Building at Roing

Bid Proposal Sheet-Price Part(BPS-Vol-IC)

:: COVER PAGE ::

Name of Package Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

NIT Ref.No.: NER/RPC/OT/1500-1529

Document Code.: NESR/RPC/1500-1529/BPS (VOL-IC)

Address of Purchaser/ Owner Sr. General Manager (C&M)

Power Grid Corporation of India Limited.

Dongtieh, Lower Nongrah, Lapalang.

Shillong - 793006.

Phone /Fax -0364- 2536406

E-mail: [email protected]

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not reformat any of the cell of the work book.

II This Workbook consists of following worksheets :

Opening page of the workbook.

Names of Bidder :

● Select Sole Bidder or Association from the pull down menu. Do not leave this cell blank.

● Select nos. of the Association other than the Lead Partner from drop down menu.

● Fill up names and address of the Sole Bidder and /or Association.

● Fill up date in dd-mmm-yyyy format from drop down menu.

● You are required to fill only the percentage of your quoted bid price above or below the estimated cost of the subject tender in the specified cell of Schedule-1 which includes only DSR Items and rate for the Non Scheduled Items.

● Total amount shall get calculated automatically.

● The total amount shall be exclusive of all taxes and duties.

Happy Bidding !

Bidders Information

Package Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station Sole Bidder 1

Document Code: NESR/RPC/1500-1529/BPS (VOL-IC) Association 2 or More

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Sole Bidder

Name of Sole Bidder

Address of Sole Bidder

Name of other Partner …….. …….. …….. …….. …….. ……..

Address of other Partner …….. …….. …….. …….. …….. ……..

Name of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..

Address of other Partner - 2 (more, if any) …….. …….. …….. …….. …….. ……..

पावर ग्रिड कार्पोरेशन ऑफ़ इंडिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

उत्तर पूर्वी क्षेत्र,/North Eastern Region,

ड़ोंगतिह, लोअर नोंग्रह/Dongtieh, Lower Nongrah,

लापालांग, शिलांग,मेघालय/Lapalang, Shillong ,Meghalaya

BID PROPOSAL SHEETS FOR PRICE PART (BPS: VOL-IC)

NIT Ref. No. NER/RPC/OT/1500-1529

Package Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

BID FORM FOR PRICE BID

Bidder's Name and Address:

Bid Proposal Reference: Dated:

Person to be contacted:

Telephone No.: Fax:

Contract Services,

Power Grid Corporation of India Limited

Dongtieh, Lower Nongrah

Lapalang, Shillong-793 006 (Meghalaya)

Subject: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Document No. NESR/RPC/1500-1529/BPS (VOL-IC)

Dear Ladies and/or Gentlemen,

0.0 In continuation of Techno-commercial Bid,we hereby submit the Second Envelope of the Bid,both of which shall be read together and in conjunction with each other,and shall be construed as an integral part of our Bid. Accordingly,we the undersigned,submit our offer for Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station under the above-named package in full conformity with the said Bidding Documents for the sum of (Specify the currency and the amount in figures and words) …………. or such other sums as may be determined in accordance with the terms and conditions of the Bidding Documents.

Schedule-I: Bill of Quantities

Annexure-I to Schedule I Summary Price Proposal.

2.3 We declare that as specified in Clause 8.0 of SCC of the bIdding Documents, the contract price shall be FIRM and shall not be subjected to any price variation or price adjustment under any circumstances, whatsoever, during the execution and completion of the works.

2.5 We declare that items left blank in the schedules will be deemed to have been included in other items. The Total for each Schedule and the TOTAL of Grand Summary shall be deemed to be the total price for executing the facilities and sections thereof in complete accordance with the contract, whether or not each individual item has been priced.

0.0 We confirm that except as otherwise specifically provided our Bid Prices in this Second envelope is exclusive of GST but include other taxes, duties, levies and chrges as may be assessed on us/our Associate(applicable for Foreign Bidder), our sub-contractor/Sub-Vendor or their employees by all Municipal, state or National Govermanet authorities in connection with the Facilities, in and outside of India.

3.1 100% of applicable Taxes and Duties i.e GST which are apayable by the employer under the contract, shall be reimburhsed by the employer on production of satisfactory documentary evidence by the contractot in accordance with the provisions of the Bidding Documents.

0.0 We further understand that notwithstanding 3.0 above, inacse of award on us, you shall also bear and pay/reimburse to us, GST applicable on work contract by us to you, imposed on the work contract specified in Schedule No.1 of the Price Scheduel in this seccond envelope , by the India Laws.

0.9 We confirm that we have also, registered/ we shall also gets registered in the GST Network with a GSTIN in all states where the project is located and the states from which we shall make our supply of Goods.

0.0 #(For Joint Ventures) We, the partners of Joint Ventures submitting, this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the contract in accordance with the contract terms and conditions.

0.0 We, hereby, declare that only the persons or firms insterested in this proposal as principles are named here and that no other persons of firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made wihtout any connection with any other person, firm or party likewise submitting a proposal is in all respect for and in good faith, without collusion of fraud.

Thanking you, we remain,

Yours faithfully,

Place: (Signature)

Business Address: (Designation)

Country of Incorporation:

(State or Province to be indicated)

Name of the Principal Officer:

Address of the Principal Officer:

Document Code No.:NESR/RPC/1500-1529/BPS (VOL-IC) Annexure-I to Schedule - 1 of BPS, Vol-IC

Name of Work: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(SUMMARY OF PRICE PROPOSAL)

Bidder’s Name and Address

Name : C&M Deptt.

Address : Power Grid Corporation of India Ltd.,

NERTS, Lower Nongrah, Lapalang

Shillong - 793006

We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents.We have indicated the Percentage and Amount to the Total Estimated Cost for DSR items and unit rate for each items for Non-DSR items covering the entire scope of works enclosed herewith. In case the bidder does not quote/leave blank against any of the line item, then the rate of that BOQ line item shall be considered deemed included in other quoted rate.If there is any discrepancy in the total quoted price indicated in Price_Schedule Excel Sheet and elsewhere in the E-tender portal, then the prices indicated in Price_Schedule Excel Sheet shall prevail for the purpose of bid evaluation and further action.

Sl. No. DSR Item No Description Unit Quantity Rate (Rs.) Quoted Unit Rate (Rs.) Amount (Rs.) SAC (Service Accounting Codes) Whether SAC in column 8 is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column 10 is confirmed. If not indicate applicable rate of GST #

2 2.6.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil. cum 704 197.055 995433

3 2.7.1 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.Ordinary rock cum 50 553.864 995433

4 2.7.3 Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Hard rock (blasting prohibited) cum 50 1590.817 995433

5 2.10.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of urplus excavated soil as directed, within a lead of 50 m :All kinds of soil. Pipes, cables etc, not exceeding 80 mm dia. Metre 100 239.353 995433

6 2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum 430 217.593 995433

7 2.25A Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. cum 50 777.674 995443

8 2.26.2 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. Ordinary rock or Hard rock. cum 243 252.453 995433

9 2.27 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. cum 112 2357.722 995433

10 2.28 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil sqm 1000 37.912 995433

2 Concrete Work

1 2.34.1 Supplying chemical emulsion in sealed containers including delivery as specified. Chloropyriphos/Lindane emulsifiable concentrate of 20%. ltre 50 260.612 995433

2 2.35.1.1 Diluting and injecting chemical emulsion for anti-termite treatment (excluding cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration Metre 70 43.186 995433

3 2.35.3.1 Diluting and injecting chemical emulsion for anti-termite treatment (excluding cost of chemical emulsion) : Treatment of soil under floor using chemical emulsion @one litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2(1cement:2coarse sand): With chloropyriphos/Lindane EC 20% with 1% concentration. Sqm 210 43.186 995433

4 4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 10 8746.47 995454

5 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) cum 32 7562.475 995454

6 4.11 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). sqm 40 550.367 995454

7 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. per 50kg of cement 30 20.15 995454

8 4.13 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. sqm 40 162.251 995454

9 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. sqm 230 831.85 995454

10 5.9.1 Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete sqm 58.41 435.353 995457

11 5.9.3 Centering and shuttering including strutting, propping etc. and removal of form for :Suspended floors, roofs, landings, balconies and access platform sqm 0.999 1029.405 995457

12 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers sqm 531.34 817.529 995457

13 5.9.6 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts sqm 0.399 1067.206 995457

14 5.9.7 Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases sqm 28.13 849.224 995457

15 5.9.19 Centering and shuttering including strutting, propping etc. and removal of form for : Weather shade, Chajjas, corbels etc., including edges. sqm 29.04 1055.882 995457

16 5.22.6 STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 6471 119.732 995454

17 5.22A.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. kg 8334 119.732 995454

18 5.3 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. Mtr 89.2 87.037 995478

19 5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, shelves, chajjas, lintels, bands, plain window sills above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 15 12773.055 995454

20 5.33.1.1 DESIGN MIX CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work, using coarse aggregate and fine aggregates derived from natural sources, Potrland Puzzzolana/ Ordinary Portland/ Portland slag, admixutues in recommneded proportions as per IS: 9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and including pumping of concrete to site of laying, curing, carriage for all leads but excluding cost of centering, shuttering, finishing & reinforcement as per direction of Engineer-in-charge. Concrete of M25 grade. All works upto plinth level cum 82.43 10551.883 995454

