REPAIR TO FLOORING, PLASTERING, JOINERY, PLUMBING WORK (INTERNAL AND EXTERNAL) IN PINTO PARK AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT - 10

Amount

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

M&L for cutting holes in brick walls, built in cement mortar or cement lime mortar, exc one brick but n.exc two bricks wall thick, for inserting angle iron of cooler stand or hold fasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 upto four storey buildings as required including scaffolding for four storey building complete all as specified and as directed. .

M&L for cutting holes in brick/RCC walls or PCC/ RCC steps, built in cement mortar for inserting hold fasts including angle iron (50x50x5)mm for step nosing and 10cm long flat iron (25x3)mm as hold fast and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and as directed.

M&L for cutting chases, pinning in, brick work and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc, upto 4th storey complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and as directed.

Dismantling of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc. 15cm thickness (below or above ground level) including removal of debrish out of MoD Land complete all as specified and as directed.

Description all as per ser item No. 8.00 above but thickness of floor exceeding 15 cm above ground floors complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling water tanks exc 250 & n exc 500 Ltrs capacity and removing to contractor's store complete all as specified and as directed.

Taking up or down 15mm steel tubing, bore of pipe in 15mm and connections in walls, ceiling, floors, etc including cleaning for refixing complete all as specified and as directed.

Taking up or down 20mm steel tubing, bore of pipe in 15mm and connections in walls, ceiling, floors, etc including cleaning for refixing complete all as specified and as directed.

Taking down CI, AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Description all as per ser item No. 14.00 above but 75/80 mm dia pipes complete all as specified and as directed.

Description all as per ser item No. 14.00 above but 150 mm dia pipes complete all as specified and as directed.

Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area n exc. 1.5 sqm each complete all as specified and as as directed.

Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as as directed.

Taking down shutters of any description area exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Taking down shutters of any description area exc 1 Sqm and n exc 2 Sqm each and refixing in the same opening after necessary repairing viz shifting of hinges/ tower bolt/handle position etc., complete all as specified and as directed. Note:- Cost of screws, misc items shall be deemed to be included in the quoted rates.

Dismantling of wrought iron mild steel work any type any description not otherwise provided for complete all as specified and as directed.

Hacking out old broken glass, any thickness, size, quality, or description from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete upto 4th storey complete all as specified and as directed.

Taking down of existing tarfelt/mud and cement plaster of any description and thickness on roof top including flashing and junction of parapet and cleaning existing roof top surface by brooming , wire brushing including removing the debrish out of MOD land complete all as specified and as directed.

Demolition of brick tiles single layer on roofs laid dry or with cement mortar complete all as specified and as directed.

Dismantling of mud in roof, any thicknees including plastering & leeping (whether full or part) and removal of debris out of MOD land or depositing where directed complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Description all as per ser item No. 26.00 above but except bricks complete all as specified and as directed. Note:- Old bricks shall be retrieved from Ser item No. 1.00 here in before.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement morter (1:4), surface finised even and smoth with liqiuid water proofing compound by weight as per manufacture's instructions upto and including 4th storey complete all as specified and as directed. Note:- Liquid WPC shall be measured and paid separately and cost of scaffolding shall be deemed to be included in the item.

M&L for 10mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceilings, surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of primer complete all as specified and as directed.

M&L for preparation of surfaces plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and shade complete all as specified and as directed.

M&L for preparation of new plasterd or unplasterd external wall/ceiling surface and applying two coat of weather proofing exterior acrylic emulsion paint over priming coat premium quality, sand papering, surface even and smooth for (G+3) buildings complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of primer complete all as specified and as directed.

M&L for anti skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Description all as per ser item No. 35.00 above but as in skirtings laid over 10mm thick plaster in CM (1:4) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in as vertical surfaces of size (450x300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for vitrified tiles coloured, light shade 10 mm thick, area of each tile n exc 0.36 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Description all as per ser item No. 39.00 above but as in skirting /dado laid over and including 10 mm thick bedding layer of CM (1:4) complete all as specified and as directed.

