REPAIR/REPLACEMENT TO JOINERY,PLUMBING AND SANITARY FITTINGS IN CHUSUL MD ACCN AT AEC TRG COLLEGE AND CENTRE PACHMARHI.

Amount

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6), type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even & smooth without using extra cement, with and including joint filling (Size 30mm deep x 10mm wide) with sealing compound grade- A complete all as specified and directed.

M&L for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in foundations, filling and mass-concrete complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with modular size full brick subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2, (40 mm graded stone agg) as in sub base of floor complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement, laid in pannel with and including 4 mm thick, 38mm wide glass dividing strips complete all as specified and directed.

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.

M&L for 15mm thick plastering on other than fair faces of brick wall in CM (1:6) surface finished even and fair complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall in CM (1:6) surface finished even and fair complete all as specified and directed.

M&L for 15mm thick plastering on fair faces of brick wall in CM (1:4) surface finished even and fair complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of colour wash complete all as specified and as directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot and applying two coats of colour wash complete all as specified and as directed.

M&L for preparing old decorated plastered surfaces of wall by complete removal and applying two coats of cement base paint complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of wall and applying one coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall, pillasters, cornices etc such as washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of oil emulsion distemper complete all as specified and as directed.

S&F in repair 5mm thick beveled edge best quality looking mirror of size 600x450 mm with 30 mm PVC beading all around the glass, mounted over 3mm thick PVC sheet or 4mm thick AC bldg board, complete all as specified and directed.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) of following size complete all as specified and directed:-

Area not exc 1.5 sqm each

Area exc 1.5 sqm but not exc 4 sqm each

Taking down shutters of any description, of following size complete all as specified and directed:-

Area not exc 1.0 sqm each

Area exc 1.0 sqm but not exc 2.0 sqm each

S&F second class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick factory made plain framed, panelled door shutters (two panel) of IInd class hard wood rail and styles with lock rail and panel of 9 mm BWP commercial ply. The size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified.

S&F 35mm thick factory made second class hard wood glazed and skeltron door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

S&F 30mm thick factory made second class hard wood glazed and skeltron window shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (b).

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete as all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

M&L for preparation of old painted surface of wood and wooden based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surface of steel material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer including preparation of new wood or wooden base surface over 10cm width or grith complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, treating small articles such as stop, covers, gully, grattings, holdfasts, ends of posts, backs of ckowkhats etc, area not exc 0.10 sqm and treated with creosote complete all as specified and directed.

S&F bearing bars, tongues or water bars for window frames, window guard bars, plain, let in and fixed independently in wooden frame, L or T section supports for for shelves etc and similar article conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty /wooden beads in square n. exc 0.5 sqm in each pane complete all as specified and as directed.

S&F anodised aluminium handles cast type of following size complete all as directed and specified:-

150 mm long

100 mm long

S&F anodised aluminium barrel tower bolts of extruded section of following size complete all as directed and specified:-

200 mm long

150 mm long

S&F anodised aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of 250mm long size complete all as specified and directed:-

S&F butt hinge, medium weight, cold rolled and fixed of following size complete all as specified and directed:-

100 mm long

75 mm long

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles not exc 200 cucm each complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or wire staples complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or wire staples complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm complete all as specified and directed :-

M&L for coloured, glazed ceramic tiles size 450x350x 7-8mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over 10mm thick rendering in CM (1:3) all as specified and directed.

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed.

S&F in repair vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 550mm x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc.

Supply only 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

Disconnecting and dismantling of water storage tank and removing from the site of Capacity exc 250 Ltr but not exc 500 Ltr of tank complete all as specified and as directed:-

S&F rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings, of Capacity 500 Ltrs of tank complete all as specified and as directed:-

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes or brass ferrule and fixed of 20mm bore ( minimum weight 210gms) size complete all as specified and as directed :-

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approvrd by GE complete all as specified & directed. MAKE: Parryware, Model E8090 SLIMLINE or equivalent model of make as specified in appendix.

S&F in repair 15 mm bore stop valve chromium plated, fancy type, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 15 mm bore stop valve PTMT (min wt 90 gm), any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair 15 mm bore bib taps, cast copper alloy, chromium plated with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair 15 mm bore bib tap of standard PTMT (min wt 90 gm), any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair PVC connection 15 mm size with PTMT nut of 450mm length complete all as specified and directed :-

M&L for chequered cement concrete tiles, set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm thick screed bed in cement mortar (1:4) for 25cm x 25cm x 25mm thick size of tile complete all as specified and as directed:-

Taking up or down steel water tubing and connections of following bore complete all as specified and as directed :-

15mm bore

20mm bore

S&F galvanised steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling of following bore complete all as specified and as directed :-

15mm bore

20mm bore

SUBIR KUMAR ROY

GHASI RAM SAHU

DEEPAK JAISWAL