...

•

Providing and fixing C.P. brass angle valve for basin mixer and geyser

•

points of approved quality conforming to IS:8931 ---- With all lead and lift including cost and conveyance of all mate...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 25 mm nominal bore ---- With all lead and lift including cost and conveyance of all materi...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 32 mm nominal bore ---- With all lead and lift including cost and conveyance of all materi...

•

Providing and fixing brass full way valve gate with C.I. wheel of

•

approved quality (screwed end) : 50 mm nominal bore ---- With all lead and lift including cost and conveyance of all materi...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pip...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixi...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for ...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cuttin...

•

Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Drilling of Borewell

•

Geophysical investigation at site for sinking borewells for Providing drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

•

Sinking of Borewell of 165mm dia clear using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF & above in all strata including over burdern upto 20 m. Fixing of casing pipes, collars and ...

•

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

•

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per necessary am...

•

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 50 mm ---- With all lead and lift including cost and convey...

•

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. - Size 80 mm ---- With all lead and lift including cos...

•

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

•

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one end fitted with Heavy Duty collar...

•

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...

•

Labour charges for erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including cement concrete for foundation/bed etc,complete as p...

•

Electrical Works

•

Concealed Conduit System : Supplying heavy gauge PVC conduit pipe ……mm dia . mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running bef...

•

Supplying heavy gauge PVC Conduit Pipe ….dia mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement ...

•

Supplying and fixing PVC/metal conduit Deep junction box 25 mm deep junction box ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and ...

•

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wi...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/ C.C wall ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. a) 6Amps one way Switch ---- With all lead and lift including cost and conve...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.b) 6Amps 3 way socket ---- With all lead and lift including cost and conveyan...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. c) Stepped Fan Regulator Two Module ---- With all lead and lift including co...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. d) 32ADPSwitch ---- With all lead and lift including cost and conveyance of ...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. e) 6/16AUniversalSocket ---- With all lead and lift including cost and conve...

•

Supplying and fixing/replacing of 6/16/32Amps electrical accessories on existing switch board. a )6 Amps Pendent holder ---- With all lead and lift including cost and conveyance of all materials,labou...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps. ---- With all lead and lift including cost and conveyance of all mat...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall / Wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/...

•

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase4 wire whole current class-1 Accuracy Energy

•

Meter. ---- With all lead and lift including cost and conveyance of al...

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Supplying exhaust fan of 1440 RPM of 300 mm(12') size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply ---- With all lead and lift including cost and conveyance ...

•

Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V50Hz, ACSupply complete. 15" Sweep(450 mm) ---- With all lead and lift including cost and conveyance of all ...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ba...

•

Supplying of .feet PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70percent lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Power...

•

Supplying of recess mounting non integrated type LED down light. W luminaire comprising of pressure decast extruded aluminium housing, with spring loaded false ceiling clA, LED of Power COB with CCT 6...

•

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wire...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

•

Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. Ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire. ---- With all lead and ...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using40mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit should ...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm,...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm ---- With all lead and lift including co...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Supplyin and Fixing Metal Fan Box with Round Hook. ---- With all lead and lift including cost and conveyance of all materials,labour, hire charges of all machineries and equipments and all other incid...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-3 33477.docx

Tender Document • 0.95 MB

TN 46.pdf

Others - Tender Notification • 0.85 MB

Lot-1814.pdf

Others - Reservation LOT • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

CP RAVISHANKAR CONSTRUCTIONS LLP

₹88.6 Laccepted-aoc