M&L 20mm thick Granite (of any type or any colour) work (table rubbed and polished) as in steps, jambs, walls, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for machine cut Kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete laid over and including 10mm thick rendering in CM (1:4) complete all as specified and as directed.

M&L for 16 to 18mm thick green marble slabs (of any type) work (table rubbed and polished) as in steps, risers, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over and including15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for making holes on kitchen platform in any thickness of slab, facilitate to insert gas pipe in appropriate size and shape complete all as specified and as directed.

M&L for factory made chequered cement concrete tiles of size (30cm x 30cm) x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for machine pressed precast concete interlocking paver block, 60 mm thickness, M-35 Grade any shape and size with grey cement and pigment complete all as specified and as directed.

M&L for stone hard core of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for providing cement concrete (1:4:8) type D-2, (using 40mm graded stone aggregate) as in foundations, filling, mass concrete and sub-base including use and waste of necessary form work complete all as specified and as directed.

M&L for 25mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protections, to be finished even and smooth without using extra cement complete including use and waste of necessary form work complete all as specified and as directed.

M&L for 25mm thick precast cement concrete louvers and jallies, type C-0, (1:3:6), set in cement mortar (1:6) (measured solid), including all mouldings complete all as specified and as directed.

M&L for cement concrete type B-1, (1:2:4) (20 mm graded stone aggregate) as in copings, window cills, kerb stone for foot path and similar items with plain fair finishing including chamfers, weathering, throating etc and set in CM (1:4) complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, slabs hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for RCC (Nominal Mix), type B-1, (1:2:4) (using 20mm graded stone aggregate) as in slabs supported on walls/beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of formwork to soffits and sides of slabs/ platform or suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

S&F for 500 ltr rotational moulded polyethylene water storage tanks, white, three layered (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and as directed.

S&F ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M&L for GI tubing 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

M&L for GI tubing 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with and including suitable PVC clamps at one meter of interval complete all as specified and as directed.

Description all as per ser item No. 61.00 above but 75 mm bore dia complete all as specified and as directed.

Description all as per ser item No. 61.00 above but 150 mm bore dia complete all as specified and as directed.

S&F in repairs for PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.

Description all as per ser item No. 64.00 above but 75 mm bore dia complete all as specified and as directed.

Description all as per ser item No. 64.00 above but 150 mm bore dia complete all as specified and as directed.

S&F in repairs for PVC junction single, (Single T) equal or unequal, suitable for 100/ 110mm dia of PVC pipes fixed complete all as specified and as directed.

Description all as per ser item No. 67.00 above but 75 mm bore dia complete all as specified and as directed.

Description all as per ser item No. 67.00 above but 150 mm bore dia complete all as specified and as directed.

S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framing for doors cladding, chowkhats/frame or cooler stand like etc welding hold fast, hinges and making surface good and matching with existing surface complete all as specified and as directed.

S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with decorative face laminated on both side complete all as specified and as directed.

M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered head s for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and as directed.

S&F factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening and making surface good and matching with existing surface complete all as specified and as directed.

Supply and fixing for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

S & F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars complete all as specified and as directed.

M&L for framed work such as grills, gratings etc with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed and making surface good and matching with existing surface complete all as specified and as directed.

S&F 2nd class softwood plain fillets sectional area exc 13 sq cm and n. exc 25 sq cm square, rectangular or triangular in section, clean sawn, secured with nails or beads and making surface good and matching with existing surface complete as specified and as directed.

M&L for cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) for fixing of hold fasts and clamps etc complete all as specified and as directed.

S & F in repalcement for 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws as in cup boards, shelves and pelmet boxes etc complete all as specified and as directed.

M&L for plywood 6mm thick (5 Nos of ply), grade BWR, type BB, fixed with screws to wooden frame work complete all as specified and as directed.