21 5.33.2.1 DESIGN MIX CONCRETE Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work, using coarse aggregate and fine aggregates derived from natural sources, Potrland Puzzzolana/ Ordinary Portland/ Portland slag, admixutues in recommneded proportions as per IS: 9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and including pumping of concrete to site of laying, curing, carriage for all leads but excluding cost of centering, shuttering, finishing & reinforcement as per direction of Engineer-in-charge. Concrete of M25 grade. All works above plinth level upto floor V level. cum 0.399 10946.715 995454

22 6.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) cum 16 7918.006 995456

23 6.4.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) cum 66 10373.812 995456

24 6.13.2 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) sqm 226 1247.608 995456

25 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. sqm 226 116.346 995456

1 7.32.1 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone cum 1.4 104068.509 995474

2 8.2.2.2 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm sqm 11.5 5702.164 995474

3 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work Metre 0.000 567.241 995474

4 8.4 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc.complete. 100sqm 11.5 631.187 995474

5 8.9.1.2 (analyzed) Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 18mm thick. Granite of any colour and shade sqm 95 5253.322 995474

6 8.7.2 Providing and fixing cramps of required size & shape in RCC/ CC / Brick masonry backing with cement mortar 1:2 ( 1 cement :2 coarse sand), including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).Stainless steel cramps. kg 20 793.105 995416

7 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. sqm 132 1407.639 995419

4 Doors/windows/cupboard

1 9.7.7.2 Float glass panes. 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). sqm 112.5 2886.94 995476

2 9.12 Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) sqm 10 195.834 995476

3 9.47.1 (Sim) Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets and decorative tops at both ends as per approved design: 25 mm dia (heavy type). Metre 48 194.28 995476

4 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. kg 625.13 264.609 995476

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

7 9.61.1 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm Metre 54 373.517 995476

8 9.88 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. each 24 1108.338 995476

9 9.90.2 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 50 mm each 8 370.741 995476

10 9.92.2 Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm (4 Nos. handles per cupboard) each 32 228.972 995476

11 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm each 32 336.659 995476

12 9.97.2 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm each 40 127.836 995476

13 9.97.4 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete:150x10 mm (Wire mesh door) each 16 91.644 995476

14 9.97.5 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :100x10 mm (cupboard) each 32 71.828 995476

15 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm each 30 73.549 995476

16 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper each 36 80.321 995476

17 9.114.2 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) (12 Nos. magnetic catcher per cupboard) each 96 44.074 995476

18 9.127.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick sqm 41.05 996.155 995476

19 9.135.2 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading sqm 46.44 1363.288 995476

20 9.147.A4.2 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note: - Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 ii) Sites with structure height more than 20m for all wind speeds. Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). sqm 65 12072.205 995411

21 9.147.B3.1 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note: - Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 ii) Sites with structure height more than 20m for all wind speeds. Three track three panels sliding door with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body. Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (74 mm & above).(Height upto 2.5 metre). sqm 36 11189.343 995411

22 9.147.D1.3 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note: - Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 ii) Sites with structure height more than 20m for all wind speeds. Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. Using R3 series with frame (55 mm & above) x (45 mm & above) & sash/mullion (55 mm & above) x (65 mm & above).(Height upto 1.2 metre). sqm 7 13233.054 995411

23 9.147.C2.3 Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note: - Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 ii) Sites with structure height more than 20m for all wind speeds. Fixed window/ventilator with mullion/transom Using R3 series with frame (55 mm & above) x (45 mm & above) & sash/mullion (55 mm & above) x (65 mm & above).(Height upto 2.5 metre). sqm 10 8690.129 995411

24 10.17 Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. each 18 250.898 995476

25 26.86.3 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm Mtr 59.4 1052.108 995421

26 26.86.6 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 65 x 125 mm Mtr 126.7 1533.81 995421

27 26.87.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick sqm 52 4825.574 995476

28 26.87.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 35 mm thick sqm 9 5567.889 995428

29 26.89.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately). 25 mm thick sqm 90 4317.616 995428

30 26.90.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-InCharge. (Note: stainless steel screws shall be paid separately) 12 mm thick sqm 40 1899.611 995428

31 9.168 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineerin-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) sqm 22 3140.947 995432

32 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Kg. 225 857.495 995476

1 11.41A.1.2 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size. Size of Tile 800 x 800 mm. Sqm 58 1703.944 995421

2 11.41A.2.3 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified floor tiles polished finish of size. Size of Tile 800 x 800 mm. sqm 98 1919.261 995421

3 11.41A.3.3 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 800 x 800 mm. sqm 66 1914.376 995421

4 11.41A.3.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 600 x 600 mm. sqm 35 1626.232 995474

5 11.56.1 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent sqm 99.5 4975.003 995474

6 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm sqm 48 1801.861 995474

7 11.46.3 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 800x800 mm sqm 70 2174.211 995474

6 Waterproofing

1 12.21.1 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase Metre 8 338.768 995453

2 12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. each 2 331.108 995453

3 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). sqm 61.4 854.386 995453

4 22.14.1 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Cum 14 8928.316 995453

5 13.18 (Sim) Neat cement punning over grading concrete including making checkered pattern in the grid of 300mm x 300mm square and 3mm deep. Sqm 272 173.242 995472

6 22.23.2 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm. sqm 272 402.769 995453

7 12.41.2 Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes. 110 mm diameter metre 48 418.978 995416

8 12.42.1.2 Providing and fixing on wall face Unplasticised - PVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Coupler. 110 mm. each 6 151.15 995453

10 12.42.4.2 12.42.4 Single tee without door 12.42.4.2 110x110x110 mm each 6 245.736 995453

13 12.43.2 Providing and fixing Unplasticised -PVC pipe clips of approved design to Unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 20 412.206 995453

14 12.44 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. each 6 60.726 995453

1 12.52.2 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. sqm 11.5 2296.663 995453

2 12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks Sqm 46 1505.168 995453

1 13.1.1 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) sqm 515 385.284 995472

2 13.2.1 15 mm cement plaster on rough side of single or half brick wall of mix:1:4 (1 cement: 4 coarse sand) sqm 515 443.457 995472

3 13.16.1 6 mm cement plaster-1:3 (1 cement : 3 fine sand) sqm 270 333.55 995472

4 13.18 Neat cement punning. sqm 100 88.758 995472

5 13.8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 1441 173.242 995472

6 13.47.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) sqm 742 189.95 995473

7 13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work sqm 70 173.075 995473

8 13.65.1 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or more coats on new work sqm 20 155.701 995473

9 13.85.3 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 1184 82.097 995473

10 13.83.2 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats sqm 1184 158.532 995473

1 16.89 Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. sqm 10 1616.018 995421

2 11.2 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12mm mud mortar, including filling joints with sand, with common burnt clay non modular bricks. Sqm 10 879.31 995474

3 16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). Cum 0.5 11232.251 995421

10 Sanitary & Water Supply

1 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm each 3 7710.793 995478

2 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. each 6 1148.803 995478

3 17.25.5 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :Flat back wash basin of size 450x300 mm each 6 696.076 995478

4 17.28.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi regid pipe. 32mm dia each 3 115.347 995478

5 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 8 1785.097 995478

6 17.35.1.3 Providing and fixing soil, waste and vent pipes : 100 mm dia. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 mtr 35 1298.121 995478

7 17.35.2.3 Providing and fixing soil, waste and vent pipes : 75 mm diameter : Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 Mtr 35 1070.481 995478

8 17.38.1.3 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm dia. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 each 10 629.688 995478

9 17.38.2.3 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.75 mm dia. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15906 each 10 465.106 995478

10 17.39.1.3 Providing and fixing plain bend of required degree. 100mm dia. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 each 5 408.542 995478

11 17.39.2.3 Providing and fixing plain bend of required degree. 75mm dia. Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15906 each 5 280.318 995478

12 17.42.1.3 Providing and fixing double equal plain junction of required degree. 100x100x100x100 mm Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15905 each 5 844.506 995478

13 17.42.2.3 Providing and fixing double equal plain junction of required degree. 75x75x75x75 mm Hubless centrifugally cast (spun) iron pipes epoxy coated inside & outside IS:15906 each 5 465.106 995478

14 17.44.1.3 Providing and fixing single equal plain junction of required degree :100x100x100 mm. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 each 5 645.508 995478

15 17.44.2.3 Providing and fixing single equal plain junction of required degree :75x75x75 mm. Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15906 each 5 375.071 995478

16 17.56.1.3 Providing and fixing terminal guard :100 mm Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 each 4 474.931 995478

17 17.57A.1.1 Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe.100 mm dia. SS 304 grade coupling with EPDM rubber gasket each 20 479.649 995478

18 17.60.1.3 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Hubless centrifugally cast (spun) iron epoxy coated inside & outside as per IS:15905 each 4 948.695 995478

19 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore each 6 690.969 995424

20 18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore each 6 917.111 995424

21 18.17.6 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore each 2 2891.492 995424

22 18.18.2 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :20 mm nominal bore each 6 513.453 995424

23 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25 mm nominal bore each 6 515.174 995424

24 18.84.1 Providing and fixing chrome plated brass battery based infrared sensor operated pillar cock , having foam flow technology-15mm nominal bore each 2 9773.599 995424

25 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 4000 12.212 995424

26 18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 18.51.1 15 mm nominal bore each 5 886.97 995424

