Erode District Kasipalayam Gobi Town Panchayat MP Fund

Amount

Earth work excavating and depositing on bank with initial lead of 10 metre and initial lift of 2 metre in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders as per standard specification

Plain Cement concrete 1:4:8 mix using 40mm HBG metal for foundation and flooring including cost of all materials to site and all labour charges for mixing, laying and curing etc., complete as per standard specification

R.R. Masonry in Cm 1:5 mix using rough stone Bond stone including cost & conveyance and all labour charges etc., complete

Brick work in cement mortar 1:5 mix using basement quality of country bricks (23m x 11cm x 7cm) for foundation including cost and conveyance of all materials to site including curing as perstandardspecification

Plastering with cement mortar 1:5 mix to 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification

Plastering with cement mortal 1:5 mix using 20 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Supply and Delivery of 3.00 HP Three Phase Submersible mortar including cost and conveyace of all labour charges etc., complete 3.00 HP Submersible Motor with Panel Board 150 LPM, 40 m Head)35184+15601)

2) 32 mm UPVC pipes

3) 2.5 Sq.mm. Core cable

Supply of 1000 Lit. capacity Plastic tank

Labour charges for the erection of Submercible pumpset in Borewell or open well inculding Fixing and jointing submersible cable withproper clamps upto the starter to reqired depth and al so fixing of riser pipes to the required depth valves, erection clamps, pressure gagues upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps, capacitor single phasing preventor, waqter level guard and laying and jonting the cables and twin earthing as per IE rules etc., complete and testing the pump set and trail run for 10 days. (up to 5 HP Motor)

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

M.KARUPPUSAMY