S & F continuous (piano) hinges, width of flaps 30mm (when opened) stainless steel, bright finish or electro galvanised complete all as specified and as directed.

S&F MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts of extruded section length of bolt 200mm long complete all as specified and as directed.

S&F aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm long complete all as specified and as directed.

S&F aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast alluminium alloy cincluding a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S&F extruded aluminium alloy cold rolled handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.

S&F extruded aluminium alloy cold rolled handles, anodised fabricated type, 100 mm size complete all as specified and as directed.

S&F aluminium anodised hasp & staple including bolt hinge plate and fixed with screws 100mm size complete all as specified and as directed.

S&F aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete all as specified and as directed.

S&F mild steel 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete, fixed with screws to wooden frame or welding to steel frames etc complete all as specified and as directed.

S&F 40mm size stainless steel nobs complete all as specified and as directed.

S&F in repairs for galvanised mild steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples and welding complete all as specified and as directed.

Supply and fixing for sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane upto 4th storey complete all as specified and as directed.

Description all as per ser item No. 95.00 above but exc 0.50 Sqm in each pane complete all as specified and as directed.

S&F in repair 25mm/ 30mm dia aluminium powder coated fancy type curtain rods with and including all fittings and fixture, bracket or wall to wall bracket, Lattu complete all as specified and as directed.

Supply only liquid water proofing compound complete complete all as specified and as directed.

M&L for preparing plastered or unplastered old surfaces on walls including brooming down or steel wire brushing, scraping down smoke soots etc and applying one coat of oil emulsion distemper white or tinted complete all as specified and as directed.

Description all per ser item No. 99.00 above but as on celling complete all as specified and as directed.

M&L for complete removal of existing treatment including preparing old surfaces on walls and applying two coats of distemper oil emulsion white or tinted over a coat of primer complete all as specified and as directed.

M&L for applying 1mm (average) thickness cement base wall care putty over old/new wall plastered surfaces, preparatory to distempering getting even and smooth surface complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Description all as per ser item No. 103.00 above but not exc 10cm width or girth complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Description all as per ser item No. 105.00 above but not exc 10cm width or girth complete all as specified and as directed.

M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes as per list of makes, viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying One coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface including applying 1mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth and for G+3 Buildings complete all as specified and as directed.

M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes as per list of makes, viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying one coat of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface, sand papering make surface smooth and for G+3 Buildings complete all as specified and as directed.

M&L preparation of old decorated external wall/ceiling surface by mechanised sander of berger paints or equivalent makes as per list of makes, viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible, making surface smooth and applying one coats of cement base paint on walls complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S&F in reparis for bib taps 15mm bore, cast copper alloy with crutch or butter fly handle, chromium plated, screwed down, screws for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in reparis for pillar cock 15mm bore, foam flow cast copper alloy chromium plated, capstan heads, screwed down high pressure complete all as specified and as directed.

S&F in reparis for brass CP mixer 15mm for WHB mixing hot & cold water, foam flow chromium plated, fancy type, screwed down high pressure complete all as specified and as directed.

S&F in repairs for stop valves, 15mm bore, cast copper alloy chromium plated, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs for 2-in-1 angle valve, 15mm bore, cast copper alloyy chromium plated, fancy type, screwed down, high pressure with cruth or butterfly handle, screwd both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs brass chromium plated shower roses 125mm with swivel joints, any size, with and including minimum 200mm long CP arms fixing to steel pipe or union complete all as specified and as directed.

S&F in repair PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets with and including PVC flush pipe of 32 mm bore of required length and connection to pipes etc complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S&F in repairs 32 mm dia PVC waste pipe suitable for waste coupling 32mm/40mm mm dia 1000mm long complete all as specified and as directed.