27 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 18.53.1 15mm nominal bore each 32 637.57 995424

28 18.7.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall. 25 mm nominal dia Pipes metre 40 445.789 995424

29 18.7.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 40 mm nominal dia Pipes metre 20 780.394 995424

30 18.8.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes. Mtr 90 596.827 995424

31 18.9.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 80 mm nominal dia Pipes Mtr 20 2405.016 995424

32 18.53A Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. each 6 83.041 995424

33 18.58.2.1 Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid-150 mm nominal size square 100 mm diameter of the inner hinged round grating. each 20 218.648 995424

34 19.1.2 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter Metre 5 772.456 995424

35 19.1.5 Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 300 mm diameter metre 35 2291.556 995424

36 19.3.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe metre 5 824.967 995424

37 19.3.5 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design : 300 mm diameter S.W. pipe metre 35 1302.617 995424

38 19.4.1.1 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 4 3005.95 995424

39 19.6.4 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia. R.C.C. pipe mtr 10 1103.842 995424

40 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With F.P.S. bricks with class designation 75 each 4 14177.475 995424

41 19.8.1.1 Extra for depth for manholes : 19.8.1 Size 90x80 cm 19.8.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Mtr 5 9797.69 995424

42 19.18.2 Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg each 4 3820.315 995424

43 19.32.1 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 1 29821.262 995424

44 17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. each 9 20219.406 995478

1 SUB HEAD -I: WIRING

1 1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. ( Group C) Point 135 1715.87 995461

2 1.11 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Point 10 1826.98 995461

3 1.55.3 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group-C (looping point ) Point 64 1003.55 995461

4 1.14 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

5 1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire For 6A Light Circuit Point Metre 120 272.53 995461

6 1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire For 6A UPS & Light Circuit Point Metre 100 321.65 995461

7 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire For 16A Power Circuit Point Metre 90 390.66 995461

8 1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire For AC Circuit Point Metre 80 513.47 995461

9 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire For TPN LDB Submain wire Metre 60 1175.49 995461

10 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire For TPN LPDB Submain wire Metre 50 1596.56 995461

4 1.57 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. Each 15 850.33 995461

2 SUB HEAD -II: TELEPHONE AND TV

1.18 Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

2 1.19 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. Meter 240 54.97 995424

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

4 1.24.6 Telephone socket outlet Each 16 173.11 995461

5 1.24.7 TV antenna socket outlet Each 16 173.11 995461

3 SUB HEAD -III: SUB MAIN

1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1 1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Meter 600 431.6 995461

2 1.7.5 2 X 10 sq. mm + 1 X 6 sq. mm earth wire Meter 90 830.45 995461

SUB HEAD -IV: FIXTURES

3 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Each 25 685.41 995461

4 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Each 36 557.92 995461

5 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). Each 12 790.68 995461

1.27 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

8 1.27.4 6 Module (200mmX75mm) Each 4 470.2 995461

10 1.27.1 1 or 2 Module (75mmX75mm) Each 4 348.55 995461

1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

12 1.24.4 3 pin 5/6 A socket outlet Each 25 142.7 995461

13 1.25 Supplying and fixing two module stepped type electronic fanregulator on the existing modular plate switch box includingconnections but excluding modular plate etc. as required. Each 25 431.6 995461

14 1.26 Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate asrequired. Each 20 46.79 995461

15 1.33 Supplying and fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. Each 25 101.76 995461

16 1.58 Supplying and fixing PVC batten/ angle holder including connections etc. as required. Each 65 128.66 995461

4 SUB HEAD -IV: INSTALATION, TESTING & COMMISSIONING

1 1.35 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. Each 35 139.19 995461

2 1.41 Installation, testing and commissioning of pre-wired,fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly onceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. Each 40 240.95 995461

3 1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. Each 25 249.13 995461

4 1.50.1 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required (Upto 450 mm sweep) Each 20 526.34 995461

5 SUB HEAD -V: MCB'S AND MAIN DISTRIBUTION BOARDS

2.3 Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

1 2.3.4 16 way, Double door Each 4 3673.85 998736

2.1 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2 2.10.1 Single pole 6 Amp Each 20 299.43 998736

3 2.10.1 Single pole 16 Amp Each 20 299.43 998736

4 2.13.2 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps Each 16 1209.41 998736

2.14 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0 0

7 NS Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1500 mm wide x 2.10 mm ht x 300 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 2 74389.29 995461

8 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 20 15.21 998736

9 2.21 Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Each 2 314.63 998736

6 SUB HEAD -VI: EARTHING AND LIGHTNING PROTECTION

1 5.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm diaincluding accessories, and providing masonry enclosure withcover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Each 5 8017.9 998739

2 5.12 Providing and laying earth connection from earth electrodewith 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earthelectrode including connection with G.I. thimble excavation and re-filling as required. Meter 30 335.69 998739

3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. Meter 15 285.39 998739

4 6.2 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. Each 1 605.88 998739

5 6.4 Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. Each 20 132.17 998739

6 6.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) Meter 20 147.38 998739

7 6.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) Meter 20 230.42 998739

8 14.13.1 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 50 mm dia Meter 15 765.18 995462

6 SUB HEAD -VII: POWER CABLES

7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Quoted Percentage (in Figure) 0

Total Read Out Price (Rs.): Part-A

NOTE:The above cost is exclusive of GST. GST will be paid extra as applicable corresponding to the HSN/SAC code.

Document Code No.:NESR/RPC/1500-1529/BPS (VOL-IC) Annexure-I to Schedule - 1 of BPS, Vol-IC

Name of Work: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

NON-SCHEDULED Items

Bidder’s Name and Address (Sole Bidder) :

Name : C&M Deptt.

Address : Power Grid Corporation of India Ltd.,

NERTS, Lower Nongrah, Lapalang

Shillong - 793006

We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents.We have indicated the Percentage and Amount to the Total Estimated Cost for DSR items and unit rate for each items for Non-DSR items covering the entire scope of works enclosed herewith. In case the bidder does not quote/leave blank against any of the line item, then the rate of that BOQ line item shall be considered deemed included in other quoted rate.If there is any discrepancy in the total quoted price indicated in Price_Schedule Excel Sheet and elsewhere in the E-tender portal, then the prices indicated in Price_Schedule Excel Sheet shall prevail for the purpose of bid evaluation and further action.

S N Item Ref. No. Description Unit Quantity Rate (in figures) Amount in Rs. (In Figure) SAC (Service Accounting Codes) Whether SAC in column ‘….’ is confirmed. If not indicate applicable the SAC # Rate of GST applicable ( in %) Whether rate of GST in column ‘---’ is confirmed. If not indicate applicable rate of GST #

1 SOR-March-2025 Soil Investigation: 2 boreholes of 15 metre length each as per technical specification including all laboratory and field tests, report and recommendations. LS 1 995435

2 NS Structural design and preparation of detailed structural drawings by a certified structural design Engineer for residential building B3 (G+1) along with submission of Cad Drawing and STAAD File. Sqm 420 998393

3 NS1 Construction of drains 300mm wide with 300mm depth by providing base PCC 1:4:8 and full brick wall of mortar 1:6 and plastering with a coat of neat cement of mortar 1:4 (1 cement:4 fine sand) all complete including back filling. Mtr 70 995462

4 NS2 Providing brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 40mm (in cupboards) each 30 995476

5 NS3 Supply and fixing of SS Handles 100mm Nos 20 995478

6 NS4 Supply and fixing of SS Handles 125mm Nos 20 995478

7 NS5 Supply and application of Silicon Sealent around UPVC windows and doors of quarters. Mtr 100 995419

8 NS6 Providing P.O.P decorative moulding, cornices etc. i/c required scaffolding, hacking to plaster surface wherever required. complete as per Architect drawing & direction of Engineer-in-Charge Corner decorative moulding of size 50x75mm Mtr 250 995472

9 NS7 Providing and fixing GI plaster mesh (Arpita or equivalent) made out of galvanized iron of nominal thickness 0.35mm with a zinc coating of 120 gms per sqm along the junctions of masonry and concrete works including fixing, scaffolding, lead and lifts etc. as per the directions of the Engineer in Charge. sqm 250 995414

10 NS8 Providing and fixing Single Lever Wall Mixer with Provision For Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges(Jaquar make OPP-CHR-15117PM or equivalent) as per approval of Engineer-in-charge each 6 995424

11 NS9 Providing and fixing Pillar cock on wash basin (Jaquar make OPP-CHR-15001PM or equivalent) as per approval of Engineer-in-charge each 5 995424

12 NS10 Providing and fixing Bib Cock with Wall Flange Jaquar make Opal Prime OPP-CHR-15037PM or equivalent as per approval of Engineer-in-charge. each 10 995424

13 NS11 Providing and fixing white vitreous china wash basin Wall Hung Basin With Fixing Accessories, Jaquar make, Size: 560x415x200 mm CNS-WHT-301 with Full Pedestal CNS-WHT-801 or equivalent including making all connections but excluding the cost of fittings. each 5 995416

14 NS12 Providing and fixing Single Towel Rail 600mm Long Jaquar make CPA-CHR-1111 or equivalent. each 6 995478

15 NS13 Providing and fixing Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1 Meter Long Spirochrome flex tube & Wall Hook Jaquar make ALD-CHR-587 or equivalent as per approval of Engineer-in-charge each 9 995416

