PROVN OF 10 X TOILETS NEAR BLDG NO T-22 AND T-25 OTM ACCN AT CARNATIC LINES AT DAMANA UNDER GE JAMMU

Amount

B/R Portion: - Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc and getting out in any type of soil complete all as specified and as directed.

M&L cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and in mass concrete complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and as directed.

M&L for form work to sides of concrete foundation, footing, bases of columns, plinth beam, side and soffits of plinth beam and similar works in vertical or to batter of rough finished surfaces complete all as specified and as directed.

Form work to soffits of suspended slab such as roof slab, floor slabs landing and similar work not exceeding 200 mm thick complete all as specified and as directed.

Use and waste form work Square, rectangular or polygonal to sides of columns, pillars etc. of rough finished surfaces complete all as specified and as directed.

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of rough finished surfaces complete all as specified and as directed.

M&L RCC M-25 (Design mix) foundations, including footings, foundation beams, plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L RCC M-25 (Design mix) as in columns, pillars, posts and struts complete all as specified and as directed.

M&L RCC M-25 (Design mix) Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M&L RCC M-25 (Design mix) slabs supported on walls, beams and collumns, floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and as directed.

M&L for steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape and tying with annealed MS wire 0.9mm dia all as specified and directed.

M&L for steel reinforcement TMT bars 6 to 8 mm dia, cut to length, bent to shape and tying with annealed MS wire 0.9mm dia all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed. Note: - Water proofing compound to be measured and paid for separately.

Supply only integral water proofing compound complete all as specified and as directed.

Rendering 10 mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5mm thick on brick work or concrete surface in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soft / loose soil complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

M&L spreading, levelling in layers not exceeding 25cm thick and well ramming complete all as specified and as directed.

M&L cement concrete type D-2 (1:4:8), 100mm thick (using 40mm graded crushed stone aggregate) in sub base complete all as specified and as directed.

M&L broken brick hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed.

S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement supply and fixing in the frame at site complete all as specified and as directed.

M&L Steel window factory made with side hung shutters and tubular moulded frame of 16 gauge suitable for single shutter including projecting type hinges non friction with 3mm thick 100mm long handle and two no's tower bolts 100mm long welded on 3.0mm thick MS plate to each window shutter and including hold fast and one coat of zinc chrome primer complete all as specified and as directed.

S&F figured glass, frosted head type and glazing with oil putty in square n exc 0.5 sq. m in each pane 3mm thick complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

Supply only mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

S&F Aluminium handle, cast type, anodised 150 mm long complete all as specified and as directed.

M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of weather proof paint complete all as specified and as directed.

M&L for preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and as directed.

M&L Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L 10 mm thick plaster in one layer in CM (1:3) over concrete roof padding, cement mortar mixed with and including chemical compound PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD mixed in proportion 200 millilitre per 50 Kg cement or STP No. 1 (Liquid) of STP Ltd. in proportion 200 ml per 50 Kg cement as per manufacturers instructions laid when concrete is still green and finishing the surface fair and even without using extra cement complete all as specified and as directed. Note:- Liquid WPC shall be measured and paid separately.

Supply only liquid water proofing compound complete all as specified and as directed. Make:- SUPER LATEX or DR. FIXIT of PIDILITE INDUSTRIES LTD and PIDIPROOF LW of DR FIXIT of PIDILITE INDUSTRIES LTD or equivalent make as approved by GE.

S&F in repair water closet (Squat pattern) with lime concrete bedding, vitreous china orissa pattern 580x440mm, white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedestal pattern) white including seat cover closed pattern with flat bottom complete all as specified and as directed.

S&F PVC (SWR) 'P' trap 110/110 mm bore complete all as specified and as directed.

S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) reducer of 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) WC connector with lip ring 110 mm complete all as specified and as directed.

Supply 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe complete all as specified and as directed.

S&F vitreous china wash hand basin white flat back of size 550x400 mm with pedestal including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified and as directed.

S&F stainless steel soap dish bar fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and as directed.

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltr complete all as specified and as directed.

S&F steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

S&F steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

S&F stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore complete all as specified and as directed.

S&F stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore complete all as specified and as directed.

S&F Bib taps fancy type, cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm complete all as specified and as directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and as directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and as directed.

S&F 110 mm PVC (SWR), waste and vent pipes in any length with or without ears, with rubber ring joints laid in trenches or in floor complete all as specified and as directed.