S&F in repair CP towel ring fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair tubular towel rail, 20mm dia, brass chromium plated, D type, 60cm long between flange including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S& F in repairs 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 15mm-90gms

S &F in repairs 15mm stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 90gms)

S &F in repairs 20mm stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 92gms)

S &F in repairs 15mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 90gms)

S &F in repairs 20mm Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 125gms)

S&F in repairs grating doom 125mm dia of PTMT (minimum weight 40gms) with waste hole complete all as specified and as directed.

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including sink coupling and bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, overall size (915mm x 460mm) bowl size (410mm x 330mm x160mm) complete all as specified and as directed.

S&F in repair sink made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including sink coupling bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe, over all size 495mmx420mm, bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S&F in repairs stainless steel plate rack of overall size 600mmx900mm and weight not less than 6 Kgs as approved complete all as specified and as directed.

S&F in repairs cast copper alloy CP health faucet with 1 mtr tube and hook complete all as specified and as directed.

S&F in repair vitreous china squatting pan white Orissa patern size (580x440)mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron 'P' trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor complete all as specified and as directed.

S&F in repair white European water closet set vitreous china including cast iron 'P' trap including lime concrete bedding and making good the disturbed portion to match with the existing surface of floor fixed complete all as specified and as directed.

S&F in repairs plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed complete all as specified and as directed.

S&F wash hand basin vitreous China flat back (550x400)mm size white including CI bracket complete all as specified and as directed.

S&F in repair CP waste coupling 32mm size, fixed to WHB/Sink complete all as specified and as directed.

M&L for replacement of MS brackets with 2 Nos (35x35x5)mm angle iron and two coats of synthetic enamel paint over a coat of red oxide primer of required length for placing the WHB/Sink etc including taking down and refixing of existing WHB/Sink etc and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B1 as required complete all as specified and as directed.

Cleaning of PVC over head service tank of capacity exceeding 250 litres but not exceeding 500 litres, cleaning by brooming, removing all dirt, vegetation grown on roof, around tank if any, washing the tank with approved bleaching powder rendering it clean to store potable water after applying two coats of lime wash internally including writing the date of cleaning and capacity of tank with white synthetic enamel paint (letters not exceeding 30 centimetre height) on the outlet surface directly visible complete all as specified and as directed.

S&F in replacement of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall and fixed with self tapping screws complete all as specified and as directed.

M & L for providing cement concrete type C1 (1:3:6) (using 20mm graded stone aggregate) as in roof padding/coping to parapet wall /kerbs in roof to maintain the slope including water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note:- WPC shall be measured and paid seperately.

M&L for APP based modified prefaricated five layer 3mm thickness and weighing not less than 3.6 Kg/sqm water proofing membrane reinforced with polyster non woven fabric mat with 150gm/Sqm black finished with compatible primer confirming to IS 3488@ 0.3 lit/sqm and bonding material85/25 bitumen 1.2 kg/sqm before and after laying membrane laid by torch application side overlap of 75mm and overlap of 100mm longitudinally, at the junction of roof and parapet wall a grove of 75 mm wide and 65 mm deep and shaping horizontal of groov with (1:3) with bituminous mastic joints/ overlap shall be sealed with hot bitumen 85/25 and applying 2 coat of water proof aluminium paint including preparation of newly or previously untreated surfaces of any description, over 10cm width or girth, not otherwise described complete all as specified and directed. Note:- (a) The rate of necessary scaffolding wherever required shall be deemed to be included in the quoted rate of item. (b) Each step must be approved by Engr in Charge and GE before proceeding to next step complete all as specified and directed. (c) Ponding test shall be carried out by contractor.

M&L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per sqm including cleaning surfaces complete all as specified and as directed.

M&L for cement concrete type D2 (1:4:8) (using 40mm graded crushed stone aggregate) as in sunken floor complete all as specified and as directed.

JAIPAL AND BROTHERS

GIR RAJ BUILDERS

Gaurav India Corporations

VIJAY KUMAR GUPTA

M/S SHRINARAYAN MEENA

DEV CONSTRUCTION

Shiv Shankar Nirman Co.

M/S Parshant Associates