16 NS14 Providing and fixing Towel Ring Round with Round Flange Jaquar make CPA-CHR-1121RD or equivalent. each 5 995478

17 NS15 Providing and fixing Sink Cock with Regular Swinging Spout (Wall Mounted Model) With Wall Flange Jaquar make Aria ARI-CHR-39347S or equivalent as per approval of Engineer-in-charge each 3 995411

18 NS16 Providing and fixing Soap Dish Holder of Jaquar Continental Prime Accessories CPA-CHR-1131 or equivalent as per approval of Engineer-in-charge each 6 995478

19 NS17 Providing and fixing Glass Shelf 600mm Long of Jaquar Continental Prime Accessories CPA-CHR-1171 or equivalent as per approval of Engineer-in-charge each 6 995478

20 NS18 Providing and fixing Soap Dispenser - Push Button capacity: 0.8L material: ABS finish: white/smoked of Jaquar SDR-WHT-DJ0010FN or equivalent as per approval of Engineer-in-charge each 5 995415

21 NS19 Providing and fixing Overhead Shower 100X100mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish) with Rubit Cleaning System of Jaquar OHS-CHR-1665 or equivalent as per approval of Engineer-in-charge each 6 995411

22 NS20 Providing and fixing Shower Arm 20mm dia. & 300mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Flange, Stainless Steel of Jaquar SHA-CHR-479L300S or equivalent as per approval of Engineer-in-charge each 6 995416

1 NS1 Providing and laying 1.1kV Grade PVC insulated Power Cable 3½ X 35 sq. mm MTR 300 998736

2 NS2 Providing and laying 1.1kV Grade PVC insulated Power Cable 3½ X 50 sq. mm MTR 250 998736

3 NS13 Fabrication, supply, erection and commissioning of distribution panel duly painted with apprved shade (approx. dimensions: 1500 mm wide x 2.10 mm ht x 300 mm deep) fabricated out of 2 mm thick CRCA sheet with cover, hinges on one side, locking arrangement on the other side with following MCBs energy meters etc alongwith 0-500 voltmeter(96x96 mm), indicating lamps, toggle swith, slide lock fuse etc including interconnections as required. (1) Incoming 100 A - 4 pole RCCB with 300 mA current sensitivity - 1 no (2) DP 32 A MCB - 7 nos (3) 10-40 A, 1 - ph static Energy Meter - 5 nos (4) 4 strips 100 A tinned Copper Bus bar(50mm x 5mm x 500 mm) - I Set Each 20 84145120

4 NS3 Ceiling Fan (1200 mm sweep). 320RPM, 70 Watts of reputed brand. Nos 4 84145930

5 NS4 Exhaust fan (450 mm sweep for kitchen), 920RPM, 80 Watts of reputed brand. Nos 8 84145190

6 NS5 Exhaust Fans 250 mm sweep for toilet (with louver having bird screen), 2000RPM, 22Watts, Air displacement 240m3/hr of approved brand. Nos 25 94054090

7 NS6 18 W LED Tube Light, Polycarbonate of reputed brand. Nos 30 94051090

8 NS7 14W Bracket Light, Decorative, wall mounting, Champagne Gold finish of reputed brand. Nos 36 94051090

9 NS8 9W Spot light/ Down light, Lifetime up to 35,000 hour(s), Diameter 180 mm, Total lumen output fixture 1575, Light color 6500, Mains power 220-240 of reputed brand. Nos 10 94051090

10 NS9 10W Bulk Head Light, 2.5 kV Voltage surge protection, Lumen : 850 Lm, Power : 10 W, Color Temperature : 6500 K, Life : 25,000 hrs* of reputed brand. Nos 30 85389000

11 NS10 Modular Indicator for switchboard Nos 4 85318000

12 NS11 Door Bell of reputed brand. Nos 1 85371000

13 NS12 Krone type Distribution Board 20 pair of reputed brand. Nos 1 995461

Total Quoted Price in figure for Non-Scheduled Items (Part-B)

#NOTE: The quoted price must be exclusive of GST. GST will be paid extra as applicable corresponding to the SAC Code.

Document Code No.:NESR/RPC/1500-1529/BPS (VOL-IC) Annexure-I to Schedule - 1 of BPS, Vol-IC Direct Total Sole Bidder `

Name of Work: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(SUMMARY OF PRICE PROPOSAL)

Bidder’s Name and Address (Sole Bidder) : To:

Name : Power Grid Corporation of India Ltd., &

Address : NERTS, Lower Nongrah, Lapalang

Shillong - 793006

We declare that following are our Total Bid Prices in Rupees for the expenditure incurred for the entire scope of work as specified in the specifications and documents.We have indicated the Percentage and Amount to the Total Estimated Cost for DSR items and unit rate for each items for Non-DSR items covering the entire scope of works enclosed herewith. In case the bidder does not quote/leave blank against any of the line item, then the rate of that BOQ line item shall be considered deemed included in other quoted rate.If there is any discrepancy in the total quoted price indicated in Price_Schedule Excel Sheet and elsewhere in the E-tender portal, then the prices indicated in Price_Schedule Excel Sheet shall prevail for the purpose of bid evaluation and further action. Direct

SI. No. Item Description Amount

I TOTAL QUOTED PRICE AS CALCUALTED BY THE SYSTEM (IN FIGURE) Part A (Scheduled Items)

II TOTAL QUOTED PRICE AS CALCUALTED BY THE SYSTEM (IN FIGURE) Part B (Non-Scheduled Items)

III TOTAL QUOTED PRICE EXCLUSIVE OF GST (III=I+II) (IN FIGURE)

Note : * While quoting their Percentage component the bidder shall exclude applicable GST. GST shall however be indicated in Schedule-1 (Part-A and Part-B). GST shall be paid extra as applicbale correspnding to the SAC Codes indicated in Schedule-1.

Date: Printed Name :

Place: Designation :

ENVELOPE-1: Techno-Commercial Part (Bid Proposal Sheet).

:: COVER PAGE ::

Name of Package Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

NIT Ref. No.: NER/RPC/OT/1500-1529

Package Code NESH/CSM/SRM/G1/OT/4702-02/BPS-Vol-IB

Specification No. NER/RPC/OT/1500-1529

Address of Purchaser/ Owner General Manager (C&M)

Power Grid Corporation of India Limited.

Dongtieh, Lower Nongrah, Lapalang.

Shillong - 793006.

Phone/Fax -0364- 2536406; Mobile:8837372383

email: [email protected] | [email protected]

General guidelines for filling up the Attachments

: Attachments : Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Specification No.:NER/RPC/OT/1500-1529

Specification No.:NER/RPC/OT/1500-1529

1 Fill up only green shaded cells in the relevent attachments.

2 Attachments 3(QR), Attach QR, 4, 4(A), 4(B), 5, 5(A), 6, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,21 and Bid Form for 1st Envelope are included here.

3 Attachment 1 Bid Security : To be submitted as per proforma provided in the bidding document.

4 Attachment 2 Power of Attorney : No specific format is provided by POWERGRID. Bidder may use their own format.

5 Attachment 8 Manufacturer’s Authorisation Form : Format for Manufacturer’s Authorisation Form is annexed Seperetely herewith this Volume

6 Attachment 14 Integrity Pact : To be submitted as per the proforma Annexed separately herewith this volume.

7 Attachment 18 Safety Pact : To be submitted as per ITB Clause 9.3(s) and as per the proforma Annexed separately herewith this volume.

8 Attachment 19 Declaration of Key Managerial Person and Power of Attorney holder: Format is annexed Seperetely herewith this Volume

9 Attachment 20 Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order December 2018: Format is annexed Seperetely herewith this Volume

10 Attachment 21 Declaration regarding events encountered pursuant to ITB Clause 2.1: Format is annexed Seperetely herewith this Volume

11 Attachment 22 Format for Affidavit of Self certification regarding Local Content in line with PPP-MII order and DoT order, if applicable, to be provided on a non-judicial stamp paper of Rs. 100/-.

12 Attachment Format of ‘Authorization certificate issued by Domestic Manufacturer for selling Domestically Manufactured Iron & Steel Products’

13 Attachment 22: Format for Affidavit of Self Certification regarding Domestic Value Addition in Iron & Steel Products to be provided on a non-judicial stamp paper of Rs. 100/-.

14 Attachment 27:Undertaking by the bidder regarding Compliance of DMI&SP policy

Note : Enable the Active X Control & Macros. Also ensure to keep option of "Trust acess to VBA project object Model" cheched [√]. Ensure that you work on MS Excel 2007 or higher version.

पावर ग्रिड कारपोरेशन ऑफ इण्डिया लिमिटेड

(भारत सरकार का उद्यम)

Power Grid Corporation of India Limited

(A Government of India Enterprises)

General Instruction to the Bidders for filling up this workbook for Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

I While filling up the worksheets following may please be observed :

(i) Fill up only green shaded cells.

(ii) Certain data type entries have been restricted, such as Numeric values or limits of numeric values.

(iii) Select only the options provided in pull down menus.

(iv) Do not link any cell of this work book with any other work book.

(v) Do not use copy & paste or cut & paste options for filling up the data.

(vi) Do not reformat any of the cell of the work book.

Happy Bidding !

Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Specification No.:NER/RPC/OT/1500-1529 Sole Bidder 1

JV (Joint Venture) 2 or More

Enter following details of the bidder

Specify type of Bidder [Select from drop down menu] Sole Bidder Sole Bidder 1

1 JV (Joint Venture) 2 or More

Micro and Small Enterprise (MSE)

Name of Sole Bidder Name

Address of Sole Bidder Principal place of business Add1

Name of other Partner 1

Address of other Partner

Name of other Partner - 2 (more, if any)

Name of other Partner - 2

Address of other Partner - 2

Name of other Partner - 2 (more, if any)

Address of other Partner - 2 (more, if any)

Enter the name of Registration Authority. Udyam Registered Bidder

Whether Medium/Small/Micro Micro

Udyam Registeration No.:

Type of Enterprise

Social Category of Enterpreneur

Printed Name Printed Name

Designation Desig

Date : 5 Sep 2025

Specification No.:NER/RPC/OT/1500-1529 Bid Form 1st Envelope 1 one 1 st 1 January

2 two 2 nd 2 February

BID FORM (First Envelope) 3 three 3 rd 3 March

4 four 4 th 4 April

Bid Proposal Ref. No.: 5 five 5 th 5 May

Date: 6 six 6 th 6 June

7 seven 7 th 7 July

To: 8 eight 8 th 8 August

GM(Contract & Material Department) 9 nine 9 th 9 September

Power Grid Corporation of India Ltd., the Facilities under the above-named package in full conformity with the said Bidding Documents. In accordance with SCC 18.0.0 of the Bidding Documents, as per which the bid shall be submitted by the bidder under “Single Stage - Two Envelope” procedure of bidding. Accordingly, we hereby submit our Bid, in single envelope. " 10 ten 10 th 10 October

North Eastern Region 11 eleven 11 th 11 November

Dongtieh, Lower Nongrah 12 twelve 12 th 12 December

Lapalang, Shillong-793006 (Meghalaya) 13 thirteen 13 th

14 fourteen 14 th

Name of Contract : Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station 15 fifteen 15 th

Dear Ladies and/or Gentlemen, Enter details here. 16 sixteen 16 th

0.0 We meet the eligibility requirements and have no conflict of interest in accordance with ITB Clause 2.

0.0 Attachments to the Bid Form (First Envelope) Bank Draft 18 eighteen 18 th

In line with the requirement of the Bidding Documents, we enclose herewith the following Attachments: Enter details of EMD/ Bid Security here. Pay Order 19 nineteen 19 th

(a) Attachment 1

Bid Security - in orginial (hard copy/ Physical form), for sum of 395000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of POWERGRID Online Payment Utility Portal issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Type of EMD Currency Amount Date of Online Payment through POPU POWERGRID Online Payment Acknowledgment No.: Bid Security - in orginial (hard copy/ Physical form), for sum of 395000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of POWERGRID Online Payment Utility Portal issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. Bid security has not been submitted as our firm is registered under Udyam Registeration. Valid Udyam Registeration Certificate certificate being submitted instead of Bid Security, so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. --------------------------POWERGRID Online Payment Utility Portal Acknowledgment Slip------- ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………. Banks certified Cheque Zero 20 twenty 20 th

OR, Documentary evidence in support of exemption of Bid Security, in separate envelope in accordance with clause 13.1 of ITB, Section-II.

(b) Attachment 2 A power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity in accordance with the ITB Clause 14. POWERGRID Online Payment Utility Portal Rs 395000 Bank Guarantee (Date of Online Payment through POPU) 21 st

© Attachment 3 (QR) The documentary evidence that we are eligible to bid in accordance with ITB Clause 2. Further, in terms of ITB Clause 9.3(c) & (e), the qualification data has been furnished as per your format enclosed with the bidding documents [Attachment – 3(QR)]. FDR 22 th

* Further, the required deed of Joint Venture Agreement signed by us and our Partners has also been furnished as per your format [Attachment – 3(JV)]. Bid Security - in orginial (hard copy/ Physical form), for sum of 395000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of POWERGRID Online Payment Utility Portal issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal. CDR/TDR Applicable 23 th

(d) Attachment 4, 4A: The documentary evidence establishing in accordance with ITB Clause 3, Vol.-I of the Bidding Documents that the facility offered by us are eligible facilities and conform to the Bidding Documents has been furnished as Attachment 4 . Moreover, a list of Special Tools & Tackles to be furnished by us, the cost of which are included in our Bid Price, is also enclosed as per your format as Attachment- 4A. Further, a list of Special Tools & Tackles to be furnished by us, the cost of which are not included in our Bid Price as the same are to be taken back by us after completion, is also enclosed as per your format as Attachment- 4B. Not Applicable 24 th

(e) Attachment 5 : The details of all major items of services or supply which we propose subletting in case of award, giving details of the name and nationality of the proposed subcontractor/sub-vendor for each item. 25 th

(f) Attachment 5A : (Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises): The details of the items, components, raw material, services which is proposed to bought/availed from Micro and Small Enterprises for the purpose of completion of works.

(g) Attachment 6 : The variation and deviations from the requirements of the Conditions of Contract, Bid Data Sheet and other commercial conditions, Technical Specification and Drawings (excluding critical provisions as mentioned at clause 6.0 below) in your format enclosed with the Bidding Documents, including, inter-alia, the cost of withdrawal of the variations and deviations indicated therein. 26 th

(h) Attachment 7: The details of Alternative Bids made by us indicating the complete Technical Specifications and the deviation to contractual and commercial conditions. [NOT APPLICABLE] 28 th

(i) Attachment 8: Manufacturer’s Authorisation Forms 29 th

(i) Attachment 9: Work Completion Schedule

(k) Attachment 10: Guarantee Declaration 30 th

(l) Attachment 11: Information regarding ex-employees of Employer in our firm 31 st

(m) Attachment 12: Filled up information regarding Price Adjustment Data as per the format enclosed in the bidding documents

(n) Attachment 13: Declaration regarding Social Accountability

(o) Attachment 14: Integrity Pact, in a separate envelope, duly signed on each page by the person signing the bid.[NOT APPLICABLE]

(p) Attachment 15: (Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E-payment, PF details and declaration regarding Micro/Small & Medium Enterprises)

(q) Attachment 16: Additional information Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) - NOT Applicable and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

(r) Attachment 17: Declaration for tax exemptions, reductions, allowances or benefits

(s) Attachment 18: Safety Pact

(t) Attachment 19: Declaration

(u) Attachment 19: Local Representation -The details of local representation as per your format enclosed in the Bidding Documents

(v) Attachment 20: Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order and MoP Order December 2018, if applicable

(w) Attachment 21:

(x) Attachment 20: Declaration of Key Managerial Person jointly with Power of Attorney holder

(y) Attachment 21:

(z) Attachment 22: Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order and MoP Order December 2018, if applicable

(aa) Attachment 23: Compliance to the process related to the e-RA Terms & Conditions and the Business Rules governing the e-RA [NOT APPLICABLE]

(ab) Attachment 24: Declaration by the Bidder and its proposed Associate regarding events encountered pursuant to ITB Clause 2.1 (All partners of the Joint Venture in case of Joint Venture bids)

2.2 We are a Micro and Small Enterprise (MSE) registered with

a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012.

0.0 We are aware that, in line with Clause No. 27.1 (ITB), our Second Envelope (Price Part) is liable to be rejected in case the same contains any deviation/omission from the contractual and commercial conditions and technical Specifications other than those identified in this First Envelope.

3.0.A We are a Micro and Small Enterprise (MSE) registered with Name, a designated Authority of GoI under the Public Procurement Policy for MSEs order 2012. (Applicable only for MSE Bidder)

0.0 We confirm that except as otherwise specifically provided our Bid Prices in Second Envelope include all taxes, duties, levies and charges as may be assessed on us, our Sub-Contractor/Sub-Vendor or their employees by all municipal, state or national government authorities in connection with the Facilities, in and outside of India.

0.9 100% of applicable Taxes and Duties i.e. GST, which are payable by the Employer under the Contract, shall be reimbursed by the Employer on production of satisfactory documentary evidence by the Contractor in accordance with the provisions of the Bidding Documents.

0.9 We confirm that we have also registered/we shall also get registered in the GST Network with a GSTIN, in all the states where the project is located and the states from which we shall make our supply of goods.

0.0 Construction of the Contract:

0.9 We declare that we have studied Clause GCC 2.1 relating to mode of contracting for Domestic Bidders and we are making this proposal with a stipulation that you shall award us two separate Contracts viz ‘First Contract’ for ex-works supply of all equipment and materials including mandatory spares and ‘Second Contract’ for providing all the services i.e. inland transportation for delivery at site, In-transit insurance, unloading, handling at site, installation, testing and commissioning including Trial operation in respect of all the equipment supplied under the ‘First Contract’ and other services specified in the Contract Documents.

We declare that the award of two contracts, will not, in any way, dilute our responsibility for successful operation of plant/equipment and fulfillment of all obligations as per Bidding Documents and that both the Contracts will have a cross-fall breach clause i.e. a breach in one Contract will automatically be classified as a breach of the other contract which will confer on you the right to terminate the other contract at our risk and cost.

(i) Single Contract shall be awarded for the subject package.