S&F 75 mm PVC (SWR), waste and vent pipes in any length with or without ears, with rubber ring joints laid in trenches or in floor complete all as specified and as directed.

S&F 110 mm dia PVC bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F 75 mm dia PVC Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed.

S&F grating doom 100mm dia of PTMT (minimum weight 25 gms) complete all as specified and as directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and as directed.

Surface excavation not exceeding 45cm deep and averaging 30cm deep and getting out in soft / loose soil complete all as specified and as directed.

M&L for 40mm thick average sand filling as screed bed for laying interlocking paving block including watering and consolidation complete all as specified and as directed.

M&L for machine pressed pre cast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.

S&F precast PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) kerb stone of size 150mm X 125mm and 300mm height, chamfered at one end (75mm X 75mm) fixed vertically and set in CM 1:4 complete all as specified and as directed.

M&L for Construction of septic tank for 500 users, exc in ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole covers having 6mm plate embedded all round/ fibre reinforced cover with angle iron frame Vent Shaft and sludge chamber etc complete all as specified and shown in Drg No CEPZ-C-TD-13/01-05 complete all as specified and as directed.

M&L for Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab of thickness 100 mm in M-25/ RR masonry / Filling with brick bats, complete of size 3.6 M dia X 4.5M deep as shown in Drg No CEPZ-C-TD-13/01-05 complete all as specified and as directed.

Removing excavated soil up to a distance 1.5 KM and depositiing where directed complete all as specified and as directed.

M&L for concrete bed to drain pipes of bore 200mm dia including packing under haunching against the sides of pipe after they are laid tested in cement concrete 1:4:8 type C-2 (using 40mm graded crushed stone aggregates) complete all as specified and as directed.

M&L for 150mm internal dia NP-3 RCC pipe laid in trenches on concrete bedding jointed in cement mortar 1:1 complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in benching, coping etc including necessary form work all as specified and directed.

M&L for Pre-cast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary form work and set in CM 1:6 complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in surface channels and drains etc complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

E/M Portion: - M&L for point wiring for one light / fan point / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid / steel conduit and into existing CI / pressed steel terminal boxes including 3.00 thick hylum brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC proof / ceiling PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.

S&F angle / batten lamp holder on PVC square Blocks with PVC insulated body complete all as specified and as directed.

S&F LED Bulb 9 watt 240 Volts complete all as specified and as directed.

S&F for switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and as directed.

M&L for distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud SPN 2 way 240 Volts double door complete all as specified and as directed by Engr-in-Charge. Note: - Distribution Board and MCB's should be of same make.

S&F ceiling rose, 3 Phase / PVC / polycarbonate isolated body complete all as specified and as directed.

S&F new generation energy saving, wall mounted LED tube lightbatten fittings, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver 20 watt LED 6500k (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

S&F MCB single pole and neutral 5 to 32 Amp suitable for 240 Volt, 'B' series complete all as specified and as directed.

S&F 20mm GI pipe light grade galvanised with all fittings such as elbow, union, socket etc as per site requirement and laid in trenches complete all as specified and as directed.

S&F Gun metal, globe or gate valve 20mm ISI mark with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Labour for cutting of existing pipe line of any size for making suitable connection for 20mm dia pipe including all type of fittings complete all as specified and as directed. Note: - Earth work and welding of pipe line are included in above said rate.

S&F LED street light fittings, 45 watt, powder coated pressure dia cast aluminium compact high power LED street light with heat resistant toughened glass with lens complete with suitable bracket, clamps and suitable length twin core wire including taking out old unsv from pole complete all as specified and as directed. Make: - KCSAD / Bajaj / C&S / Wipro / Havells. Note: - Rate is inclusive of bracket of suitable size made of GI medium grade pipe 1.2 mtr long bend to shape 120° and fixing with 2 No's of suitable sizes clamps including nuts, washers, bolts, complete fittings.

Supply and laying or fixing or passing through pipe 1100 Volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sqmm nominal cross section 2 core in service connection complete all as specified and as directed.

M/S A K CONSTRUCTION

M/S LANGER CONSTRUCTIONS

Shri Karshni Builders

Jagbir Singh and Co

M/s Koul & Sons

M/S VERMA ENTERPRISES

M/S STAR CONSTRUCTIONS

Bidder Name

M/s Sunny Builders

Shri Karshni Builders

M/S VERMA ENTERPRISES

Jagbir Singh and Co

M/s Koul & Sons

M/S STAR CONSTRUCTIONS

M/S A K CONSTRUCTION

M/S LANGER CONSTRUCTIONS