(ii) The Contracts to be entered into with the successful Bidder shall be as under: First Contract (Supply of Goods and Related Services Contract): For Ex-Works supply of all Goods and Type Test to be conducted (whether in India or abroad) and for providing all services i.e. inland transportation for delivery at site, In-transit insurance and loading and Supervision Charges, if applicable and any other services specified in the Contract Documents

0.0 We have read the provisions of following clauses and confirm that the specified stipulations of these clauses are acceptable to us:

(a) ITB 13 Bid Security

(b) GCC 2.14 Governing Law

( c) GCC 5.1 Contractor’s Responsibilities

(d) GCC 8 Terms of Payment

(e) GCC 9.3 Performance Security

(f) GCC 10 Taxes and Duties

(g) GCC 21.2 Completion Time Guarantee

(h) GCC 22 Defect Liability

(i) GCC 23 Functional Guarantee

(j) GCC 25 Patent Indemnity

(k) GCC 26 Limitation of Liability

(l) GCC 38 Settlement of Disputes

(m) GCC 39 Arbitration

(n) Appendix 2 to Form of Contract Agreement Price Adjustment

Further we understand that deviation taken in any of the above clauses by us may make our bid non-responsive as per provision of bidding documents and be rejected by you.

0.0 We undertake, if our bid is accepted, to commence the work immediately upon your Notification of Award (NOA)/ Letter of Award (LOA) to us, and to achieve the delivery of goods and related services within the time stated in the Bidding Documents.

0.0 If our bid is accepted, we undertake to provide a Performance Security in the form and amounts, and within the times specified in the Bidding Documents.

0.0 We agree to abide by this bid for a period of 06 (Six) months/180 (One Hundred Eighty) Days, which ever is later from the date fixed for opening of bids as stipulated in the Bidding Documents, and it shall remain binding upon us and may be accepted by you at any time before the expiration of that period.

0.0 Until a formal Contract is prepared and executed between us, this bid, together with your written acceptance thereof in the form of your Notification of Award shall constitute a binding contract between us.

0.0 We understand that you are not bound to accept the lowest or any bid you may receive.

0.0 Commissions or gratuities, if any, paid or to be paid by us to agents relating to this Bid, and to contract execution, if we are awarded the contract, are listed below:-

Name and address of agent Amount and Currency Purpose of Commission or gratuity

(If none, state “none”)

0.0 # (For Joint Venture only) We, the partners of Joint Venture submitting this bid, do agree and confirm that in case of Award of Contract on the Joint Venture, we shall be jointly and severally liable and responsible for the execution of the Contract in accordance with Contract terms and conditions.

0.0 We, hereby, declare that only the persons or firms interested in this proposal as principals are named here and that no other persons or firms other than those mentioned herein have any interest in this proposal or in the Contract to be entered into, if the award is made on us, that this proposal is made without any connection with any other person, firm or party likewise submitting a proposal is in all respects for and in good faith, without collusion or fraud.

Thanking you, we remain,

Yours faithfully,

For and on behalf of Name

Date : 5/ Sep/2025 Printed Name : Printed Name

Place : Place Designation : Desig

Please provide additional information of the Bidder

Business Address :

Country of Incorporation :

State/Province to be indicated :

Name of Principal Officer :

Address of Principal Officer :

Note: Bidders may note that no prescribed proforma has been enclosed for NER/RPC/OT/1500-1529Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

Note: Bidders may note that no prescribed proforma has been enclosed for NER/RPC/OT/1500-1529 Power of Attorney. Bidders may use their own proforma for furnishing the required information with the bid.

Specification No.:NER/RPC/OT/1500-1529 Attachment-1

Package:: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Bid Security/Bid Guarantee)

Bidder’s Name and Address:( Sole Bidder) To,

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Bid Security - in orginial (hard copy/ Physical form), for sum of 395000 submitted in a separate envelope in accordence with Cl.No.2.0.0 of SCC, in the form of POWERGRID Online Payment Utility Portal issued by initially valid upto 00/01/1900 so as to reach C&M Department of POWERGRID, Shillong before deadline for submission of Bid specified in SCC. The soft/scanned copy is uploaded through the portal.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-2

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Power of Attorney)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We have enclosed copy of the power of attorney duly authorized by a Notary Public indicating that the person(s) signing the bid have the authority to sign the bid and thus that the bid is binding upon us during the full period of its validity.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-3(QR)

Package : Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Qualifying Requirement Data)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

As per 04-Annexure-A (BDS)-QR

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-4

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Form of Certificate of Origin and Eligibility)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

The following is list of our Sub-Contractors proposed to be engaged by us for the above work in the event of award on us. However, the overall responsibility for supervision, quality and timely execution of the contract shall remain with us. We shall be fully responsible for any acts and omission on the part of the above Sub-contractor or any persons engaged by them in connection with the above work.

Sl. No. Name & Address of Sub-Contractor Nature of Work

country. country.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-4(A)

Packahge: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(List of Special Maintenance Tools & Tackles)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We are furnishing below the list of special maintenance tools & tackles for various equipment under the subject package. The prices for these tools & tackles are included in our lumpsum bid price. We further confirm that the list of special maintenance tools & tackles includes all the items specifically identified in your bidding documents as brought out below:

S.No. For Equipment Item Description Unit Quantity

Notwithstanding what is stated above, we further confirm that any additional special maintenance tools and tackles, required for the equipment under this package shall be furnished by us at no extra cost to the employer.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-5

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

( Sub-contracted Items)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

2. We hereby declare that we would not subcontract the erection portion of the contract withot prior approval of the Employer

3. In line with ITB Clause 9.3 (e), we intend to supply following items which are to be manufactured within Arunachal Pradesh

We futher declare that we would source material/services for atleast 30% of the Installation Price of Second /Services contract from within Arunachal Pradesh

Sl. No. Item Description Quantity proposed to be bought/ subcontracted Detail write up to engage local sub contractor/sub vendor

For additional write up, extra sheet may be attached to the bid.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : 5 Sep 2025 Printed Name : Printed Name :

Place : Place Designation : Designation :

Specification No.:NER/RPC/OT/1500-1529 Attachment-5(A)

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Items, Components, Raw Material, Services proposed to be sourced from Micro and Small Enterprises)

Bidder’s Name and Address:( Sole Bidder) To,

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

1. We hereby furnish the details of the items, components, raw material, services which we propose to buy/avail from Micro and Small Enterprises (MSEs) for the purpose of completion of works under the package

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Name of Micro and Small Enterprises (MSEs)

Name & Address Category

We hereby furnish the details of the items/ sub-assemblies propose to supply from our own works (i.e. as direct transactions) in additiona to the supplies the same from other vendors (i.e. as Bought-out transactions) as detailed in the table given above.

Sl. No. Item Description Quantity proposed to be supplied Details of the plant from where supplies are proposed.

Name of Plant Address

2. The above is a list of items we propose to procure from MSEs. However, based on the situations during the execution of the contract, the above list may undergo changes. We hereby confirm that the details regarding actual procurement from MSEs carried out by us, as per the format provided at Section VI, Forms and Procedures, Volume-I of bidding documents, shall be submitted along with the bills for payment against supplies made/works done during execution of contract. .

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-5(A)

(Bought-out & Sub-contracted Items)

Sl. No. Item Description Quantity proposed to be bought/sub-contracted Details of the proposed sub-contractor/sub-vendor

Name Nationality

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-6

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Alternative, Deviations and Exceptions to the Provisions)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

The bidder shall itemize any deviation from the Specifications included in his bid. Each item shall be listed (separate sheets may be used and enclosed with this Attachment) with the following information:

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

The above deviations and variations are exhaustive. We confirm that we shall withdraw the deviations proposed by us at the cost of withdrawal indicated in this attachment, failing which our bid may be rejected and Bid Security forfeited.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Annexure I toAttachment-6

(Alternative, Deviations and Exceptions to the Provisions)

Sl. No. Reference clause in the Specifications Deviation Cost of withdrawal of the deviation

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-7

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Details of Alternative Bid)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

No Alternative Bid

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-8

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Manufacturer's Authorization Form)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

WE …….(insert name of the Manufacturer)…….. who are established and reputable manufacturers of ……..(insert name and/or description of the goods)……. having production facilities at ……..(insert address of factory)……. do hereby authorize ………(insert name & address of Bidder)……….. (hereinafter, the “Bidder”) to submit a bid, and subsequently negotiate and sign the Contract with you against IFB for …….(insert name of the package alongwith the project name)……….. including the above plant & equipment or other goods produced by us.

We hereby extend our full guarantee and warranty for the above specified goods offered supporting the supply by the Bidder against these Bidding Documents, and duly authorize said Bidder to act on our behalf in fulfilling these guarantee and warranty obligations. We also hereby declare that we and ……(insert name of the Bidder)………. have entered into a formal relationship in which, during the duration of the Contract (including warranty/defects liability). We, the Manufacturer or Producer, will make our technical and engineering staff fully available to the technical and engineering staff of the successful Bidder to assist that Bidder, on a reasonable and best effort basis, in the performance of all its obligations to the Purchaser under the Contract.

For and on behalf of the Manufacturer Signed: _______________________________________________________________ Date: __________________________________ In the capacity of …….. (insert title of position or other appropriate designation)…….. Date:.................... (Signature).......................……….. Place:................... (Printed Name)...............................…. (Designation)................……………........ (Common Seal).………............................

Note.:1. The letter of Undertaking should be on the letterhead of the Manufacturer and should be signed by a person competent and having Power of Attorney to legally bind the Manufacturer. It shall be included by the bidder in its bid. 2. Above undertaking shall be registered or notarized so as to be legally enforceable.

Specification No.:NER/RPC/OT/1500-1529 Attachment-9

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Work Completion Schedule)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We hereby declare that the following Work Completion Schedule shall be followed by us in furnishing and installation of the subject Package i.e., Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station for the period commencing from the effective date of Contract to us :

Sl. No. Description of Work Period in months from the effective date of Contract

Nos. Unit Remarks

1 Mobilization at site

2 Source identification of Materials

3 Commencement of Work

4 Completion of Work

5 Overall Completion Schedule

Bidders to enclose a detailed network covering all the activities to be undertaken for completion of the project indicating key dates for various milestones for each phase constituent-wise.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-10

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Defect Liability)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We accept that the work executed by us in case of award shall be liable for Defect liability period as per SCC reckoned from the date of Completion of works/taking over of the site under the contract. We, shall be responsible to make good and remedy at our own expense within such period, any defect which may develop or may be noticed before the expiry of Defect Liability Period and which arises from either: a) Any defective workmanship or b) An act of commission, of the Contractor during the defect liability period. We, shall make good the defects & damages immediately at our own cost to match the original specifications to the satisfaction of the Engineer-in-Charge.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-11

Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Information regarding Ex-employees of POWERGRID in our Organisation)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We declare that we are aware of and have gone through the "Code of Business Conduct and Ethics for Senior Management Personnel" and "Code of Business Conduct and Ethics for Board Members" of POWERGRID (hereinafter referred to as the "Code of Conduct"). We further understand that as per the "Code of Conduct", Senior Management Personnel including Board Members, who have retired / resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred "Code of Conduct", within 1 year from the date of cessation of service / directorship unless approved by the Competent Authority.

Accordingly, We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

*In case the date of joining in the bidder's organization of such ex-employee is within 1 year from the date of retirement / resignation from POWERGRID, No Objection Certificate / approval from the Competent Authority must be furnished alongwith the bid or subsequent through clarification pursuant to ITB Clause 21.

In case of non-submission of No Objection Certificate / approval of the Competent Authority, as required, We understand that POWERGRID shall deal with such cases as per its Policy and Procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard.

We further declare that any misrepresentation or submission of false / forged documenmts / information in this regard shall be dealt with as per the provisions of the Integrity Pact and / or the Bidding Documents and / or POWERGRID's policy and procedure.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

1. "Code of Business Conduct and Ethics for Senior Management Personnel" and "Code of Business Conduct and Ethics for Board Members" are available on POWERGRID's website http://www.powergrid.in.

2. The information in similar format should be furnished for each partner of joint venture in case of joint venture bid.

3. In case bidder has furnished no details on ex-employees of POWERGRID or has left blank or has indicated '-' against the same, it shall be deemed that they have not employed any such person in their organization.

Specification No.:NER/RPC/OT/1500-1529 Attachment-12

Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Price Adjustment Data)

Bidder’s Name and Address (Sole Bidder): To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We hereby furnish the relevant details pertaining to the price adjustment provisions for equipment as specified in your specifications and documents for the subject package. The necessary documentary evidence is enclosed.

Sr. No. Name of Materials/Labour Value of co-efficient Name of the published index Value of index as 30 days prior to date set for opening of bids

In accordance with Clause 2, Appendix-2, Form of Contract Agreement, Section-VI; Forms. Volume-I

A. Price Adjustment for Erection Price Component

1 Erection price component {including Civil Works but excluding ‘Supply & Placement of reinforcement steel’ and ‘Concreting’}

i) High Speed Diesel, coefficient a = Wholesale Price Index Number for `HSD’ (Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)

ii) Labour, coefficient l = Indian field labour index – namely All-India Average Consumer Price Index Numbers for Industrial Workers (monthly) (Base 2016=100), as published by Labour Bureau, Shimla, Government of India (http://labourbureaunew.gov.in)

Coefficient ‘a’ shall be between 0.20 to 0.24 and Coefficient ‘l’ shall be between 0.56 to 0.60 and sum of Coefficients ‘a’ and ‘l’ shall be 0.80

2 Supply and placement of reinforcement steel

i) HSD, a= Wholesale Price Index Number for `HSD’ (Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)

ii) Labour, l= Indian field labour index – namely All-India Average Consumer Price Index Numbers for Industrial Workers (monthly) (Base 2016=100), as published by Labour Bureau, Shimla, Government of India (http://labourbureaunew.gov.in)

iii) Manufacture of Basic Metals, b= Wholesale Price Index Number for `Manufacture of Basic Metals’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

Coefficient ‘a’ shall be between 0.09 to 0.11, Coefficient ‘b’ shall be between 0.63 to 0.67 and coefficient ‘l’ shall be between 0.04 to 0.06 and sum of Coefficients ‘a’, ‘b’ and ‘l’ shall be 0.80

3 For Concereting

i) HSD, a= Wholesale Price Index Number for `HSD’(Individual Commodity) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in)

ii) Labour, l= Indian field labour index – namely All-India Average Consumer Price Index Numbers for Industrial Workers (monthly) (Base 2016=100), as published by Labour Bureau, Shimla, Government of India (http://labourbureaunew.gov.in)

iii) Manufacture of cement, lime and plaster, b= Wholesale Price Index Number for `Manufacture of cement, lime and plaster’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry (www.eaindustry.nic.in)

iv) Cutting, shaping and finishing of stone, c= Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

Coefficient ‘a’ shall be between 0.18 to 0.22, Coefficient ‘b’ shall be between 0.25 to 0.35, Coefficient ‘c’ shall be between 0.18 to 0.22 and Coefficient ‘l’ shall be between 0.09 to 0.11 and sum of Coefficients ‘a’, ‘b’, ‘c’ and ‘l’ shall be 0.80

The Bidders are required to estimate and indicate the values of different coefficients for each of the items in the price variation formulae within the specified range such that their summation is as specified in the Bidding Documents. Where no value or ‘-’ or ‘shall be furnished later’ is specified against the coefficient, the same will be deemed to be zero and the fixed component would be suitably adjusted. If the values of all coefficients in price variation formulae indicated by the Bidder are within the specified range but their sum exceeds the summation specified in the Bidding Documents, the values of the coefficients shall be pro-rata adjusted such that the summation remains as per the provisions of the Bidding Documents. If the values of all coefficients indicated by the Bidder are within the specified range but their summation is less than the value specified in the Bidding Documents, the values of the coefficients as indicated by the Bidder shall be considered as such and the fixed component in the price variation formulae would be suitably adjusted. Further, if any of values of the coefficients indicated by the Bidder is out of the range specified in the Bidding Documents, the lower of the values, as indicated by the Bidder vis-à-vis lower value of the range for that coefficient specified in the Bidding Documents, shall be considered and the fixed component would be suitably adjusted.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-13

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Declaration regarding Social Accountability)

Bidder’s Name and Address:( Sole Bidder) To:

Contract & Material Department

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongkteih, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org) and maintain the necessary records.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-14

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-15

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Option for Initial Advance (either Interest Bearing Initial Advance or No Initial Advance) and Information for E – payment, PF details and declaration for Micro/Small and Medium Enterprise

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

I We have read the provisions in the Bidding Documents regarding furnishing the option for advance payment. Accordingly, as per ITB Clause 9.3 as provided in Section BDS, Section III, Vol.-I of the Bidding Documents, we hereby confirm to opt the following:

Interest Bearing Initial Advance

Supply Portion: NOT APPLICABLE No

Services Portion: NOT APPLICABLE No

II Contract performance Guarantee will be submitted: Bank Guarantee

(Select from drop down list)

III We are furnishing the following details of Statutory Registration Numbers and details of Bank for electronic payment.

1 Name of the Supplier/ Contractor in whose favour payment is to be made

2 Address with PIN Code and State

Registered Office:

Correspondence Address:

3. (a) Status – Company/others

[Declaration of Micro/ Small/ Medium Enterprise under Micro/ Small & Medium Enterprises Development Act 2006, if applicable]

3. (b) Are you a MSE owned by SC/ST* entrepreneurs in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012 including subsequent amendment/notification/order [Indicate Yes / No]

Note: Documentary evidence is to be attached. Please refer remarks at the end of the attachment.

3. (c) If 3(b) is 'Yes' please mention whether you are (Proprietary MSE/ Partnership MSE/ Private Limited Company) owned by SC/ST entrepreneurs

3. (d) Are you a MSE owned by women in line with Public Procurement Policy for Micro and Small Enterprises (MSEs) order 2012, Public Procurement Policy for Micro and Small Enterprises (MSEs) Amendment Order 2018 including subsequent amendment/notification/order [Indicate Yes / No]

Note: Documentary evidence is to be attached.

4 Permanent Account (PAN) No.

5 GSTIN Numbers

I. GSTIN in the Sates/UT from where the supply of goods take place

Name of the States/UT GSTIN number

II. GSTIN in the States/UT where the supply of services take place (states where sites under the subject package is situated)

Name of the States/UT GSTIN number

9 PF Registration No. of the Company

10 PF Regional Office covered (with Address)

11 Name of Contact Person

12 Contact Details

13 Bank Details for Electronic Payment

Name of the Bank:

Address of Branch:

Type of Account: Saving Account

14 9 digit MICR code printed at bottom in middle, next to cheque no.

15 IFSC (for RTGS)/NEFT Code (to be obtained from the Bank) Sample Cancelled Cheque to be enclosed

We hereby declare that the above information are true and correct and we agree that the payment on account of this Contract, in the event of award, be made in the above account maintained in the above mentioned Bank.

Remarks: The definition of MSEs owned by SC/ST is as given under:

a. In case of proprietary MSE, proprietor(s) shall be SC/ST.

b. In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit.

c. In case of Private Limited Companies, at least 51% share shall be held by SC/ST promoters.

Documentary Evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-16

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Additional Information)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

In support of the additional information required, we furnish herewith our data/details/documents etc., alongwith other information, as follows (the stipulations have been reproduced in italics for ready reference):

0.0 The Bidder shall furnish

A certificate from their Banker(s) (as per prescribed formats in Section-VI: Sample Forms and Procedures) indicating various fund based/non fund based limits sanctioned to the Bidder and the extent of utilization as on date. Such certificate should have been issued not earlier than three months prior to the date of bid opening. Wherever necessary the Employer may make queries with the Bidders’ Bankers.

1.1 In accordance with 1.0, certificate(s) from banker as per requisite format, indicating various fund based/non fund based limits sanctioned to the bidder or each member of the joint venture and the extent of utilization as on date is/are enclosed, as per the following details:

Name of the Bidder (Sole Bidder) Name

Name of the Banker by whom certificate issued

Date of certificate (should not be earlier than 3 months prior to date of bid opening)

Whether fund based/non fund based limits are indicated in the certificate

Whether extent of utilization is indicated in the certificate

1.2 The Bidder should accordingly also provide the following information/documents

(i) Details of Banker:

Address of Banker

Contact Name and Title

(ii) As per para 1.0, Authorizatio Letter(s) from the bidder (in case of JV bidder, from all the partners) addressed to the Banker(s), authorizing POWERGRID to seek queries about the bidder with the Banker(s) and advising the Banker(s) to reply the same promptly, is/ are enclosed as per following details:

Sl. No. Lette Ref. Date Addressed to (name of the Bank)

0.0 Litigation History

The bidder should provide detailed information on any litigation or arbitration arising out of contracts completed or under execution by it over the last five years. A consistent history of awards involving litigation against the Bidder or any partner of JV may result in rejection of Bid.

2.1 Details of litigation history resulting from Contracts completed or under execution by the bidder over the last five years

Year Name of client, cause of litigation/arbitration and matter in dispute Details of Contract and date Award for or against the bidder Disputed amount

0.0 Details regarding previous transgressions of Integrity Pact

The bidder should provide detailed information on any transgression of Integrity Pact that occurred in the last 10 years with any other Public Sector Undertakig or Government Department or any other Company, in any country.

3.1 Details regarding previous transgressions of Integrity Pact that occurred in the last 10 years

Year Name of Client Details of Transgression of Integrity Pact by the Bidder

0.0 OTHER INFORMATION

4.1 Current Contract Commitments of works in progress

Bidders should provide information on their current commitments on all contracts that have been awarded, or for which a letter of intent or acceptance has been received, or for contracts approaching completion, but for which an unqualified, full completion certificate has yet to be issued.

Details of Contract Value of outstanding work (Rs.) Estimated completion date

4.2 Financial Data:

Details Actual (Previous five years) Projection for next five years

Total Liability

Current Liability

Profit before taxes

Profit after taxes

4.3 Provident Fund Code Number of the Bidder:

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-17

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Declaration for tax exemptions, reductions, allowances or benefits)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

1 We confirm that we are solely responsible for obtaining following tax exemptions, reductions, allowances or benefits in respect of supplies under the subject package, in case of award. We further confirm that we have considered the same in our bid thereby passing on the benefit to POWERGRID while quoting our prices. In case of our failure to receive such benefits, partly or fully, for any reason whatsoever, the Employer will not compensate us.

2 We are furnishing the following information required by the Employer for issue of requisite certificate if and as permitted in terms of the applicable Govt. of India policies/procedures (in case of award):

Applicable Act, Notification No. and Clause Ref. No. Sl. No. Description of item on which applicable Country of origin Remarks, if any

(The requirements listed above are as per current Notification of Govt. of India indicated above. These may be modified, if necessary, in terms of the Notifications.)

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-17

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

GM(Contract & Material Department)

Name : …… ……. …….. …… ……. …….. Power Grid Corporation of India Ltd.,

Address : …… ……. …….. …… ……. …….. North Eastern Region

…… ……. …….. …… ……. …….. Dongtieh, Lower Nongrah

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 5 Sep 2025 Printed Name : Printed Name :

Place : Place Designation : Designation :

Specification No.:NER/RPC/OT/1500-1529 Attachment-17

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Information regarding Ex-employees of POWERGRID in our Organisation)

Name(s) and Addresse(s) of other partner(s) To:

GM(Contract & Material Department)

Name : Power Grid Corporation of India Ltd.,

Address : North Eastern Region

Dongtieh, Lower Nongrah

We hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of General Manager and above from POWERGRID and subsequently have been employed by us:

Sl. No. Name of the person with designation in POWERGRID Date of Retirement/ resignation from POWERGRID Date of joining and designation in our organisation

Date : 5 Sep 2025 Printed Name : Printed Name :

Place : Place Designation : Designation :

Specification No.:NER/RPC/OT/1500-1529 Attachment-18

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Date : Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-17

Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Further, we hereby confirm that except as mentioned in the Attachment – 5 (Alternative, Deviations and Exceptions to the Provisions) hereof forming part of our First Envelope :

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-21

Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Public Procurment Policy PPP-MII Certification)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Affidavit of Self certification regarding Minimum Local Content in line with PPP-MII order, if applicable (submission of Hard Copy in ‘Original’), to be submitted on a non-judicial stamp paper of Rs. 100/. In line with the PPP-MII order, the bidder shall submit the Affidavit of self-certification, in original, certifying that the item offered meets the Minimum Local Content and shall give details of the location(s) at which value addition is made, as prescribed in the PPP-MII Order 2017, on a non-judicial stamp paper of Rs. 100/-. Further, false declaration regarding Local Content by the bidder shall be a transgression of Integrity Pact and action shall be taken in line with provisions of the Integrity pact and in line with the provisions of the PPP-MII Order.

Format enclosed

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-22

Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

(Public Procurment Policy PPP-MII Certification)

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, in line with PPP-MII order, if applicable (submission of Hard Copy in ‘Original’) to be submitted on the letter head of the auditor/ cost accountant/chartered accountant In line with the PPP-MII order, the bidder shall submit certificate from statutory auditor or cost auditor of the company (in the case of companies) or from a practicing cost accountant or practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of Local Content, if applicable, on the letter head of the auditor/chartered accountant. Further, false declaration regarding Local Content in the aforesaid certificate submitted by the bidder shall be a transgression of Integrity Pact and action shall be taken in line with provisions of the Integrity pact and in line with the provisions of the PPP-MII Order.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-23

Package: Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Declaration regarding adherence to the POWERGRID Whistle Blower and Fraud Prevention Policy

Bidder’s Name and Address:( Sole Bidder) To:

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

We, hereby, declare that we, along with our associate/ collaborators/ sub-contractors/ sub-vendors/consultants/ service providers shall strictly adhere to the POWERGRID Whistle Blower and Fraud Prevention Policy. We, along with our associate / collaborator / subcontractors / sub-vendors / consultants / service providers shall observe the highest standard of ethics and shall not indulge or allow anybody else working in our organization to indulge in fraudulent activities during execution of the contract and would immediately apprise the Employer about any fraud or suspected fraud as soon as it comes to our notice.

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig

Specification No.:NER/RPC/OT/1500-1529 Attachment-18

Construction of 1(one) no. B3-type (G+1) structure accommodating Community Centre, Bachelor’s accommodation and Residential quarter at Roing Sub-Station

Bidder’s Name and Address:( Sole Bidder) To,

GM(Contract & Material Department)

Name : Name Power Grid Corporation of India Ltd.,

Address : Add1 North Eastern Region

Add2 Dongtieh, Lower Nongrah

Lapalang, Shillong-793006 (Meghalaya)

Sl. No. Item Description Reference Declaration (Strike out whichever is not applicable)

1 Bid Guarantee enclosed in separate sealed envelop (one original plus two copies) & submitted in physical form As per ITB Cl No. 13

2 Commercial deviation schedule filled in Attachment-6, BPS, Vol-IB

3 Technical deviation schedule filled in Attachment-6, BPS, Vol-IB

4 List of Subcontractors schedule fillid in Attachment-5, BPS, Vol-IB

5 Additional information included with this Proposal Attachment-16, BPS, Vol-IB

6 Work schedule filled in Attachment-9, BPS, Vol-IB

7 Schedule on information regarding Ex-employees of POWERGRID in the firm filled in Attachment-11, BPS, Vol-IB

8 Intergity Pact Attachment-14, BPS, Vol-IB

9 (Public Procurment Policy PPP-MII Certification) Minimum Local Content Attachment-21, BPS, Vol-IB

10 (Public Procurment Policy PPP-MII Certification)Undertaking by the bidder regarding Compliance of DMI&SP policy Attachment-27, BPS, Vol-IB

11 Declaration Regarding Social Accountability Attachment-13, BPS, Vol-IB

Date : 5 Sep 2025 Printed Name : Printed Name

Place : Place Designation : Desig